Sony Kdl 46z4500 Operating Instructions
Here you can view all the pages of manual Sony Kdl 46z4500 Operating Instructions. The Sony manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 51
51 GB Using MENU Functions Server Display SettingsDisplays the connected server list and allows you to select the server you want to display on the Home Menu. Server DiagnosticsDiagnoses whether the TV can connect to each server on the home network. Renderer FunctionEnables playback of photos or music on the TV through other control devices on the network, such as a digital still camera or mobile phone. Renderer Access ControlAllows you to specify the accessible controller to the TV. When this...
Page 52
52 GB Additional Information Installing the Accessories (Wall-Mount Bracket) To Customers: For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product. Your TV can be installed using the Wall-Mount Bracket SU-WL500 (sold separately)....
Page 53
53 GB Additional Information Unit: mm Figures in the above table may differ slightly depending on the installation. The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifications” (page 54) for its weight. * Hook position “a, c” cannot be used for the models in the table above. TV installation dimensions table Model NameDisplay dimensionsScreen centre dimensionLength for each mounting angle Angle (0°) Angle (20°) AB...
Page 54
54 GB Specifications Model nameKDL-52Z4500KDL-46Z4500KDL-40Z4500 System Panel system LCD (Liquid Crystal Display) Panel TV systemAnalogue: Depending on your country selection: B/G/H, D/K, L, I Digital: DVB-T/DVB-C Colour/video systemAnalogue: PAL, SECAM, NTSC 3.58/4.43 (only Video In) Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC [email protected], [email protected] Channel coverageAnalogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41 D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69 Digital: VHF/UHF Sound...
Page 55
55 GB Additional Information * Specified standby power is reached after the TV finishes necessary internal processes. PC Input Signal Reference Chart for PC This TV’s PC input does not support Sync on Green or Composite Sync. This TV’s PC input does not support interlaced signals. This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. PC Input Signal Reference Chart for HDMI IN 1, 2, 3 Mass (Approx.) with Table-Top Stand41.0 kg 34.5 kg 25.5 kg without Table-Top...
Page 56
56 GB Troubleshooting Check whether the 1 (standby) indicator is flashing in red. When it is flashing The self-diagnosis function is activated. 1Count how many 1 (standby) indicator flashes between each two second break. For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc. 2Press 1 on the top edge of the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of...
Page 57
57 GB Additional Information There is a significant difference in the output volume level between DIGITAL MEDIA PORT input and TV or other equipment input. Adjust “Volume Offset” setting in the “Sound” menu (page 40). Connection Diagnostic Results “Connection successful.”does not appear.Check Connections Use a straight cable for the LAN cable. Check if the cable is connected firmly. Check the connection between the TV and the broadband router. Check Settings Change the IP address for the DNS...
Page 58
58 GB The TV cannot be found from renderer-compatible equipment (the controller).Check Connections Check that the LAN cable and/or mains lead of the server has not become disconnected. Check Settings Check if the “Renderer Function” is activated (page 51). Check that the connected device is registered under “Renderer Access Control” (page 51). Channels The desired channel cannot be selected Switch between digital and analogue mode and select the desired digital/ analogue channel. Some channels...
Page 59
59 GB Additional Information The speaker grille has come off To attach the speaker grille, first turn off the TV, then unplug the mains lead. Then follow the procedure below. Orient the speaker grille so that the location of the marks on the speaker grille and TV match, insert the protrusions on the speaker grille into the holes on the TV, and support gently. Check that the speaker grille and TV are in contact without any gaps, and then secure it by pushing and sliding the speaker grille left into...