Sony Lmd 1410 Operating Instructions

							
Using the Menu21
3Press the M or  m button to select the following 
menu, then press the  , or ENTER button.
LMD-1410/2010:  USER CONFIG (User 
Configuration) menu
LMD-1420/2020:  USER CONFIG 1/2 (User 
Configuration 1/2) menu
The setting items (icons) in the selected menu are 
displayed in yellow.
LMD-1410/2010
.
LMD-1420/2020
4Press the  M or  m button to select “LANGUAGE,” 
then press the  , or ENTER button.
The selected item is displayed in yellow.
5Press the  M or  m button to select a language, then 
press the ENTER button.
The menu changes to the selected language.
LMD-1410/2010
.
LMD-1420/2020
To clear the menu
Press the MENU button.
The menu disappears automatically if a button is not 
pressed for one minute.
Using the Menu
The unit is equipped with an on-screen menu for making 
various adjustments and settings such as picture control, 
input setting, set setting change, etc.  You can also 
change the menu language displayed in the on-screen 
menu.
To change the menu language, see “Selecting the Menu 
Language” on page 20.
The current settings are displayed in place of the  x
marks on the illustrations of the menu screen.
1Press the MENU button.
The menu appears.
The menu presently selected is shown as a yellow 
button.
2Use the  M or  m button to select a menu, then press 
the  , or ENTER button.
The menu icon presently selected is shown in 
yellow and setting items are displayed.
LMD-1410/2010
.
 · RGB/COMP  SEL  xxxx
 · COMP   LEVEL  xxxxx
 · NTSC   SETUP  x
 · GAMMA  x
 · FORMAT   DISP  xxxx
x LANGUAGE ENGLISH
 · PIC  DELAY  MIN  xxx
USER CONFIG
 · RGB/COMP  SEL 
xxxx
 · COMP   LEVEL  xxxxx
 · NTSC   SETUP  x
 · GAMMA  x
 · FORMAT   DISP  xxxx
x LANGUAGE ENGLISH
USER CONFIG  (1/2) 
Rr
 · RGB/COMP  SEL  xxxx
 · COMP   LEVEL  xxxxx
 · NTSC   SETUP  x
 · GAMMA  x
 · FORMAT   DISP  xxxx
x LANGUAGE ENGLISH
 · PIC  DELAY  MIN  xxx
USER CONFIG
 · RGB/COMP  SEL 
xxxx
 · COMP   LEVEL  xxxxx
 · NTSC   SETUP  x
 · GAMMA  x
 · FORMAT   DISP  xxxx
x LANGUAGE ENGLISH
USER CONFIG  (1/2) 
Rr
RESET MENU VOLUME POWER
KEY
INHIBIT
ENTER
LINE A LINE B SDI SCAN ASPECTRESET MENU VOLUME POWER
KEY
INHIBIT
ENTER
RGB/
COMPONENT EXT
SYNC BLUE
ONLY
2~4 1
CONTROL
CONTRAST x
 ·  ·
BRIGHT x
 ·  CHROMA  x
 ·  PHASE  x
 ·  APERTURE  xxx
 ·  ASPECT  xxx
USER CONTROL
 · RGB/COMP  SEL 
xxxx
 · COMP   LEVEL  xxxxx
 · NTSC   SETUP  x
 · GAMMA  x
 · FORMAT   DISP  xxxx
x LANGUAGE ENGLISH
 · PIC  DELAY  MIN  xxx
USER CONFIG
 
						

