Sony Lmd 2050w Operating Instructions

3-100-042-13 (1)
LCD Monitor
© 2007 Sony Corporation
LMD-2050W
LMD-2450W
Operating Instructions 
 

2
Owner’s Record
The model and serial numbers are located at the rear. 
Record these numbers in the spaces provided below. 
Refer to these numbers whenever you call upon your 
Sony dealer regarding this product.
Model No. ____________________
Serial No. ____________________
WA R N I N G
To reduce the risk of fire or electric shock, do 
not expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the 
cabinet.  Refer servicing to qualified personnel 
only.
WARNING
THIS APPARATUS...

3 
WARNING
When installing the unit, incorporate a readily 
accessible disconnect device in the fixed wiring, or 
connect the power cord to an easily accessible socket-
outlet near the unit.  If a fault should occur during 
operation of the unit, operate the disconnect device to 
switch the power supply off, or disconnect the power 
cord.
For kundene i Norge
Dette utstyret kan kobles til et IT-
strømfordelingssystem.
For the customers in the USA
Lamp in this product contains mercury. Disposal of 
these...

Table of Contents4
Table of Contents
Precaution .............................................................. 5
On Safety ............................................................ 5
On Installation  .................................................... 5
Handling the LCD Screen  .................................. 5
About the Fluorescent Tube  ............................... 5
On Cleaning  ....................................................... 5
On Repacking...

Precaution5 
Precaution
On Safety
 Operate the unit only with a power source as specified 
in the “Specifications” section.
 A nameplate indicating operating voltage, etc., is 
located on the rear panel.
 Should any solid object or liquid fall into the cabinet, 
unplug the unit and have it checked by qualified 
personnel before operating it any further.
 Do not drop or place heavy objects on the power cord. 
If the power cord is damaged, turn off the power 
immediately. It is dangerous to use the unit...

Features 6
On Repacking
Do not throw away the carton and packing materials. 
They make an ideal container which to transport the 
unit. 
On Mounting on a Rack
Leave 1U space empty above and below the monitor to 
ensure adequate air circulation or install a fan to 
maintain the monitor’s performance.
If you have any questions about this unit, contact your 
authorized Sony dealer.
On Fan Error (LMD-2450W)
The fan for cooling the unit is built in. When the fan 
stops and the RETURN button on the front panel...

Features7 
Rack mount
The monitor supports the VESA (100 × 100) standard.
The LMD-2050W may be mounted on an EIA-standard 
19-inch rack (using an optional mounting bracket).
Tw o - d i s p l ay
Two kinds of input signals are put on the monitor.
For more information, refer to MULTI DISPLAY of 
“MULTI DISPLAY SETTING” on page 27.
Input signal waveform and audio level display
The waveform of the input signal or the audio level 
(embedded audio only) is displayed as the sub display.
For more information,...

Location and Function of Parts and Controls 8
Location and Function of Parts and Controls
Front Panel
aTally lamp
You can check the status of the monitor by the color of 
the tally lamp.
The tally lamp lights in red, green or amber according to 
the setting of PARALLEL REMOTE in the REMOTE 
menu.
b1 (standby) switch and indicator
When you press the switch to turn on the power in 
standby mode (the a/? switch on the rear panel is turned 
on), the indicator lights in green. 
When you press this switch...

Location and Function of Parts and Controls9 
+/– buttons
Press to select the items and setting values.
ENTER button
Press to confirm a selected item on the menu.
When the menu is not displayed and the button is 
pressed, the distinguished signal format is displayed.
RETURN button
When the menu is displayed and the button is pressed, 
the value of an item is reset to the previous value.
When the menu is not displayed and the button is 
pressed, the function selected in FUNCTION 
BUTTON SETTING of the...

Location and Function of Parts and Controls 10
Input signals and adjustable/setting items
a : Adjustable/can be set
× : Not adjustable/cannot be set
*1 Adjustment of SUB CONTROL is the same.
*2 When a component signal (480/60I or 480/60P) is 
input and the COMPONENT LEVEL is set to 
SMPTE, this can be switchable.
*3 When a BKM-227W is installed, the number of the input connector is increased.
*4 When a BKM-229X is installed, the number of the 
input connector is increased.
*5 When a BKM-220D, BKM-243HS...