Sony Lmd 2050w Operating Instructions

Adjustment Using the Menus21 
MATRIX
COMPONENT LEVEL
NTSC SETUP
SCAN
FORMAT DISPLAY
LANGUAGE
POWER SAVING
PICTURE DELAY MIN
MARKER SETTING
MARKER ENABLE
MARKER SELECT
CENTER MARKER
SAFETY AREA
MARKER LEVEL
MARKER MAT
MULTI DISPLAY SETTING
MULTI DISPLAY ENABLE
MULTI DISPLAY
SUB INPUT SELECT
POSITION
FRAME
SUB PICTURE SIZE
WAV E  F O R M
FUNCTION BUTTON SETTING
F1 BUTTON
F2 BUTTON
F3 BUTTON
F4 BUTTON
CLOSED CAPTION SETTING
For the composite or Y/C input
CLOSED CAPTION ENABLE
CAPTION VISION
For a signal...

Adjustment Using the Menus 22
For the DVI/HD15 input
 Signal format


 Color temperature
 Power saving
 Model name and serial number
 OPTION A and serial number
 OPTION B and serial number
COLOR TEMP/SPACE menu
The COLOR TEMP/SPACE menu is used for adjusting 
the picture white balance or color space. 
You need to use the measurement instrument to adjust 
the white balance.
Recommended: Konica Minolta color analyzer CA-210
USER CONTROL menu
The USER CONTROL menu is used for adjusting the 
picture.
Items...

Adjustment Using the Menus23 
For the video input
Submenu Setting
AU TO  C H RO M A /
PHASEAdjusts color intensity (CHROMA) 
and tones (PHASE). 
AUTO ADJ VALUE: Selects 
ON or OFF of the auto 
adjustment.  When you set 
to OFF, this parameter is 
reset to the factory setting.  
When you set to ON, the 
automatically adjusted value 
is enabled.
START: The auto adjustment 
starts when you display the 
color bar signals (Full/
SMPTE/EIA) on the screen 
and press the ENTER 
button.  After adjusting the...

Adjustment Using the Menus 24
For the DVI/HD15 input
Submenu Setting
SUB CONTROL Adjusts finely the adjustment range 
of the button on the front panel for 
CONTRAST, BRIGHTNESS, 
CHROMA and PHASE.
CONTRAST: Adjusts the picture 
contrast. 
BRIGHTNESS: Adjusts the 
picture brightness.
CHROMA: Adjusts color 
intensity.  The higher the 
setting, the greater the 
intensity.  The lower the 
setting, the lower the 
intensity.  
PHASE: Adjusts color tones.  
The higher the setting, the 
more greenish the...

Adjustment Using the Menus25 
USER CONFIG menu
The USER CONFIG menu is used for setting the 
system, marker, multi display, function button, closed 
caption and audio.
SYSTEM SETTING
Submenu Setting
MATRIX Applied to 480/60I or 480/60P 
signal.  Select 601 or 709.
COMPONENT LEVEL Selects the component level from 
among three modes.
SMPTE: for 100/0/100/0 signal
BETA 0: for 100/0/75/0 signal 
BETA 7.5: for 100/7.5/75/7.5 
signal
NTSC SETUP Selects the NTSC setup level from 
two modes.
The 7.5 setup level...

Adjustment Using the Menus 26
Scan mode image
MARKER SETTING
LMD-2050W:
1400 × 1050
LMD-2450W:
1600 × 1200LMD-2050W:
1680 × 945
LMD-2450W:
1920 × 1080
LMD-2050W:
1470 × 1050
LMD-2450W:
1680 × 1200LMD-2050W:
1680 × 992
LMD-2450W:
1920 × 1134
–
LMD-2050W:
1680 × 1050
LMD-2450W:
1920 × 1200
–LMD-2050W:
1680 × 1050
LMD-2450W:
1920 × 1080
Input
4
316
9
NORMAL
(zeroscan)
4:316: 9
OVER
(5 % over scan)
4
316
9
FULL
16
9
NATIVE
(1080i)
–LMD-2050W:
1280 × 720
LMD-2450W:
1280 × 720
Submenu Setting
MARKER ENABLE...

Adjustment Using the Menus27 
MULTI DISPLAY SETTING
SAFETY AREA Selects the safe area size for the 
aspect ratio determined by the 
button which the aspect function is 
assigned.
You can select from among OFF, 
80%, 85%, 88%, 90% and 93%.
When the marker is displayed, the 
safe area for the marker is 
displayed.
MARKER LEVEL Sets the luminance to display the 
MARKER SELECT, CENTER 
MARKER and SAFETY AREA.  
You can select from among 1 to 3.  
When the setting is low, the marker 
is displayed dark.
MARKER...

Adjustment Using the Menus 28
FUNCTION BUTTON SETTINGAbout the function assigned to the 
function button
SCAN
Press to change the scan size of the picture according to 
the setting of “STANDARD” or “FULL+NATIVE” 
selected in SCAN (page 25).
ASPECT
Press to set the aspect ratio of the picture, 4:3 or 16:9.
Note
The panel of the monitor is 16:10.
When the 16:9 signal is displayed, black bars appear in 
the upper and lower positions of the display.  This is not 
a malfunction.  (See “Scan mode image” on...

Adjustment Using the Menus29 
For finer according to the input signal, see “DOT 
PHASE” on page 24.
When the menu screen is displayed, the APA does not 
function.
Note
If the APA operation does not finish correctly depending 
on the input signal, adjust DOT PHASE (page 24).
CLOSED CAPTION SETTING
For the composite or Y/C input
For a signal input from a BKM-244CC 
(when a BKM-244CC is installed)
AU DIO  S ET T ING
Submenu Setting
CLOSED 
CAPTION 
ENABLESelect ON to display closed caption and 
OFF not to...

Adjustment Using the Menus 30
REMOTE menu
Submenu Setting
INPUT SELECT Selects the input audio signal.
ALL:  The sound except from 
BKM-220D and BKM-243HS is 
output.
COMPOSITE:  When the 
COMPOSITE button is pressed, 
the sound is output.
Y/C:  When the Y/C button is 
pressed, the sound is output.
RGB:  When the RGB button is 
pressed, the sound is output.
COMPONENT:  When the 
COMPONENT button is 
pressed, the sound is output.
HD15: When the HD15 button 
is pressed, the sound is output.
DVI: When the...