Sony Kdl 46nx713 Operating Instructions

							11GB
Watching TV
To use i-Manual
xWelcome to i-Manual
x“BRAVIA” TV Features
xWatching TV
Introduces convenient features such as EPG 
Guide, Favourites, etc.
xUsing the Home Menu
Customise your TV settings, etc.xFun Features with Connected 
Equipment
Introduces how to connect optional equipment.
xParts Description
xTroubleshooting
Find solutions for your problem.
xIndex
~
Images and illustrations may differ from what is displayed on the screen.
Operating instructions are built into your BRAVIA 
TV and can be displayed on the screen.
You can browse your i-Manual anytime you need 
to find the varieties of convenient functions.
1Press i-MANUAL.
2Press G/g/F/f/ to select items.
1
2
 
						

							12GB
Additional Information
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When the 1 (standby) indicator is flashing
The self-diagnosis function is activated. 
1Count how many times the 1 (standby) indicator flashes between each three second 
break.
For example, the indicator may flash three times, go off for three seconds, then flash again three 
times.
2Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform 
your dealer or Sony service centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing
1Check the items in the tables below. (Also refer to “Troubleshooting” in the i-Manual.)
2If the problem persists, have your TV serviced by qualified service personnel.
ConditionExplanation/Solution
Picture
There is no picture (screen 
is dark) and no sound.Check the antenna (aerial)/cable connection.
Connect the TV to the AC power (mains), and press 1 on the TV.
If the 1 (standby) indicator lights up in red, press TV "/1.
Tiny black points and/or 
bright points appear on the 
screen.The screen is composed of pixels. Tiny black points and/or bright 
points (pixels) on the screen do not indicate a malfunction.
General
The TV’s power cannot be 
turned on.Check if ENERGY SAVING SWITCH is on (z).
The TV turns off 
automatically (the TV 
enters standby mode).Check if the “Sleep Timer” is activated, or confirm the 
“Duration” setting of “On Timer”.
Check if the “Idle TV Standby” is activated.
The remote does not 
function.Replace the batteries.
Your TV may be in SYNC mode.
Press SYNC MENU, select “TV Control” and then select “Home 
(Menu)” or “Options” to control the TV.
The “Parental Lock” 
password has been 
forgotten.Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)
The TV surrounds become 
warm.When the TV is used for an extended period, the TV surrounds 
become warm.
You may feel hot when touching there by the hand.
 
						

							13GB
Additional Information
Specifications
System
Panel system
LCD (Liquid Crystal Display) Panel
TV systemAnalogue: Depending on your country/area selection: B/G/H, D/K, L, I
Digital: DVB-T2/DVB-T/DVB-C
Colour/video systemAnalogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Channel coverageAnalogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69
Digital: VHF/UHF
Sound outputKDL-52/40NX803, KDL-46/40NX703
10 W + 10 W
KDL-55NX813, KDL-46/40NX713
8 W + 8 W + 10 W
Input/Output jacks
Antenna (aerial) cable
75 ohm external terminal for VHF/UHF
/ AV121-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video 
output.
COMPONENT INSupported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
COMPONENT INAudio input (phono jacks)
HDMI IN1, 2, 3, 4Video: 
KDL-52/40NX803, KDL-46/40NX703
1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
KDL-55NX813, KDL-46/40NX713
1080/24p, 1080p, 1080i, 720/24p, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN2 only)
PC Input
AV2Video input (phono jack)
 DIGITAL AUDIO OUT 
(OPTICAL)Digital optical jack (Two channel linear PCM, Dolby Digital)
PC INPC Input (Mini D-sub 15-pin)
 PC audio input (minijack)
USB port
iHeadphones jack
CAM (Conditional Access Module) slot
LAN10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, 
connection speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality 
are not guaranteed for this TV.)
* For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).
3D SYNC (KDL-55NX813, 
KDL-46/40NX713 only)3D Sync terminal for optional transmitter
(Continued)
 
						