							Adjustment Using the Menus 22
LMD-1420/2020
3Select an item.
Use the M or m button to select the item, then press 
the , or ENTER button.
The item to be changed is displayed in yellow.
Note
If the menu consists of multiple pages, press M or 
m to go to the desired menu page.
4Make the setting or adjustment on an item.
When changing the adjustment level:
To increase the number, press the M button.
To decrease the number, press the m button.
Press the ENTER button to confirm the number, 
then restore the original screen.
When changing the setting:
Press the M or m button to change the setting.
Press the ENTER button to confirm the setting.
Notes
 An item displayed in blue cannot be accessed. 
You can access the item if it is displayed in white.
 If the key inhibit has been turned on, all items are 
displayed in blue. To change any of the items, 
turn the key inhibit to OFF first. 
For details on the key inhibit, see page 25.
To clear the menu
Press the MENU button.
The menu disappears automatically if a button is not 
pressed for one minute.
About the memory of the settings
The settings are automatically stored in the monitor 
memory.
To reset items that have been adjusted
Pressing the RESET button while you are adjusting any 
of the menu items resets the menu item to the previous 
setting.
Adjustment Using the 
Menus
Items
The screen menu of this monitor consists of the 
following items.
STATUS (the items indicate the 
current settings.)
FORMAT
COLOR TEMP
GAMMA
COMP LEVEL
NTSC SETUP
RGB/COMP SEL
SCAN MODE
DISPLAY
OPTION
COLOR TEMP/BAL
COLOR TEMP
MANUAL ADJ
USER CONTROL
CONTROL
USER CONFIG
RGB/COMP SEL
COMP LEVEL
NTSC SETUP
GAMMA
FORMAT DISP
LANGUAGE
MARKER (LMD-1420/2020 only)
CENTER MARKER (LMD-1420/2020 only)
SAFETY AREA (LMD-1420/2020 only)
MARKER LEVEL (LMD-1420/2020 only)
MARKER MAT (LMD-1420/2020 only)
SCAN (LMD-1420/2020 only)
PIC DELAY MIN
 · RGB/COMP  SEL xxxx
 · COMP   LEVEL xxxxx
 · NTSC   SETUP x
 · GAMMA x
 · FORMAT   DISP xxxx
xLANGUAGE ENGLISH USER CONFIG  (1/2) Rr
 
						

							Adjustment Using the Menus23
REMOTE PARALLEL
1 PIN
2 PIN
3 PIN
4 PIN
6 PIN
7 PIN
8 PIN
KEY INHIBIT
KEY INHIBIT
Adjusting and Changing the 
Settings
STATUS menu
The STATUS menu is used to display the current status 
of the unit. The following items are displayed:

 Color temperature
 Gamma
 Component level

 RGB/COMP SEL



COLOR TEMP/BAL menu
The COLOR TEMP/BAL menu is used for adjusting the 
picture white balance. 
You need to use the measurement instrument to adjust 
the white balance.
Recommended: Konicaminolta color analyzer CA-210
USER CONTROL menu
The USER CONTROL menu is used for adjusting the 
picture.
Items that cannot be adjusted depending on the input 
signal are displayed in blue.
FORMAT xxxxx
    xxxxxxxx
COLOR   TEMP xxxx
GAMMA x
COMP   LEVEL xxxxx
NTSC   SETUP xx
RGB/COMP SEL xxxx
SCAN MODE xxxx STATUS  (1/2) Rr
DISPLAY 
     LMD-1420 xxxxxxx
OPTION 
     BKM-320D  STATUS  (2/2) Rr
Submenu Setting
COLOR TEMP Select the color temperature from 
among HIGH, LOW and USER 
setting.  
MANUAL ADJ If you set the COLOR TEMP to 
USER setting, the item displayed is 
changed from blue to white, which 
means you can adjust the color 
temperature.
ADJUST GAIN...: Adjusts the 
color balance (GAIN). 
ADJUST BIAS...: Adjusts the 
color balance (BIAS). 
COPY FROM: If you select 
HIGH or LOW, the white 
balance data for the selected 
color temperature will be 
copied in the user setting.
xCOLOR   TEMP xxxx
MANUAL   ADJ
 · ADJUST   GAIN··· 
 · ADJUST   BIAS··· 
 · COPY   FROM xxx COLOR TEMP/BAL
CONTROL
xCONTRAST x
 ·  BRIGHT x
 ·  CHROMA x
 ·  PHASE x
 ·  APERTURE xxx
 ·  ASPECT xxx USER CONTROL
 
