Sony Lmd 1410 Operating Instructions

Using the Menu21
3Press the M or  m button to select the following 
menu, then press the  , or ENTER button.
LMD-1410/2010:  USER CONFIG (User 
Configuration) menu
LMD-1420/2020:  USER CONFIG 1/2 (User 
Configuration 1/2) menu
The setting items (icons) in the selected menu are 
displayed in yellow.
LMD-1410/2010
.
LMD-1420/2020
4Press the  M or  m button to select “LANGUAGE,” 
then press the  , or ENTER button.
The selected item is displayed in yellow.
5Press the  M or  m button to select a language,...

Adjustment Using the Menus 22
LMD-1420/2020
3Select an item.
Use the M or m button to select the item, then press 
the , or ENTER button.
The item to be changed is displayed in yellow.
Note
If the menu consists of multiple pages, press M or 
m to go to the desired menu page.
4Make the setting or adjustment on an item.
When changing the adjustment level:
To increase the number, press the M button.
To decrease the number, press the m button.
Press the ENTER button to confirm the number, 
then restore the...

Adjustment Using the Menus23
REMOTE PARALLEL
1 PIN
2 PIN
3 PIN
4 PIN
6 PIN
7 PIN
8 PIN
KEY INHIBIT
KEY INHIBIT
Adjusting and Changing the 
Settings
STATUS menu
The STATUS menu is used to display the current status 
of the unit. The following items are displayed:

 Color temperature
 Gamma
 Component level

 RGB/COMP SEL



COLOR TEMP/BAL menu
The COLOR TEMP/BAL menu is used for adjusting the 
picture white balance. 
You need to use the measurement instrument to adjust 
the white balance.
Recommended:...

Adjustment Using the Menus 24
USER CONFIG menu
You can select a language, etc.
Items that cannot be adjusted depending on the input 
signal are displayed in blue.
LMD-1410/2010
.
LMD-1420/2020
Submenu Setting
CONTROL You can adjust the picture.
CONTRAST: Adjusts the picture 
contrast. 
BRIGHT: Adjusts the picture 
brightness.
CHROMA: Adjusts color intensity.  
The higher the setting, the greater 
the intensity.  The lower the setting, 
the lower the intensity.  
PHASE: Adjusts color tones.  The 
higher...

Adjustment Using the Menus25
REMOTE PARALLEL menu
Select the PARALLEL REMOTE connector pins for 
which you want to change the function. 
You can assign various functions to 1 to 4 pins and 6 to 
8 pins. The following lists the functions you can assign 
to the pins. – – –  (“– – –”: No function is assigned.)



 16:9

 UNDER
 NORMAL
 ZOOM (LMD-1420/2020 only)
 TALLY R (LMD-1420/2020 only)
 TALLY G (LMD-1420/2020 only)
 EXT SYNC (LMD-1420/2020 only)
 BLUE ONLY (LMD-1420/2020 only)
 16:9 MARKER...

Troubleshooting / Specifications26
Troubleshooting
This section may help you isolate the cause of a problem 
and as a result, eliminate the need to contact technical 
support.
The display is colored in green or purple t Select 
the correct input by pressing RGB/COMPONENT 
button. 
The unit cannot be operated t The key protection 
function works.  Set the KEY INHIBIT setting to OFF 
in the KEY INHIBITmenu.
Specifications
Picture performance
LCD panel a-Si TFT Active Matrix
Picture size LMD-1410/1420: 14...

Specifications27
OPTION AUDIO input jacks (LMD-1420/2020)
RCA pin (2), –5 dBu 47 kilohms or 
higher
External synchronized input (LMD-1420/2020)
BNC type (1), 0.3 to 4 Vp-p 
negative polarity binary
PARALLEL REMOTE input terminal
Parallel remote
Modular connector 8-pin (1)
Output
LINE A output connectors
Y/C output  4-pin mini-DIN (1), Loop-through, 
with 75 ohms automatic terminal 
function
VIDEO output 
BNC type (1), Loop-through, with 75 
ohms automatic terminal function
AUDIO output 
RCA pin (1),...

Specifications 28
Pin assignment
PARALLEL REMOTE terminal 
Modular connector
(8-pin)
You can allocate functions using the REMOTE 
PARALLEL menu (see page 25). 
Wiring required to use the Remote Control
Connect the function you want to use with a Remote 
Control to the Ground (Pin 5).
Video signal formats
The unit is applicable to the following signal formats.
When an optional input adaptor is installed, the unit is applicable to the following signal formats.
When BKM-320D is installed
18Pin number...

Dimensions29
Dimensions
LMD-1410/1420
Front
RearSide
Bottom
LINE A LINE B SDI SCAN ASPECTRESETMENU VOLUME POWER
KEY
INHIBIT
ENTER RGB/
COMPONENTEXT
SYNCBLUE
ONLY
343 (13 5/8)
138.1 (5 
1/2) 165.9 (6 
5/8)
213.8 (8 
1/2) 2.5 
(
1/8)
LINE A
LINE B PARALLEL REMOTE RGB/COMPONENTOPTION
AUDIO IN
OPTION IN
VIDEOIN OUTVIDEOIN OUTG/YIN OUTB/PBIN OUTEXT
SYNCIN OUTR/PRIN OUTAUDIOIN OUTAUDIOIN OUTAUDIOIN OUTAC IN
100 (4)
36 (1 
7/16)
100 (4)
76.2  
(3)
96.8 (3 
7/8)
67.7  
(2 3/4)
264.4 (10 1/2)
86.8 (3 1/2)
204.3...

Dimensions 30
LMD-2010/2020
Front
RearSide
Bottom
470 (18 5/8)
182.3 (7 
1/4) 211.7 (8 
3/8)
256.8 (10 
1/8) 2.5  
(
1/8)
LINE A LINE B SDI SCAN ASPECTRESETMENU VOLUME POWER
KEY
INHIBIT
ENTER RGB/
COMPONENTEXT
SYNCBLUE
ONLY
LINE A
LINE B PARALLEL REMOTE RGB/COMPONENTOPTION
AUDIO IN
OPTION INVIDEOIN OUTVIDEOIN OUTG/YIN OUTB/PBIN OUTEXT
SYNCIN OUTR/PRIN OUTAUD I OIN OUTAUD I OIN OUTAUD I OIN OUTAC IN
100 (4)
100 (4)
34.7 (1 
3/8)
87 (3 1/2)
96.8  
(3 
7/8)
67.7  
(2 3/4)
264.4 (10 1/2)
80.6  
(3 1/4)
204.3...