							14GB
0
*1Specified standby power is reached after the TV finishes necessary internal processes.
*24 hours a days and 365 days a year
Model name KDL-52NX80346NX70340NX80340NX703
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Screen size (measured 
diagonally)Approx. 132.2 cm/
52 inchesApprox. 116.8 cm/
46 inchesApprox. 101.6 cm/40 inches
Display resolution1,920 dots (horizontal) × 1,080 lines (vertical)
Power 
consumptionin “Home”/
“Standard” 
mode125 W 96.0 W 104 W 81.0 W
in “Shop”/
“Vivid” mode169 W 129 W 133 W 109 W
Standby power 
consumption*10.23 W (18 W when “Quick Start” is set to “On”) 0.2 W (18 W when “Quick Start” is set to “On”)
Average annual energy 
consumption*2183 kWh 140 kWh 152 kWh 118 kWh
Dimensions (Approx.) (w × h × d) 
with Table-Top Stand
126.1 × 81.9 × 40.0 cm 112.7 × 74.8 × 32.0 cm 99.4 × 66.9 × 29.0 cm 99.4 × 67.3 × 29.0 cm
without Table-Top Stand126.1 × 78.7 × 6.4 cm 112.7 × 71.6 × 6.4 cm 99.4 × 63.5 × 6.4 cm 99.4 × 64.1 × 6.4 cm
Mass (Approx.)
with Table-Top Stand
36.1 kg 27.8 kg 23.8 kg 22.6 kg
without Table-Top Stand30.1 kg 24.0 kg 20.1 kg 19.2 kg
Supplied accessoriesSee “Checking the accessories” (page 4).
Optional accessoriesWall-Mount Bracket: SU-WL700
Wall-Hanging Bracket: SU-WH500
TV stand: SU-52NX1 (KDL-52NX803)
SU-46NX1 (KDL-46NX703)
SU-40NX1 (KDL-40NX803/40NX703)
Model name KDL-55NX81346NX71340NX713
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Screen size (measured 
diagonally)Approx. 138.8cm/55 inches Approx.116.8 cm/46 inches Approx. 101.6 cm/40 inches
Display resolution1,920 dots (horizontal) × 1,080 lines (vertical)
Power 
consumptionin “Home”/
“Standard” 
mode118 W 107 W 97.0 W
in “Shop”/
“Vivid” mode180 W 158 W 142 W
Standby power consumption*10.2 W (18 W when “Quick Start” is set to “On”)
Average annual energy 
consumption*2172 kWh 156 kWh 142 kWh
Dimensions (Approx.) (w × h × d) 
with Table-Top Stand
127.6 × 80.0 × 32.3 cm 108.3 × 69.0 × 27.0 cm 94.4 × 61.2 × 24.5 cm
without Table-Top Stand127.6 × 77.0 × 3.2 cm 108.3 × 66.0 × 3.1 cm 94.4 × 58.2 × 3.2 cm
Mass (Approx.)
with Table-Top Stand
32.2 kg 24.4 kg 19.8 kg
without Table-Top Stand26.9 kg 20.5 kg 16.1 kg
Supplied accessoriesSee “Checking the accessories” (page 4).
Optional accessoriesWall-Mount Bracket: SU-WL700, SU-WL500
Wall-Hanging Bracket: SU-WH500
TV stand: SU-B550S (KDL-55NX813)
SU-B460S (KDL-46NX713)
SU-B400S (KDL-40NX713)
3D Glasses: TDG-BR100/TDG-BR50
3D Sync Transmitter: TMR-BR100
 
						

							15GB
Additional Information
~
To save power consumption
–when you reduce backlight setting (the brightness of the screen), the power consumption reduce.
–the “Eco” settings (e.g. “Power Saving”, “Idle TV Standby”) help you to reduce the power consumption and 
thus save money by reducing electricity bills.
–when you switch off the TV using the ENERGY SAVING SWITCH (only certain models), power 
consumption will be almost zero.
Design and specifications are subject to change without notice.
 
						

							16GB
Installing the Accessories (Wall-Mount/Wall-Hanging 
Bracket)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be 
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this 
product.
Your TV can be installed using the SU-WL500 (KDL-55NX813, KDL-46/40NX713 only)/SU-
WL700 Wall-Mount Bracket or SU-WH500 Wall-Hanging Bracket (sold separately).
 Refer to the Instructions supplied with the Wall-Mount Bracket or Wall-Hanging Bracket to 
properly carry out the installation.
 Refer to “Detaching the Table-Top Stand from the TV” (in this manual).
Be sure to remove the joint when the Table-Top Stand is not attached to the TV. (KDL-
55NX813, KDL-46/40NX713 only)
SU-WL500 (KDL-55NX813, KDL-46/40NX713 only)
~
Attach the Mounting Hook using four +PSW6 × 16 screws supplied with the Wall-Mount Bracket.
Sufficient expertise is required for installing this product, especially to determine the strength of 
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the 
wall to Sony dealers or licensed contractors and pay adequate attention to safety during the 
installation. Sony is not liable for any damage or injury caused by mishandling or improper 
installation.
Mounting Hook
Screw (+PSW6 × 16)
Soft cloth
 
						

