Sony Mdrxb950btb Owners Manual

Wireless  Stereo  Headset
MDR -XB950BT
Using the supplied headphone  cable
You can use the headset as ordinary wired headphones  by connecting a device via the supplied  headphone  cable. The
headset can be charged while in use. 1.  Connect  a playback  device to the INPUT jack with the supplied  headphone  cable.
If you connect  the headphone  cable when the headset is  on, the headset turns  off automatically.
Note
Make  sure  you connect  the L-shaped plug to the playback  device.
Use the supplied...

Wireless  Stereo  Headset
MDR -XB950BT
Listening  to music  from a device connected  via  BLUETOOTH
You can enjoy listening to music and basic remote control  operation of a BLUETOOTH device via a BLUETOOTH
connection. The  BLUETOOTH device is  required to support the following BLUETOOTH profiles.
A2DP (Advanced Audio Distribution  Profile):  
enables  you to enjoy high-quality audio  content wirelessly.
AVRCP  (Audio Video Remote  Control  Profile):  
enables  you to adjust volume,  etc.
The  operation...

or portable TV that supports SCMS-T content protection.
Depending on the BLUETOOTH device, it may be necessary to adjust the volume  or set the audio  output setting  on
the BLUETOOTH device.
Related TopicHow  to make a  wireless connections to BLUETOOTH devices
Controlling  the  audio device (BLUETOOTH connection)
Disconnecting BLUETOOTH connection (after  use)
Using  the  Electro Bass Booster function
Switching the  sound quality mode
4 -546 -438 -11(1)
Copyright  2014 Sony  Corporation
79  

Wireless  Stereo  Headset
MDR -XB950BT
Controlling the audio device (BLUETOOTH connection)
If the BLUETOOTH device supports AVRCP,  you can control  it by the buttons on the headset. The  functions  available
may vary depending on the BLUETOOTH device. Refer  to the operating instructions supplied  with your  BLUETOOTH
device.
Each button has the following function:
:
Press once during pause  to start  playback.
Press and hold for 2 seconds  during playback  to stop.
Press once during playback  to...

Wireless  Stereo  Headset
MDR -XB950BT
Disconnecting  BLUETOOTH connection (after  use)
When you finish playing music with the BLUETOOTH device, perform  any of the following operations to terminate the
BLUETOOTH connection.
If using a device that supports one-touch  connection (NFC), touch  the device to the headset again.
If using a device that does not support one-touch  connection (NFC), operate from the BLUETOOTH device.
Press and hold the POWER  button on the headset for about  2 seconds  to turn...

Wireless  Stereo  Headset
MDR -XB950BT
Electro Bass Booster function
The  Electro Bass  Booster  function  enhances low  frequencies.  You can turn  on or off the Electro Bass  Booster  function
simply by pressing a button.
Related Topic Using  the  Electro Bass Booster function
4 -546 -438 -11(1)
Copyright  2014 Sony  Corporation
Help Guide
How  to Use
82  

Wireless  Stereo  Headset
MDR -XB950BT
Using the Electro Bass Booster function
You can enhance low  frequencies thanks  to the Electro Bass  Booster  function. 1.  When the headset is  on, press  the BASS BOOST  button.
The   BASS BOOST  indicator (orange) lights up.
To turn off the Electro  Bass Booster  function
Press the BASS BOOST  button again.
Note
Since  the function  amplifies  certain  low  frequencies,  the effect  may not be obtained with music that does not contain
the frequencies to be...

Wireless  Stereo  Headset
MDR -XB950BT
Switching  the sound quality mode
The  sound  quality is  set to the “Standard”  mode  (SBC high quality mode) as the default  setting.
When using an AAC or aptX compatible device, select the “Priority  on sound  quality”  mode.
If the connection is  unstable, such as when producing only intermittent  sound,  select the “Priority  on stable
connection” mode.
To check the current sound  quality mode, see “ Checking the sound  quality mode.”
1 .  Turn on the headset...

Related TopicChecking  the  sound quality mode
4 -546 -438 -11(1)
Copyright  2014 Sony  Corporation
85  

Wireless  Stereo  Headset
MDR -XB950BT
Checking the sound quality mode
When the sound  quality mode  is  switched, the headset indicates  the remaining battery charge by flashing  the indicator in
red  first, and then  in blue to indicate  the sound  quality mode. You can check the current sound  quality mode  by the
number of flashes of the indicator (blue).
To check the current sound  quality mode  when the unit is  turned on, hold the POWER  button down and press  the VOL+
or VOL -  button within...