						

							Adjustment Using the Menus 24
USER CONFIG menu
You can select a language, etc.
Items that cannot be adjusted depending on the input 
signal are displayed in blue.
LMD-1410/2010
.
LMD-1420/2020
Submenu Setting
CONTROL You can adjust the picture.
CONTRAST: Adjusts the picture 
contrast. 
BRIGHT: Adjusts the picture 
brightness.
CHROMA: Adjusts color intensity.  
The higher the setting, the greater 
the intensity.  The lower the setting, 
the lower the intensity.  
PHASE: Adjusts color tones.  The 
higher the setting, the more 
greenish the picture.  The lower the 
setting, the more purplish the 
picture. 
APERTURE: Adjusts the picture 
sharpness.  The higher the setting, 
the sharper the picture.
For details of input signals and adjustable/
setting items, see page 14.
ASPECT (LMD-
1410/2010 only)Sets the aspect ratio of the picture to 4:3 or 
16:9.
x RGB/COMP  SEL xxxx
 · COMP   LEVEL xxxxx
 · NTSC   SETUP x
 · GAMMA x
 · FORMAT   DISP xxx
 · LANGUAGE xxx
 · PIC  DELAY  MIN xxx
  USER CONFIG
x RGB/COMP  SEL xxxx
 · COMP   LEVEL xxxxx
 · NTSC   SETUP x
 · GAMMA x
 · FORMAT   DISP xxx
 · LANGUAGE xxx
  USER CONFIG  (1/2) Rr
xMARKER xxx
 · CENTER   MARKER xxx
 · SAFETY   AREA xxx
 · MARKER   LEVEL x
 · MARKER   MAT xxx
 · SCAN xxxx
 · PIC  DELAY  MIN xxx USER CONFIG  (2/2) Rr
Submenu Setting
RGB/COMP SEL When a signal input via the RGB/
COMPONENT connector is being 
monitored, based on the signal being 
input, select RGB or COMP.
COMP LEVEL Select the component level from among 
three modes.
SMPTEfor 100/0/100/0 signal
BETA 0for 100/0/75/0 signal 
BETA 7.5for 100/7.5/75/7.5 signal
NTSC SETUP Select the NTSC setup level from two 
modes.
The 7.5 setup level is used mainly in 
North America. The 0 setup level is used 
mainly in Japan.
GAMMA Selects the appropriate gamma mode.  
You can select from among 5 settings.  
When “3” is selected, the setting is 
roughly same as the gamma mode of the 
CRT (2.2).
FORMAT DISP Select the display mode of the signal 
format.
ON: The format is always displayed.
OFF: The display is hidden.
AU TO: The format is displayed for 
about 10 seconds when the input 
of the signal begins.
LANGUAGE You can select the menu or message 
language from among seven languages. 
ENGLISH: English
DEUTSCH: German
FRANÇAIS: French
ITALIANO: Italian
ESPAÑOL: Spanish
: Japanese
: Chinese
MARKER When the frame of the film is displayed 
on the screen, select the aspect ratio 
according to the film.
 When 16:9 aspect ratio is selected 
with the ASPECT button
You can select from among 4:3, 
15:9, 14:9, 13:9 and OFF.
 When 4:3 aspect ratio is selected 
with the ASPECT button
You can select from among 16:9 
and OFF.
CENTER MARKER Select ON to display the center mark of 
the picture and OFF not to display.
SAFETY AREA Select the safe area size for the aspect 
ratio determined by the ASPECT button.
You can select from among OFF, 80%, 
85%, 88%, 90% and 93%.
MARKER LEVEL Sets the luminance to display the 
MARKER and SAFETY AREA.
When the setting is low, the marker is 
displayed dark.
MARKER MAT Selects whether you put mat on the 
outside of the marker display.
OFF: No mat is put.
HALF: Gray mat is put.
BLACK: Black mat is put.
 