							17GB
Additional Information
TV installation dimensions table (SU-WL500)
Unit: cm
Figures in the above table may differ slightly depending on the installation.
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of 
the TV. Refer to “Specifications” (page 14) for its weight.
Screw and Hook locations diagram/table (SU-WL500)
Model Name
KDL-Display 
dimensionsScreen centre 
dimensionLength for each mounting angle
Angle (0°)Angle (20°)
AB CDEFGH
55NX813127.6 77.0 8.6 48.2 9.2 31.8 72.3 49.5
46NX713108.3 66.0 14.1 48.2 9.1 28.0 62.0 49.5
40NX71394.4 58.2 17.8 48.2 9.1 25.2 54.7 49.5
Model Name KDL-Screw locationHook location
55NX813
e, j b 46NX713
40NX713
Screen centre point
WARNING
Screw location
When installing the Mounting Hook on the TV.Hook location
When installing the TV onto the Base Bracket.
b a*
c*
* Hook location “a” and “c” 
cannot be used for the models.
(Continued)
 
						

							18GB
SU-WL700
~
Remove the bottom cover and terminal cover 
when installing on a wall (KDL-52/40NX803 
only).
Be sure to use the black spacers supplied with the 
TV when installing on a wall (KDL-52/40NX803 
only).
Be sure to install the Wall-Mount Bracket securely 
to the wall following the instructions in this as well 
as the manual provided with the Wall-Mount 
Bracket. The numbers given in the parentheses 
indicate the installation steps described in the 
instruction manual provided with Wall-Mount 
Bracket.
1Check the parts supplied with the Wall-
Mount Bracket (1).
Refer to the instruction manual provided 
with the Wall-Mount Bracket.
2Decide on the installation location. 
(2-1)
Refer to the following “TV installation 
dimensions table”. Allow for suitable 
clearance between the TV, the ceiling and 
protruding parts of the wall as instructed.
3Install the Base Bracket on the wall. 
(2-2 through 3)
Decide the positions of the screw on the 
wall and install the Base Bracket. Refer to 
the instruction manual provided with the 
Wall-Mount Bracket for details.
4Detach the Table-Top Stand from the 
TV, if necessary. (4-1)
See “Detaching the Table-Top Stand 
from the TV” (in this manual) for details.
5Connect the supplied AC power cord 
(mains lead). (5-1) (KDL-52/
40NX803, KDL-40/46NX703 only)
~
Do not attach the bottom cover.
6Place the spacers (KDL-52/40NX803 
only).
~
When attaching the Table-Top Stand again, be 
sure to fasten the four screws (previously 
removed) to the original holes on the rear of 
the TV.
7Attach the Mounting Bracket and the 
Lock Bracket. (4-3 through 4-7)
Refer to the instruction manual provided 
with the Wall-Mount Bracket.
8Prepare the paper template. (5-2)
1. Refer to the following “TV installation 
dimensions table” and mark the TV outline 
on the template.
2. Tape the template to the wall as 
instructed in the manual provided with the 
Wall-Mount Bracket.
Follow the instruction manual provided 
with the Wall-Mount Bracket to complete 
the installation. (5-3 through 6)
Precautions
1Remove the four screws, and be 
sure to store them in a safe place, 
keeping them away from children.
2Place the four 
spacers (supplied).
 
						

							19GB
Additional Information
TV installation dimensions table (SU-WL700)
Unit: cm
Figures in the above table may differ slightly depending on the installation.
The wall that the TV will be installed on should be capable of supporting a weight of at least four 
times that of the TV. Refer to “Specifications” (page 14) for its weight.
Model Name 
KDL-Display 
dimensionsScreen centre 
dimensionLength for each mounting angle
Angle (0°)Angle (20°)
AB CDEFGH
55NX813
127.6 77.0 1.7 41.3 5.2 36.3 72.3 47.1
52NX803126.1 78.7 1.3 42.1 7.5 38.9 74.5 48.8
46NX713108.3 66.0 7.2 41.3 5.1 32.5 62.0 47.1
46NX703112.7 71.6 5.2 42.7 7.5 36.2 67.9 49.3
40NX80399.4 63.5 8.9 42.1 7.5 33.7 60.2 48.8
40NX71394.4 58.2 10.9 41.3 5.1 29.9 54.7 47.1
40NX70399.4 64.1 8.9 42.7 7.5 33.7 60.8 49.3
Screen centre point
WARNING
(Continued)
 
						

							20GB
SU-WH500
Refer to the Instructions supplied with the SU-WH500 Wall-Hanging Bracket to properly carry out 
the installation.
For KDL-55NX813 and KDL-46/40NX713 only
~
With the screen of the TV facing down, attach the SU-WH500 accessories.
It is unnecessary to attach the Cushions supplied with SU-WH500. (3-1 in “Installation” of SU-WH500 
Instructions)
Attach the Pulleys to the upper two screw holes (see illustration above) using M6 ×16 screws supplied with 
SU-WH500. (3-3 in “Installation” of SU-WH500 Instructions)
Pulley Screw (M6 × 16)
Soft cloth