Sony Kdl 46nx713 Operating Instructions

							4-180-179-16(1)
LCD 
Digital Colour TV
Operating Instructions
Setting Up
Watching TV
Additional Information
KDL-55NX813 / 52NX803 / 46NX713 / 46NX703 / 40NX803 / 40NX713 / 40NX703
 
						

							2GB
NOTICE FOR 
CUSTOMERS IN 
THE UNITED 
KINGDOM
A moulded plug complying with BS1363 is 
fitted to this equipment for your safety and 
convenience.
Should the fuse in the plug supplied need to 
be replaced with the same rating of fuse 
approved by ASTA or BSI to BS 1362 (i.e., 
marked with   or  ) must be used.
When an alternative type of plug is used it 
should be fitted with the same rating of 
fuse, otherwise the circuit should be 
protected by a 10 AMP FUSE at the 
distribution board.
If the plug supplied with this equipment has 
a detachable fuse cover, be sure to attach 
the fuse cover after you change the fuse. 
Never use the plug without the fuse cover. 
If you should lose the fuse cover, please 
contact your nearest Sony service station.
How to replace the fuseOpen the fuse compartment with a blade 
screwdriver, and replace the fuse.
Please refer to the illustration that actually 
equipped with the product.
Introduction
Thank you for choosing this Sony product. 
Before operating the TV, please read this 
manual thoroughly and retain it for future 
reference.
Notes on Digital TV 
function
•Any functions related to Digital TV 
( ) will only work in countries or 
areas where DVB-T (MPEG-2 and 
H.264/MPEG-4 AVC) digital terrestrial 
signals are broadcast or where you have 
access to a compatible DVB-C (MPEG-
2 and H.264/MPEG-4 AVC) cable 
service. Please confirm with your local 
dealer if you can receive a DVB-T signal 
where you live or ask your cable 
provider if their DVB-C cable service is 
suitable for integrated operation with 
this TV.
Your cable provider may charge a fee for 
their services, or require you to agree to 
its terms and conditions of business.
This TV set complies with DVB-T and 
DVB-C specifications, but compatibility 
with future DVB-T digital terrestrial and 
DVB-C digital cable broadcasts are not 
guaranteed.
Some Digital TV functions may not be 
available in some countries/areas and 
DVB-C cable may not operate correctly 
with some providers.
For a list of compatible cable providers, 
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/
~
Instructions about “Installing Wall 
Mount Bracket” are included within this 
TV’s instructions manual.
The illustrations used in this manual are 
of the KDL-40NX803 series unless 
otherwise state.
The illustrations of the remote used in 
this manual are of the RM-ED030 unless 
otherwise stated.
Trademark information
 is a registered trademark of the DVB 
Project.
HDMI, the HDMI Logo, and High-
Definition Multimedia Interface are 
trademarks or registered trademarks of 
HDMI Licensing LLC in the United States 
and other countries.
DLNA
®, the DLNA Logo and DLNA 
CERTIFIED® are trademarks, service 
marks, or certification marks of the Digital 
Living Network Alliance.
DivX
® is a video file compression 
technology, developed by DivX, Inc.
DivX
®, DivX Certified® and associated 
logos are registered trademarks of DivX, 
Inc. and are used under license.
ABOUT DIVX VIDEO: DivX
® is a 
digital video format created by DivX,Inc.
This is an official DivX Certified device 
that plays DivX video. Visit 
www.divx.com for more information and 
software tools to convert your files into 
DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: 
This DivX Certified
® device must be 
registered in order to play DivX Video-on-
Demand (VOD) content. To generate the 
registration code, locate the DivX VOD 
section in the device setup menu. Go to 
vod.divx.com with this code to complete 
the registration process and learn more 
about DivX VOD.Manufactured under license from Dolby 
Laboratories. Dolby and the double-D 
symbol are trademarks of Dolby 
Laboratories.
“BRAVIA” and   are 
trademarks of Sony Corporation.
“XMB” and “xross media bar” are 
trademarks of Sony Corporation and Sony 
Computer Entertainment Inc.
Notice for Wireless 
Signal
1. Hereby, Sony, declares that this unit is 
in compliance with the essential 
requirements and other relevant provisions 
of Directive 1999/5/EC.
To obtain the declaration of conformity 
(DoC) for R&TTE Directive, please access 
the following URL address.
http://www.compliance.sony.de/
2. Notice for customers: the following 
information is only applicable to 
equipment sold in countries applying EU 
directives.
TV wireless system may be operated in 
following countries:
Austria, Belgium, Bulgaria, Cyprus, Czech 
Republic, Denmark, Estonia, Finland, 
France, Germany, Greece, Hungary, 
Iceland, Ireland, Italy, Latvia, 
Liechtenstein, Lithuania, Luxembourg, 
Malta, The Netherlands, Norway, Poland, 
Portugal, Slovak Republic, Romania, 
Slovenia, Spain, Sweden, Switzerland, 
Turkey, and The United Kingdom.
This equipment can be operated in other 
non-European countries.
Location of the 
identification label
Labels for Model No. and Power Supply 
rating (in accordance with applicable 
safety regulation) are located on the rear of 
the TV. For KDL-NX803 series models, 
they can be found by removing the bottom 
cover. The manufacturer of this product is 
Sony Corporation, 1-7-1 Konan 
Minato-ku Tokyo, 108-0075 Japan. 
The Authorized Representative for 
EMC and product safety is Sony 
Deutschland GmbH, Hedelfinger 
Strasse 61, 70327 Stuttgart, 
Germany. For any service or 
guarantee matters please refer to the 
addresses given in separate service 
or guarantee documents.
FUSE
FUSE
 