						

							Adjustment Using the Menus25
REMOTE PARALLEL menu
Select the PARALLEL REMOTE connector pins for 
which you want to change the function. 
You can assign various functions to 1 to 4 pins and 6 to 
8 pins. The following lists the functions you can assign 
to the pins. – – –  (“– – –”: No function is assigned.)



 16:9

 UNDER
 NORMAL
 ZOOM (LMD-1420/2020 only)
 TALLY R (LMD-1420/2020 only)
 TALLY G (LMD-1420/2020 only)
 EXT SYNC (LMD-1420/2020 only)
 BLUE ONLY (LMD-1420/2020 only)
 16:9 MARKER (LMD-1420/2020 only)
 15:9 MARKER (LMD-1420/2020 only)
 14:9 MARKER (LMD-1420/2020 only)
 13:9 MARKER (LMD-1420/2020 only)
 4:3 MARKER (LMD-1420/2020 only)
 CENTER MARKER (LMD-1420/2020 only)
 SAFETY AREA 80% (LMD-1420/2020 only)
 SAFETY AREA 85% (LMD-1420/2020 only)
 SAFETY AREA 88% (LMD-1420/2020 only)
 SAFETY AREA 90% (LMD-1420/2020 only)
 SAFETY AREA 93% (LMD-1420/2020 only)
 SDI (LMD-1420/2020 only)
If you use the PARALLEL REMOTE function, you 
need to connect cables. For more details, see page 28.
KEY INHIBIT menu
You can lock the setting so that they cannot be changed 
by an unauthorized user.
Select OFF or ON.
If you set ON, all items are displayed in blue, indicating 
the items are locked.
SCAN Sets the scan size of the picture.  Select 
from “OFF” and “ZOOM” mode.
PIC DELAY MIN Selects to set the delay by the picture 
processing to the minimum level when 
the signal is input.
OFF: Mode for giving precedence to 
the picture quality (recommended 
mode). It takes longer than “ON” 
for processing the picture.
ON: The processing time is short. As 
the line flicker is displayed in this 
mode, it is available for checking 
the line flicker of the telop work 
and so on.
Input
NORMAL 
SCAN (5 % 
OV E R S C AN )
UNDER
SCAN
ZOOM
– Submenu Setting
4
316
9
Output3
4
9
16
x1PIN xxxxx
 · 2PIN xxxxx
 · 3PIN xxxxxxx
 · 4PIN xxxxxxx
 · 6PIN xxxxxxxx
 · 7PIN xxxxxxxxx
 · 8PIN xxxx REMOTE PARALLEL
xKEY   INHIBIT xxx KEY INHIBIT
 
						

							Troubleshooting / Specifications26
Troubleshooting
This section may help you isolate the cause of a problem 
and as a result, eliminate the need to contact technical 
support.
The display is colored in green or purple t Select 
the correct input by pressing RGB/COMPONENT 
button. 
The unit cannot be operated t The key protection 
function works.  Set the KEY INHIBIT setting to OFF 
in the KEY INHIBITmenu.
Specifications
Picture performance
LCD panel a-Si TFT Active Matrix
Picture size LMD-1410/1420: 14 type 
283 × 212 × 354 mm (W/H/
Diagonal) (11
1/4 × 83/8 ×14 inches)
LMD-2010/2020: 20 type
408 × 306 × 510 mm (W/H/
Diagonal) (16
1/8 × 121/8 ×201/8 
inches)
Resolution 640 × 480 dots (VGA)
Viewing angle 85°/85°/85°/85° (typical)
Scan Under –3 %
Normal 5 %
Aspect 4:3
Display color LMD-1410/1420: 16,200,000
LMD-2010/2020: 16,700,000
Input/output connectors
Input
LINE A input connectors
Y/C input 4-pin mini-DIN (1)
VIDEO input 
BNC type (1), 1 Vp-p 
±3 dB,  negative 
synchronization
AUDIO input 
RCA pin (1), –5 dBu 47 kilohms or 
higher
LINE B input connectors
VIDEO input 
BNC type (1), 1 Vp-p 
±3 dB,  negative 
synchronization
AUDIO input 
RCA pin (1), –5 dBu 47 kilohms or 
higher
RGB/COMPONENT input connectors BNC type (3) 
RGB input   0.7 Vp-p 
±3 dB, (Sync On Green, 0.3 
Vp-p negative sync.)
Component input
0.7 Vp-p 
±3 dB, (75 % chrominance 
standard color bar signal)
AUDIO input
RCA pin (1), –5 dBu 47 kilohms or 
higher
 
