Home > Sony > Television > Sony Kdl 46nx713 Operating Instructions

Sony Kdl 46nx713 Operating Instructions

Here you can view all the pages of manual Sony Kdl 46nx713 Operating Instructions. The Sony manuals for Television are available online for free. You can easily download all the documents as PDF.

Page 1

4-180-179-16(1)
LCD 
Digital Colour TV
Operating Instructions
Setting Up
Watching TV
Additional Information
KDL-55NX813 / 52NX803 / 46NX713 / 46NX703 / 40NX803 / 40NX713 / 40NX703
 

Page 2

2GB
NOTICE FOR 
CUSTOMERS IN 
THE UNITED 
KINGDOM
A moulded plug complying with BS1363 is 
fitted to this equipment for your safety and 
convenience.
Should the fuse in the plug supplied need to 
be replaced with the same rating of fuse 
approved by ASTA or BSI to BS 1362 (i.e., 
marked with   or  ) must be used.
When an alternative type of plug is used it 
should be fitted with the same rating of 
fuse, otherwise the circuit should be 
protected by a 10 AMP FUSE at the 
distribution board.
If the plug...

Page 3

3GB
Table of Contents
Checking the accessories .............................................................................................................. 4
Inserting batteries into the remote ................................................................................................. 4
Setting Up
Attaching the Table-Top Stand ...................................................................................................... 5
Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD...

Page 4

4GB
Checking the accessories
For all models
Remote (1)
Size AAA batteries (R3 type) (2)
Table-Top Stand (1)*
For KDL-52/40NX803, KDL-46/
40NX703 models
AC power cord (mains lead) (1)
Cable holder (1)
Stand rear cover (1)
Black spacers (4)
 (KDL-52/40NX803 only)
Fixing screws for Table-Top Stand 
(M5 × 16) (4)
Assembling screws for Table-Top Stand 
(M5 × 16) (4)
 (KDL-40NX803 and KDL-
40NX703 only)
For KDL-55NX813, KDL-46/40NX713 
models
Hexagon wrench (1)
Assembling screws for Table-Top Stand 
(4)...

Page 5

5GB
Setting Up
Setting Up
Attaching the Table-Top 
Stand
Refer to the supplied Table-Top Stand leaflet 
for proper attachment for some TV models.
~
For best picture quality, do not expose the screen 
to direct illumination or sunlight.
If the TV is brought directly from a cold to a warm 
location, or is placed in a very damp room, or is 
placed in a room in which heating has just been 
turned on, moisture may condense on the surface 
or inside the TV. Should this occur, turn off the 
TV and leave the TV...

Page 6

6GB
Adjusting the viewing angle of 
the TV 
This TV can be adjusted within the angles 
shown below.
~
To return to 0°, reverse the below procedure.
For KDL-52/40NX803, KDL-46/
40NX703For KDL-55NX813, KDL-46/40NX713
14
23
Remove screw as 
shown.6º 0º
Install screw into 
the top screw hole 
of the Table-Top 
Stand.
Slide in. Lift up and tilt.
6º 0º
 

Page 7

7GB
Setting Up
Connecting an antenna 
(aerial)/Set Top Box/
recorder (e.g. DVD recorder)
Connecting a Set Top Box/recorder 
(e.g. DVD recorder) with SCART
For KDL-52/40NX803, KDL-46/40NX703
~
Right Angle Type Universal SCART Lead is 
recommended for this connection.
For KDL-55NX813, KDL-46/40NX713
Connecting a Set Top Box/recorder 
(e.g. DVD recorder) with HDMI
~
For KDL-52/40NX803, after connecting cables, 
install the bottom cover and stand rear cover.
Set Top Box/recorder (e.g. DVD recorder)
Set Top...

Page 8

8GB
Preventing the TV from 
toppling over
1Install a wood screw (4 mm in 
diameter, not supplied) in the TV stand.
2Install a machine screw (not supplied) 
into the screw hole of the TV.
For KDL-52/40NX803, KDL-46/
40NX703 
Use M4 × 16 screw
For KDL-55NX813, KDL-46/
40NX713
Use M4 × 8 screw
3Tie the wood screw and the machine 
screw with a strong cord (not supplied).
Bundling the cables
~
Do not bundle the AC power cord (mains lead) 
together with other cables.
For KDL-52/40NX803, KDL-46/
40NX703
For...

Page 9

9GB
Setting Up
Performing the initial set-up
1Connect the TV to your AC power 
outlet (mains socket).
2Check the ENERGY SAVING 
SWITCH setting is on (
z).
3Press 1 on the TV.
When you switch on the TV for the first 
time, the Language menu appears on the 
screen.
Follow the instructions on the screen.
Digital Auto Tuning: When you select 
“Cable”, we recommend that you select 
“Quick Scan” for quick tuning. Set 
“Frequency” and “Network ID” according 
to the information supplied from your cable...

Page 10

10GB
Watching TV
To watch programmes
To utilise the TV’s features
HOME button
Press to display various operation and setting 
screens.OPTIONS button
Press to display convenient functions based on 
the current input or content.
z
The number 5, N, PROG + and AUDIO 
buttons on the remote have a tactile dot. 
Use the tactile dots as a reference when 
operating the TV.
1Turn on the TV.
1Switch ENERGY SAVING SWITCH 
on (
z).
2Press 1 on the TV to turn on the TV.
2Select a mode.
3Select a TV channel.
Using...
Start reading Sony Kdl 46nx713 Operating Instructions

Related Manuals for Sony Kdl 46nx713 Operating Instructions

All Sony manuals