						

							3GB
Table of Contents
Checking the accessories .............................................................................................................. 4
Inserting batteries into the remote ................................................................................................. 4
Setting Up
Attaching the Table-Top Stand ...................................................................................................... 5
Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder) .................................. 7
Preventing the TV from toppling over ............................................................................................8
Bundling the cables........................................................................................................................ 8
Performing the initial set-up ........................................................................................................... 9
Detaching the Table-Top Stand from the TV ................................................................................. 9
Watching TV
To watch programmes ................................................................................................................. 10
To utilise the TV’s features .......................................................................................................... 10
To use i-Manual ........................................................................................................................... 11
Additional Information
Troubleshooting ........................................................................................................................... 12
Specifications ............................................................................................................................... 13
Installing the Accessories (Wall-Mount/Wall-Hanging Bracket) ................................................... 16
Safety Information ........................................................................................................................ 22
Precautions .................................................................................................................................. 23
Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation (page 11).
Before operating the TV, please read “Safety Information” (page 22). Retain this manual for future reference.
 
						

							4GB
Checking the accessories
For all models
Remote (1)
Size AAA batteries (R3 type) (2)
Table-Top Stand (1)*
For KDL-52/40NX803, KDL-46/
40NX703 models
AC power cord (mains lead) (1)
Cable holder (1)
Stand rear cover (1)
Black spacers (4)
 (KDL-52/40NX803 only)
Fixing screws for Table-Top Stand 
(M5 × 16) (4)
Assembling screws for Table-Top Stand 
(M5 × 16) (4)
 (KDL-40NX803 and KDL-
40NX703 only)
For KDL-55NX813, KDL-46/40NX713 
models
Hexagon wrench (1)
Assembling screws for Table-Top Stand 
(4)
 (KDL-55NX813, KDL-46NX713 only)
Assembling screws for Table-Top Stand 
(2)
 (KDL-40NX713 only)
SCART Adaptor (1)
* Disassembled except for KDL-52NX803 and 
KDL-46NX703.
Refer to the supplied Table-Top Stand leaflet to 
assemble the stand.
Inserting batteries into the 
remote
1Remove the protection sheet.
2Push and slide the cover upward.
 
						

							5GB
Setting Up
Setting Up
Attaching the Table-Top 
Stand
Refer to the supplied Table-Top Stand leaflet 
for proper attachment for some TV models.
~
For best picture quality, do not expose the screen 
to direct illumination or sunlight.
If the TV is brought directly from a cold to a warm 
location, or is placed in a very damp room, or is 
placed in a room in which heating has just been 
turned on, moisture may condense on the surface 
or inside the TV. Should this occur, turn off the 
TV and leave the TV off until the moisture 
evaporates, and then the TV can be used. If you 
notice moisture condensation between the glass 
panel and the LCD, turn on the TV and the 
condensation will evaporate after the TV has 
warmed up.
For KDL-52/40NX803, KDL-46/
40NX703
1Place the TV set on the Table-Top 
Stand.
2Fix the TV to the Table-Top Stand 
according to the arrow marks   that 
guide the screw holes using the 
supplied screws.
~
If using an electric screwdriver, set the tightening 
torque at approximately 1.5 N·m {15 kgf·cm}.
3After all the screws are tightened, 
attach the supplied stand rear cover to 
the Table-Top Stand.
For KDL-55NX813, KDL-46/40NX713
1Align with the two dowels of the Table-
Top Stand, and gently place the TV, 
checking the f mark is facing the front.
2Attach the TV and Table-Top Stand 
with the supplied screw and hexagon 
wrench.
~
Set the torque setting to approximately 3 N·m {30 
kgf·cm}.
Reattaching the Table-Top Stand to the 
TV
Attach to the original position using the 
removed screws. See “Detaching the Table-
Top Stand form the TV” (page 9).
(Continued)
 