						

							Specifications27
OPTION AUDIO input jacks (LMD-1420/2020)
RCA pin (2), –5 dBu 47 kilohms or 
higher
External synchronized input (LMD-1420/2020)
BNC type (1), 0.3 to 4 Vp-p 
negative polarity binary
PARALLEL REMOTE input terminal
Parallel remote
Modular connector 8-pin (1)
Output
LINE A output connectors
Y/C output  4-pin mini-DIN (1), Loop-through, 
with 75 ohms automatic terminal 
function
VIDEO output 
BNC type (1), Loop-through, with 75 
ohms automatic terminal function
AUDIO output 
RCA pin (1), Loop-through
LINE B output connectors
VIDEO output 
BNC type (1), Loop-through, with 75 
ohms automatic terminal function
AUDIO output 
RCA pin (1), Loop-through
RGB/COMPONENT output connectors
RGB/Component output 
BNC type (3), Loop-through, with 
75 ohms automatic terminal 
function
AUDIO output
RCA pin (1), Loop-through
EXT SYNC output connector (LMD-1420/2020)
BNC type (1), Loop-through, with
75 ohms automatic terminal 
function
Built-in speaker output
0.5 W (mono)
General
Power AC100 – 240 V, 50/60 Hz
Power consumption
LMD-1410: Maximum: approx. 48 W 
1.2 A – 0.6 A
LMD-1420: Maximum: approx. 51 W 
1.2 A – 0.6 A
LMD-2010: Maximum: approx. 84 W 
1.2 A – 0.6 A
LMD-2020: Maximum: approx. 87 W 
1.2 A – 0.6 APeak inrush current
(1) Power ON, current probe method: 
90 A (LMD-1410/1420), 
64 A (LMD-2010/2020)
(2) Hot switching inrush current, 
measured in accordance with 
European standard EN55103-1: 
12 A (LMD-1410/1420/2010/2020)
Dimensions LMD-1410/1420: Approx. 343 × 354 × 
264 mm (not including the 
projection parts)
(13
5/8 × 14 ×101/2 inches) 
(w/h/d)
LMD-2010/2020: Approx. 470× 441 × 
264 mm (not including the 
projection parts)
(18
5/8 × 173/8 × 101/2 inches) 
(w/h/d)
Mass  LMD-1410: Approx. 6.5 kg 
(14 lb 5 oz)
LMD-1420: Approx.  6.8 kg 
(14 lb 16 oz)
LMD-2010: Approx. 8.7 kg 
(19 lb 3 oz)
LMD-2020: Approx. 9.2 kg 
(20 lb 5 oz)
Operating conditions
Temperature 0 °C to 35 °C (32 °F to 95 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 30% to 85% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature –10 °C to 40 °C (14 °F to 104 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC power cord (1)
AC plug holder (1)
Operating Instructions (1)
CD-ROM (1)
Warranty Card (1)
Using the CD-ROM Manual (1)
Optional accessories
Rack mount bracket for 14 type 
monitor MB-526
Rack mount bracket for 20 type 
monitor MB-527
SDI  input adaptor BKM-320D
Design and specifications are subject to change without 
notice.
 
