Sony Kdl 46z4500 Operating Instructions

41 GB
Using MENU Functions
~
 “Treble”, “Bass”, “Balance” and “Auto Volume” are not available when “Speaker” is set to “Audio System” 
and headphones are connected. Dual SoundSelects the sound from the speaker for a stereo or bilingual broadcast.
Stereo/MonoFor a stereo broadcast.
A/B/MonoFor a bilingual broadcast, select “A” for sound channel 1, “B” 
for sound channel 2, or “Mono” for a mono channel, if 
available.
z
 If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, 
“A”...

42 GB
MotionflowProvides smoother picture movement and reduces picture blur.
MaxProvides smoother picture movement such as for film-based 
contents.
StandardProvides smooth picture movement. Use this setting for 
standard use.
MinProvides smooth picture movement. Use this setting to 
reduce unwanted picture noise.
OffUse this setting when the “Max”, “Standard” and “Min” 
settings result in noise.
~
 Depending on the video, you may not see the effect visually, even if you have 
changed the setting.
Film...

43 GB
Using MENU Functions
Timer SettingsSets the timer to turn on/off the TV.
Sleep TimerSets a period of time after which the TV automatically 
switches itself into standby mode.
When the “Sleep Timer” is activated, the   (Timer) indicator 
on the TV (front) lights up in orange.
z
 If you switch off the TV and switch it on again, “Sleep 
Timer” is reset to “Off.”
 A notification message appears on the screen one minute 
before the TV switches to standby mode.
On Timer 
SettingsOn TimerSets the timer to...

44 GB
PC Settings Screen FormatSelects a screen format for displaying input from your PC.
Full 1Enlarges the picture to fill the vertical 
display area, keeping its original 
horizontal-to-vertical aspect ratio.
Full 2Enlarges the picture to fill the display 
area.
ResetResets the PC screen settings to the factory settings.
Auto AdjustmentAutomatically adjusts the display position, phase and pitch of 
the picture when the TV receives an input signal from the 
connected PC.
z
 “Auto Adjustment” may not...

45 GB
Using MENU Functions
AV2 InputSets a signal to be input through the socket labelled  /
/  AV2 on the rear of the TV.
AutoSwitches automatically among the signals 
of RGB input, S video input, Composite 
video input depending on the input 
signal.
RGBInputs the RGB signal.
S VideoInputs the S Video signal.
CompositeInputs the Composite video signal.
AV2 OutputSets a signal to be output through the socket labelled  /
/  AV2 on the rear of the TV. If you connect a 
VCR/ DVD recorder or other recording...

46 GB
HDMI Set-upThis is used to set the “Control for HDMI” compatible equipment connected to the 
HDMI sockets. Note that the interlock setting must also be made on the connected 
“Control for HDMI” compatible equipment side.
Control for HDMIThis sets whether to interlock the “Control for HDMI”  
compatible equipment and the TV. When set to “On”, the 
following menu items can be performed. However, power 
consumption in standby mode is higher than usual. If the 
specific Sony equipment that is...

47 GB
Using MENU Functions
Manual Programme 
PresetBefore selecting “Label/AFT/Audio Filter/LNA/Skip/Decoder”, press PROG +/– 
to select the programme number with the channel. You cannot select a programme 
number that is set to “Skip” (page 44).
System/ChannelPresets programme channels manually.
1Press F/f to select the programme number you want to 
manually tune (if tuning a VCR/ DVD recorder, select 
channel 00), then press  .
2Press F/f to select “System”, then press  .
3Press F/f to select one of...

48 GB
LNAImproves the picture quality for individual channels in the 
case of very weak broadcast signals (noisy picture).
If you cannot see any improvement in the picture quality even 
if you set to “On”, set this option to “Off” (factory setting).
SkipSkips unused analogue channels when you press PROG +/– 
to select channels. (You can still select a skipped channel 
using the number buttons.)
DecoderShows and records the scrambled channel selected when 
using a decoder connected directly to scart...

49 GB
Using MENU Functions
Subtitle Set-up Subtitle SettingWhen “For Hard Of Hearing” is selected, some visual aids 
may also be displayed with the subtitles (if TV channels 
broadcast such information).
Subtitle 
LanguageAllows you to select the language of the subtitles.
Audio Set-up Audio TypeSwitches to broadcast for the hearing impaired when “For 
Hard Of Hearing” is selected.
Audio LanguageSelects the language used for a programme. Some digital 
channels may broadcast several audio languages for a...

50 GB
System UpdateEnables the TV to automatically receive software updates 
free through your existing aerial/cable (when issued). We 
recommend that you leave the setting to “On” at all times.
~
 For the software upgrade to be able to take place the TV set should be left in 
stand-by mode from time to time.
System 
InformationDisplays the current software version and the signal level.
~
 If signal bar is red (no signal) or amber (low signal), check the aerial/cable 
connection.
Time ZoneAllows you to...