Home > Sony > Television > Sony Kdl 46z4500 Operating Instructions

Sony Kdl 46z4500 Operating Instructions

Here you can view all the pages of manual Sony Kdl 46z4500 Operating Instructions. The Sony manuals for Television are available online for free. You can easily download all the documents as PDF.

Page 51

51 GB
Using MENU Functions
Server Display 
SettingsDisplays the connected server list and allows you to select the server you want to 
display on the Home Menu.
Server DiagnosticsDiagnoses whether the TV can connect to each server on the home network.
Renderer FunctionEnables playback of photos or music on the TV through other control devices on 
the network, such as a digital still camera or mobile phone.
Renderer Access 
ControlAllows you to specify the accessible controller to the TV. When this...

Page 52

52 GB
Additional Information
Installing the Accessories (Wall-Mount Bracket)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be 
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this 
product.
Your TV can be installed using the Wall-Mount Bracket SU-WL500 (sold separately)....

Page 53

53 GB
Additional Information
Unit: mm
Figures in the above table may differ slightly depending on the installation.
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of 
the TV. Refer to “Specifications” (page 54) for its weight.
* Hook position “a, c” cannot be used for the models in the table above.
TV installation dimensions table
Model NameDisplay dimensionsScreen centre 
dimensionLength for each mounting angle
Angle (0°) Angle (20°)
AB...

Page 54

54 GB
Specifications
Model nameKDL-52Z4500KDL-46Z4500KDL-40Z4500
System
Panel system
LCD (Liquid Crystal Display) Panel
TV systemAnalogue: Depending on your country selection: B/G/H, D/K, L, I
Digital: DVB-T/DVB-C
Colour/video systemAnalogue: PAL, SECAM, NTSC 3.58/4.43 (only Video In)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC [email protected], [email protected]
Channel coverageAnalogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69
Digital: VHF/UHF
Sound...

Page 55

55 GB
Additional Information
* Specified standby power is reached after the TV finishes necessary internal processes.
PC Input Signal Reference Chart for  PC
 This TV’s PC input does not support Sync on Green or Composite Sync.
 This TV’s PC input does not support interlaced signals.
 This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency.
PC Input Signal Reference Chart for HDMI IN 1, 2, 3
Mass (Approx.)  with  Table-Top 
Stand41.0 kg 34.5 kg 25.5 kg
without Table-Top...

Page 56

56 GB
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When it is flashing
The self-diagnosis function is activated.
1Count how many 1 (standby) indicator flashes between each two second break.
For example, the indicator flashes three times, then there is a two second break, followed by 
another three flashes, etc.
2Press 1 on the top edge of the TV to turn it off, disconnect the mains lead, and inform your 
dealer or Sony service centre of how the indicator flashes (number of...

Page 57

57 GB
Additional Information
There is a significant 
difference in the output 
volume level between 
DIGITAL MEDIA PORT 
input and TV or other 
equipment input. Adjust “Volume Offset” setting in the “Sound” menu (page 40).
Connection Diagnostic Results
“Connection successful.”does 
not appear.Check Connections
 Use a straight cable for the LAN cable.
 Check if the cable is connected firmly.
 Check the connection between the TV and the broadband router.
Check Settings
 Change the IP address for the DNS...

Page 58

58 GB
The TV cannot be found from 
renderer-compatible 
equipment (the controller).Check Connections
 Check that the LAN cable and/or mains lead of the server has not 
become disconnected.
Check Settings
 Check if the “Renderer Function” is activated (page 51).
 Check that the connected device is registered under “Renderer Access 
Control” (page 51).
Channels
The desired channel cannot be 
selected Switch between digital and analogue mode and select the desired digital/
analogue channel.
Some channels...

Page 59

59 GB
Additional Information
The speaker grille has come 
off To attach the speaker grille, first turn off the TV, then unplug the mains 
lead. Then follow the procedure below.
Orient the speaker grille so that the location of the marks on the speaker 
grille and TV match, insert the protrusions on the speaker grille into the 
holes on the TV, and support gently. Check that the speaker grille and 
TV are in contact without any gaps, and then secure it by pushing and 
sliding the speaker grille left into...
Start reading Sony Kdl 46z4500 Operating Instructions

Related Manuals for Sony Kdl 46z4500 Operating Instructions

All Sony manuals