						

							6GB
Adjusting the viewing angle of 
the TV 
This TV can be adjusted within the angles 
shown below.
~
To return to 0°, reverse the below procedure.
For KDL-52/40NX803, KDL-46/
40NX703For KDL-55NX813, KDL-46/40NX713
14
23
Remove screw as 
shown.6º 0º
Install screw into 
the top screw hole 
of the Table-Top 
Stand.
Slide in. Lift up and tilt.
6º 0º
 
						

							7GB
Setting Up
Connecting an antenna 
(aerial)/Set Top Box/
recorder (e.g. DVD recorder)
Connecting a Set Top Box/recorder 
(e.g. DVD recorder) with SCART
For KDL-52/40NX803, KDL-46/40NX703
~
Right Angle Type Universal SCART Lead is 
recommended for this connection.
For KDL-55NX813, KDL-46/40NX713
Connecting a Set Top Box/recorder 
(e.g. DVD recorder) with HDMI
~
For KDL-52/40NX803, after connecting cables, 
install the bottom cover and stand rear cover.
Set Top Box/recorder (e.g. DVD recorder)
Set Top Box/recorder (e.g. DVD recorder)SCART adaptor 
(supplied)
Set Top Box/recorder (e.g. DVD recorder)
 
						

							8GB
Preventing the TV from 
toppling over
1Install a wood screw (4 mm in 
diameter, not supplied) in the TV stand.
2Install a machine screw (not supplied) 
into the screw hole of the TV.
For KDL-52/40NX803, KDL-46/
40NX703 
Use M4 × 16 screw
For KDL-55NX813, KDL-46/
40NX713
Use M4 × 8 screw
3Tie the wood screw and the machine 
screw with a strong cord (not supplied).
Bundling the cables
~
Do not bundle the AC power cord (mains lead) 
together with other cables.
For KDL-52/40NX803, KDL-46/
40NX703
For KDL-55NX813, KDL-46/40NX713
*
*KDL-52/40NX803 only
 
						

							9GB
Setting Up
Performing the initial set-up
1Connect the TV to your AC power 
outlet (mains socket).
2Check the ENERGY SAVING 
SWITCH setting is on (
z).
3Press 1 on the TV.
When you switch on the TV for the first 
time, the Language menu appears on the 
screen.
Follow the instructions on the screen.
Digital Auto Tuning: When you select 
“Cable”, we recommend that you select 
“Quick Scan” for quick tuning. Set 
“Frequency” and “Network ID” according 
to the information supplied from your cable 
provider. If no channel is found using 
“Quick Scan”, try “Full Scan” (though it 
may take some time).
For a list of compatible cable providers, 
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/Programme Sorting: Changes the order of 
analogue channels stored in the TV.
1Press F/f to select the channel you want 
to move to a new position, then press  .
2Press F/f to select the new position for 
the channel, then press  .
~
You can also tune channels manually.
Detaching the Table-Top 
Stand from the TV
~
Remove the screws guided by the arrow marks   
of the TV.
Do not remove the Table-Top Stand for any 
reason other than to install corresponding 
accessories on the TV.
Be sure the TV is on the vertical position before 
switching on. TV set must not powered on with 
LCD panel face down to avoid uneven picture 
uniformity.
For KDL-52/40NX803, KDL-46/
40NX703
For KDL-55NX813, KDL-46/40NX713
4
KDL-46/
40NX703 KDL-52/
40NX803 KDL-55NX813, 
KDL-46/40NX713
Joint
 
						

							10GB
Watching TV
To watch programmes
To utilise the TV’s features
HOME button
Press to display various operation and setting 
screens.OPTIONS button
Press to display convenient functions based on 
the current input or content.
z
The number 5, N, PROG + and AUDIO 
buttons on the remote have a tactile dot. 
Use the tactile dots as a reference when 
operating the TV.
1Turn on the TV.
1Switch ENERGY SAVING SWITCH 
on (
z).
2Press 1 on the TV to turn on the TV.
2Select a mode.
3Select a TV channel.
Using Digital Electronic Programme 
Guide
Press GUIDE in digital mode to display the 
programme guide.
GUIDE
OPTIONS
HOME
2
3
Settings
TVSystem Settings
Picture
Sound
BRAVIA ENGINE 3 PRO
Add to Favourites
Lock/Unlock
PAP
Motionflow
Sleep Timer
Headphone Volume
Speaker
System Information