						

							Specifications 28
Pin assignment
PARALLEL REMOTE terminal 
Modular connector
(8-pin)
You can allocate functions using the REMOTE 
PARALLEL menu (see page 25). 
Wiring required to use the Remote Control
Connect the function you want to use with a Remote 
Control to the Ground (Pin 5).
Video signal formats
The unit is applicable to the following signal formats.
When an optional input adaptor is installed, the unit is applicable to the following signal formats.
When BKM-320D is installed
18Pin number  Functions
1  Designating LINE A input signal
2  Designating LINE B input signal
3  Designate RGB/COMPONENT input signal
4 16:9
5 GND
6 4:3
7 Selecting under
8 Selecting normal
Input
System Total lines Active lines Frame rate Scanning format Aspect ratio Signal standard
575/50I (PAL) 625 575 25 2:1 interlace 16:9/4:3 EBU N10
(PAL: ITU-R BT.624)
480/60I (NTSC) 525 483 30 2:1 interlace 16:9/4:3 SMPTE 253M
(NTSC: SMPTE 170M)
Output
System Effective picture size Frame rate Scanning format
575/50I (PAL) 640 × 480 50 Progressive
480/60I (NTSC) 640 × 480 60 Progressive
Input
System Signal standard BKM-320D
575/50I ITU-R BT.656a
480/60I SMPTE 259Ma
 
						

							Dimensions29
Dimensions
LMD-1410/1420
Front
RearSide
Bottom
LINE A LINE B SDI SCAN ASPECTRESETMENU VOLUME POWER
KEY
INHIBIT
ENTER RGB/
COMPONENTEXT
SYNCBLUE
ONLY
343 (13 5/8)
138.1 (5 
1/2) 165.9 (6 
5/8)
213.8 (8 
1/2) 2.5 
(
1/8)
LINE A
LINE B PARALLEL REMOTE RGB/COMPONENTOPTION
AUDIO IN
OPTION IN
VIDEOIN OUTVIDEOIN OUTG/YIN OUTB/PBIN OUTEXT
SYNCIN OUTR/PRIN OUTAUDIOIN OUTAUDIOIN OUTAUDIOIN OUTAC IN
100 (4)
36 (1 
7/16)
100 (4)
76.2  
(3)
96.8 (3 
7/8)
67.7  
(2 3/4)
264.4 (10 1/2)
86.8 (3 1/2)
204.3 (8 1/8)
165.1 (6 
1/2)
216.3 (8 5/8)4-M5
76.2  
(3) 114.6 (4 
5/8)
Unit: mm (inches)
 
						

							Dimensions 30
LMD-2010/2020
Front
RearSide
Bottom
470 (18 5/8)
182.3 (7 
1/4) 211.7 (8 
3/8)
256.8 (10 
1/8) 2.5  
(
1/8)
LINE A LINE B SDI SCAN ASPECTRESETMENU VOLUME POWER
KEY
INHIBIT
ENTER RGB/
COMPONENTEXT
SYNCBLUE
ONLY
LINE A
LINE B PARALLEL REMOTE RGB/COMPONENTOPTION
AUDIO IN
OPTION INVIDEOIN OUTVIDEOIN OUTG/YIN OUTB/PBIN OUTEXT
SYNCIN OUTR/PRIN OUTAUD I OIN OUTAUD I OIN OUTAUD I OIN OUTAC IN
100 (4)
100 (4)
34.7 (1 
3/8)
87 (3 1/2)
96.8  
(3 
7/8)
67.7  
(2 3/4)
264.4 (10 1/2)
80.6  
(3 1/4)
204.3 (8 1/8)
165.1 (6 
1/2)
216.3 (8 5/8)4-M5
76.2  
(3) 114.6  
(4 
5/8)
Unit: mm (inches)