Sony Klv S19a10e Operating Instructions

32
Watching the TV
Button Descriptions
ButtonDescription
1MUTINGPress to mute the sound. Press again or press VOL + to restore 
the sound.
2DISPLAYPress once to display the current channel number, channel 
label, time and Wide Mode settings. The OSD (on screen 
display) will be canceled after a few seconds or press again to 
immediately cancel the display.
3POWER 
SAVINGPress repeatedly to cycle through the power saving modes: 
Standard, Reduced, Picture Off. See Powe r  S avi n g on 
page 61....

Watching the TV
33
Watching the TV
qdSOUNDPress repeatedly to cycle through the sound modes: Dynamic, 
Natural, Clear Voice. See “Selecting Audio Options” on 
page 49.
qfPICTUREPress repeatedly to cycle through the available video picture 
modes: Vivid, Standard, Pro. The video picture modes can be 
also accessed in the Video settings. See “Selecting Video 
Options” on page 48.
qgPOWERPress to turn on and off the TV.
qhMTS/SAPPress repeatedly to cycle through the Multi-channel TV Sound 
(MTS) options:...

Watching the TV
34
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Follow the steps below to program your TV’s remote control to operate the 
other video equipment.
Find the three-digit code for your equipment from the “Manufacturer’s 
Codes” listed on page 35. If more than one code number is listed, try 
entering from the code listed first.
1Press and hold the   or   FUNCTION button you want to 
program on the remote control and press the   button...

Watching the TV
35
Watching the TV
Manufacturer’s Codes
DVD Players
DVD Changers
DVD/VCR Combo Units
HDD/DVD Combo Units
5.1ch DVD AV System
AV Receivers
VCRs
ManufacturerCode
Sony 751
General Electric 755
Hitachi 758
JVC 756
Magnavox 757
Mitsubishi 761
Panasonic 753
Philips 757
Pioneer 752
RCA/PROSCAN 755
Samsung 758
To s h i b a 7 5 4
Zenith 760
ManufacturerCode
Sony 765
Panasonic 766
ManufacturerCode
Sony 767
Zenith 768
To s h i b a 7 7 3
Samsung 774
JVC 775
Broksonic 776
Panasonic 777...

Watching the TV
36
Using Other Equipment with Your Remote Control
To operate other connected equipment with your TV, first turn to page 35 
and program the necessary code. For operating video equipment, press 
TV/VIDEO repeatedly until you see the video input on the screen for your 
connected equipment. Remote control operation tips are provided below.
Operating a Cable Box
Operating a Satellite Receiver
Operating a VCR
Operating a DVD Player or DVD Changer
Some functions cannot be operated depending on...

Watching the TV
37
Watching the TV
Operating a 5.1ch DVD AV System (Sony DAV)
Operating a DVD/VCR Combo Unit
Operating a DVD/HDD Combo Unit
Operating an AV Receiver
To Do This ...Press ...To Do This ...Press ...
Activate the remote control to operate 
the DVDDVD/VCR (FUNCTION)PlayN
Stopx
Turn on/offPOWERPauseX
Select other equipment connected to 
the DAVF1Search the picture forward or backwardM or m during playback
Skip a diskF2Move highlight (cursor)V v B b
Display the top menuTOP M ENUSelect item...

Watching the TV
38
Special Buttons on the Remote Control
Using the Wide 
Screen Mode
Changing the wide screen mode
Wide Mode : 
Wide Zoom
Wide Mode : 
Normal
Wide Mode : 
Full
Wide Mode : 
ZoomWide Mode : 
Wide Zoom
Wide Mode : 
Full
Wide Mode : 
Zoom
WIDE
MODE
16:9 Original source
(High definition source) 4:3 Original source
(Standard definition source)
When the TV receives a 720p or 1080i signal, Normal cannot be 
selected.
4:3 Original source
Standard definition source16:9 Original source
High...

Watching the TV
39
Watching the TV
Using the Jump 
FunctionYou can change or jump between the last two channels.
Using the Freeze 
FunctionYou can use this feature to write down information such as phone numbers, 
recipes, etc. When you press the button once, the current screen is frozen 
and the sub screen appears. When you press the button twice, only the frozen 
screen is displayed; when you press it a third time, the normal screen returns.
To cancel the Freeze function mode
Press FREEZE until the...

Watching the TV
40
Using the Sleep 
FunctionYou can set the TV to turn off automatically after a predetermined period of 
time (15, 30, 45, 60, or 90 minutes). 
While the Sleep timer is activated, the TIMER LED on the TV lights up in 
red.
To cancel the Sleep timer
Press SLEEP repeatedly until Sleep Off appears or turn the TV power to off 
then turn on the TV again.
Sleep : 90Sleep : 60Sleep : 45Sleep : 30Sleep : 15Sleep : Off
SLEEP
zIf you turn the TV off, and 
then turn it on again, the 
Sleep timer...