Sony Klv S19a10e Operating Instructions

Connecting the TV
21
Connecting the TV
Notes on Using This Connection
To Do This ...Do This ...
Watch the HD equipment Press WEGA GATE to select the HD equipment input (Video 4) in the External 
Inputs list.
or
Press TV/VIDEO repeatedly to select the HD equipment input (Video 4).
Set up the remote control to 
operate the HD equipmentYou must program the remote control. See “Programming the Remote Control” on 
page 34.
Activate the remote control to 
operate the HD equipmentPress SAT/CABLE (FUNCTION)....

Connecting the TV
22
Connecting Optional Equipment
You can connect a variety of optional equipment to your TV. This section 
provides some of the individual connections you can make. For multiple 
connections, please refer to the Quick Setup Guide.
VCR, Cable and 
AntennaThis scenario shows a VCR with Cable signals connected through the video 
inputs and the Antenna connected through the VHF/UHF input. The Cable 
or VCR signals are selected by the VCR through the video inputs while TV 
signal (Antenna)...

Connecting the TV
23
Connecting the TV
Notes on Using This Connection
To Do This ...Do This ...
Watch the VCR Press WEGA GATE to select the VCR input (Video 1, 2 or 3) in the External Inputs 
list.
or
Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1, 2 or 3).
Watch cable channels Press WEGA GATE to select the VCR input (Video 1, 2 or 3) in the External Inputs 
list.
or
Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1, 2 or 3).
Set up the remote control to 
operate the VCR You must...

Connecting the TV
24
DVD Player For best results, use this connection if your DVD player has component 
video (YP
BPR) jacks.
To connect a DVD player with component video connectors
1Use a component video cable to connect the DVD player’s YPBPR 
output jacks to the TV’s YPBPR input jacks (HD/DVD IN 4).
2Use an audio cable to connect the DVD player’s AUDIO output jacks to 
the TV’s AUDIO input jacks (HD/DVD IN 4).
The YPBPR jacks on your DVD player are sometimes labeled Y, CB 
and C
R, or Y, B-Y and R-Y....

Connecting the TV
25
Connecting the TV
Notes on Using This Connection
To connect a DVD player with S VIDEO and audio connectors
If your DVD player does not have component video (YPBPR) jacks, or the 
component video inputs are already connected to another device, use this 
connection.
1Use an S VIDEO cable to connect the DVD player’s S VIDEO output 
jack to the TV’s S VIDEO input jack (VIDEO 1 or 3).
2Use an audio cable to connect the DVD player’s AUDIO output jacks to 
the TV’s AUDIO input jacks (VIDEO...

Connecting the TV
26
HDMI-Equipped 
DeviceTo connect a device with HDMI connector
Use an HDMI cable to connect the device’s HDMI output connector to the 
TV’s HDMI IN connector on the right side panel.
Notes on Using This Connection
HDMI cables transmit both audio and video signals. (Separate audio 
cables are not necessary.) You can purchase HDMI cables at your local 
electronics store.
Do not connect a PC to the TV’s HDMI input. Use the PC IN (RGB IN) 
connector instead when connecting a PC.
IN
AUDIO...

Connecting the TV
27
Connecting the TV
DVI-HDTV-Equipped 
DeviceTo connect a device with DVI-HDTV connector
If the device does not have an HDMI connector, you can connect the TV’s 
HDMI IN connector to the device’s DVI-HDTV output connector using a 
DVI to HDMI cable.
1Use a DVI to HDMI adapter or cable to connect the device’s DVI-
HDTV output connector to the TV’s HDMI IN connector on the right 
side panel.
2Use an Audio cable to connect the device’s AUDIO output jacks to the 
TV’s AUDIO input jacks on...

Connecting the TV
28
Personal ComputerTo connect a PC (personal computer)
If you connect your PC to the TV, you can watch your personal computer’s 
display on the TV.
When your PC is connected to the TV with the supplied HD15-HD15 cable 
and optional audio cable, you can view and listen to the PC’s video and 
audio output on the TV.
Notes on Using This Connection
zWhen connecting to an 
Apple Macintosh 
computer, use the 
supplied HD15-HD15 
cable to connect PC IN of 
the TV to video output 
connector of...

Connecting the TV
29
Connecting the TV
Camcorder or 
“PlayStation”For easy connection to a camcorder or “PlayStation”, the TV has left side 
A/V input jacks. If you prefer, you can connect the camcorder to the TV’s 
rear A/V input jacks.
To connect a camcorder or “PlayStation”
Use an A/V and S VIDEO cables to connect the camcorder or “PlayStation” 
AUDIO and S VIDEO output jacks to the TV’s AUDIO and S VIDEO input 
jacks (VIDEO 2) on the left side of panel.
Notes on Using This Connection
If your...

Connecting the TV
30
Setting Up the Channel List
After you finish connecting your TV, you need to run Initial Setup, which 
automatically sets up available channels. The Initial Setup screen appears 
when you turn on your TV for the first time after hooking it up. If you do not 
want to set up the channels at this time, you can do it later by selecting the 
Auto Program option in the Channel settings (see page 53).
Using Initial SetupTo run Initial Setup the first time you turn on your TV
1Press POWER to...