Sony Mdrxb950btb Owners Manual

Wireless  Stereo  Headset
MDR -XB950BT
Available operating time
The  available  operating time of the headset on fully-charged battery are  as follows:
Music playback  time: Max. 20 hours  (SBC/AAC)/Max.  20 hours  (aptX)
Communication  time: Max. 20 hours
Standby time: Max. 200 hours
About 7 hours  of continuous communications  is  possible after  1 hour  charging.
Note
Usage hours  may be shorter depending on the Codec and the conditions  of use.
4 -546 -438 -11(1)
Copyright  2014 Sony  Corporation...

Wireless  Stereo  Headset
MDR -XB950BT
Checking the remaining battery charge
You can check the remaining battery charge of the rechargeable battery.
When you turn  on the headset by pressing the POWER  button, the indicator (red) flashes.  You can check the remaining
battery charge by the number of times the indicator (red) flashes.
You can also check the remaining battery charge when the headset is  turned on. Pressing the POWER  button will cause
the indicator to flash and show the remaining battery...

A: Remaining battery charge of the headset
B : High
C : Medium
D : Low (needs to charge)
Note
If you connect  the headset to an iPhone, iPad  or iPod  touch  with “Media  audio ” (A2DP) only in a multi point
connection, the remaining battery charge will not be displayed  correctly.
4 -546 -438 -11(1)
Copyright  2014 Sony  Corporation
49  

Wireless  Stereo  Headset
MDR -XB950BT
What  you  can  do with the BLUETOOTH function
The  headset uses BLUETOOTH wireless technology, allowing you to listen to music or make  phone calls  wirelessly.
Listening to music
You can receive  audio  signals from a smartphone, mobile  phone, or music player  to enjoy music wirelessly.
Talking on the phone
You can make  and receive  a call  with your  hands  free,  while leaving your  smartphone or mobile  phone in your  bag or
pocket.
4 -546 -438 -11(1)...

Wireless  Stereo  Headset
MDR -XB950BT
How  to make a wireless  connections  to BLUETOOTH devices
You can enjoy music and hands -free  calling with the headset wirelessly by using your  device’s BLUETOOTH function.
How  to connect  devices via the BLUETOOTH function  differs  depending on whether or not the device supports one-
touch  connection (NFC).
Connecting the headset to a device that supports one -touch connection (NFC)
By touching the headset to an NFC-compatible smartphone, the headset turns...

Wireless  Stereo  Headset
MDR -XB950BT
One-touch connection (NFC) with a smartphone  (Android 4.1 or later)
By touching the headset with a smartphone, the headset turns  on automatically and then  pairs and makes  a
BLUETOOTH connection.
Compatible  smartphones
One-touch  connection (NFC)  with the following smartphone is  shown here.
NFC-compatible smartphones with Android  4.1 or later  installed
NFC
NFC (Near  Field Communication) is  a technology enabling short -range wireless communication  between...

To disconnect, touch  the smartphone again.
To connect  a paired smartphone, perform  steps 2 and 3.
Hint
If you cannot  connect  the headset, try the following.
Unlock the  screen  of the  smartphone,  and move the  smartphone slowly over  the  N marked  part of the  headset.
If  the  smartphone is in  a  case,  remove  the  case.
If you touch  an NFC-compatible smartphone with the headset, the smartphone terminates BLUETOOTH connection
with any current device, and connects  to the headset (One -touch...

Wireless  Stereo  Headset
MDR -XB950BT
One-touch connection (NFC) with a smartphone  (Android 2.3.3 or later, and  less than  Android 4.1)
By touching the headset with a smartphone, the headset turns  on automatically and then  pairs and makes  a
BLUETOOTH connection.
Compatible  smartphones
One-touch  connection (NFC)  with the following smartphone is  shown here.
NFC-compatible smartphones with Android  2.3.3  or later  (excluding Android  3.x)
NFC-compatible smartphones with Android  4.1 or less
NFC...

5.  Touch the headset with the smartphone.
Confirm  that the screen  of the smartphone is  unlocked.
Touch the smartphone on the N  marked part  of the headset. Keep touching the headset with the smartphone until
the smartphone reacts.
Refer  to the operating instructions of the smartphone for the designated location  to be touched on the
smartphone.
Follow the on-screen  instructions to complete the pairing  and connection.
When the headset is  connected with the smartphone, the blue indicator starts...

Wireless  Stereo  Headset
MDR -XB950BT
Disconnecting  the smartphone  by one  touch (NFC)
You can disconnect the headset from the connected smartphone by touching the headset with it. 1.  Unlock the screen  of the smartphone.
If you installed the app “ NFC Easy Connect” in the smartphone, start  the app “ NFC Easy Connect.”
2 .  Touch the headset with the smartphone.
Touch the smartphone on the N  marked part  of the headset.
Note
After the headset is  disconnected from the smartphone, if no operation is...