Sony Kdl 46nx713 Operating Instructions
Here you can view all the pages of manual Sony Kdl 46nx713 Operating Instructions. The Sony manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 1
4-180-179-16(1) LCD Digital Colour TV Operating Instructions Setting Up Watching TV Additional Information KDL-55NX813 / 52NX803 / 46NX713 / 46NX703 / 40NX803 / 40NX713 / 40NX703
Page 2
2GB NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug...
Page 3
3GB Table of Contents Checking the accessories .............................................................................................................. 4 Inserting batteries into the remote ................................................................................................. 4 Setting Up Attaching the Table-Top Stand ...................................................................................................... 5 Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD...
Page 4
4GB Checking the accessories For all models Remote (1) Size AAA batteries (R3 type) (2) Table-Top Stand (1)* For KDL-52/40NX803, KDL-46/ 40NX703 models AC power cord (mains lead) (1) Cable holder (1) Stand rear cover (1) Black spacers (4) (KDL-52/40NX803 only) Fixing screws for Table-Top Stand (M5 × 16) (4) Assembling screws for Table-Top Stand (M5 × 16) (4) (KDL-40NX803 and KDL- 40NX703 only) For KDL-55NX813, KDL-46/40NX713 models Hexagon wrench (1) Assembling screws for Table-Top Stand (4)...
Page 5
5GB Setting Up Setting Up Attaching the Table-Top Stand Refer to the supplied Table-Top Stand leaflet for proper attachment for some TV models. ~ For best picture quality, do not expose the screen to direct illumination or sunlight. If the TV is brought directly from a cold to a warm location, or is placed in a very damp room, or is placed in a room in which heating has just been turned on, moisture may condense on the surface or inside the TV. Should this occur, turn off the TV and leave the TV...
Page 6
6GB Adjusting the viewing angle of the TV This TV can be adjusted within the angles shown below. ~ To return to 0°, reverse the below procedure. For KDL-52/40NX803, KDL-46/ 40NX703For KDL-55NX813, KDL-46/40NX713 14 23 Remove screw as shown.6º 0º Install screw into the top screw hole of the Table-Top Stand. Slide in. Lift up and tilt. 6º 0º
Page 7
7GB Setting Up Connecting an antenna (aerial)/Set Top Box/ recorder (e.g. DVD recorder) Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART For KDL-52/40NX803, KDL-46/40NX703 ~ Right Angle Type Universal SCART Lead is recommended for this connection. For KDL-55NX813, KDL-46/40NX713 Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI ~ For KDL-52/40NX803, after connecting cables, install the bottom cover and stand rear cover. Set Top Box/recorder (e.g. DVD recorder) Set Top...
Page 8
8GB Preventing the TV from toppling over 1Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2Install a machine screw (not supplied) into the screw hole of the TV. For KDL-52/40NX803, KDL-46/ 40NX703 Use M4 × 16 screw For KDL-55NX813, KDL-46/ 40NX713 Use M4 × 8 screw 3Tie the wood screw and the machine screw with a strong cord (not supplied). Bundling the cables ~ Do not bundle the AC power cord (mains lead) together with other cables. For KDL-52/40NX803, KDL-46/ 40NX703 For...
Page 9
9GB Setting Up Performing the initial set-up 1Connect the TV to your AC power outlet (mains socket). 2Check the ENERGY SAVING SWITCH setting is on ( z). 3Press 1 on the TV. When you switch on the TV for the first time, the Language menu appears on the screen. Follow the instructions on the screen. Digital Auto Tuning: When you select “Cable”, we recommend that you select “Quick Scan” for quick tuning. Set “Frequency” and “Network ID” according to the information supplied from your cable...
Page 10
10GB Watching TV To watch programmes To utilise the TV’s features HOME button Press to display various operation and setting screens.OPTIONS button Press to display convenient functions based on the current input or content. z The number 5, N, PROG + and AUDIO buttons on the remote have a tactile dot. Use the tactile dots as a reference when operating the TV. 1Turn on the TV. 1Switch ENERGY SAVING SWITCH on ( z). 2Press 1 on the TV to turn on the TV. 2Select a mode. 3Select a TV channel. Using...