Sony Ht Ct500 Operating Instructions

41US
Getting Started
[Tone]
You can adjust the bass and treble level easily. 
For details, see “Adjusting the bass and treble 
level” (page 58).
[Audio]
You can adjust or operate useful functions 
related to audio. For details, see “Adjusting the 
delay between the sound and the image” 
(page 79), “Enjoying multiplex broadcast 
sound” (page 80), “Reassigning the audio input” 
(page 81), or “Enjoying the sound at low 
volume” (page 59).
[Video]
You can adjust the resolution. For details, see 
“Converting...

42US
4Press X/x repeatedly to select the menu 
item you want to adjust.
5Press   to enter the menu item.
6Press X/x repeatedly to select the 
parameter you want to adjust.
7Press  or c to enter the parameter.
8Press X/x repeatedly to select the 
setting you want.
9Press   to enter the setting.
10Repeat steps 2 to 9 to make other 
settings.
To return to the previous screen
Press RETURN/EXIT.
To display or erase the guide 
menu
Press DISPLAY.
To exit the GUI menu
Press GUI MENU.
 

43US
Getting StartedGUI Menu List
You can set the following items with GUI MENU on the remote.
InputTV
BD
DVD
SAT/CATV
VIDEO 1
VIDEO 2
FMAuto Tuning
Direct TuningOption*FM Mode
Memory
Name Input
VideoiPod Option*System GUI
Adapter GUI
iPod
MusiciPod
Bluetooth
Network Client
Walkman
Option*System GUI
Adapter GUI
iPod
Mobile Phone
AMAuto Tuning
Direct TuningOption*Memory
Name Input
VIDEO 3
continued
 

44US
* This item appears when you press TOOLS/OPTIONS in each menu.
SettingsLevelCenter Level
Subwoofer Level
D.Range Comp
SurroundSound Field Setup
AudioA/V Sync
Dual Mono
Audio Assign
Night Mode
S-AIRS-AIR ID
S-AIR Mode
RF Change
S-AIR Standby
Pairing
ToneBass Level
Treble Level
VideoResolution
HDMIControl for HDMI
Volume Limit
HDMI Pass Through
Video Direct
SystemDimmer
Display
 

45US
Getting Started
To connect the DIGITAL MEDIA PORT adapter
You can enjoy picture and sound from a component connected to the subwoofer using the DIGITAL 
MEDIA PORT adapter.
 Do not connect or disconnect the DIGITAL MEDIA PORT adapter while the system is turned on.
 When you connect the DIGITAL MEDIA PORT adapter, be sure the connector is inserted with the arrow mark 
facing toward the arrow mark on the DMPORT jack. To detach the DIGITAL MEDIA PORT adapter, press and 
hold 
A and then pull out the...

46US
To use the wireless system
The system is compatible with the S-AIR function, which allows sound transmission between the 
subwoofer and an S-AIR product (not supplied). When you purchase an S-AIR product, you need to 
establish sound transmission.
For details, see page 85.
CAUTION
 There is no need to open the slot cover until an S-AIR product is used.
EZW-T100 ANTENNA
HDMI
SPEAKERTV OUTSAT/CATV INDV D  I N
CENTER ONLY FOR SS-CT500
ASSIGNABLE
AUD I O I NL
R
AUD I O I NVIDEO IN COMPONENT VIDEO INRLY...

47US
Playback Options
For more information, see the pages indicated in parentheses.
Subwoofer
A?/1 (on/standby)
Press to turn the system on or off.
BINPUT SELECTOR
Press to select the input source to play back.
Every time you press the button, the input 
source changes cyclically as follows: TV t 
BD t DVD t SAT/CATV t VIDEO 1 
t VIDEO 2 t VIDEO 3 t FM t AM 
t DMPORT t TV……
CVOLUME +/–
Press to adjust the volume level.
Speaker
DRemote sensor 
Point the remote here.
EFront panel display
Check the system...

48US
Front panel display (subwoofer)
APOWER / ACTIVE STANDBY indicator
Lights as follows:
Green: the system is turned on.
No light: the system is turned off.
Amber: the system is turned off, and either [HDMI Pass Through] in the [HDMI] menu is set to 
[ON] or  [AUTO], or [S-AIR Standby] in the [S-AIR] menu is set to [ON].
BAudio decoding indicators
Lights up according to the audio input signals.
CSLEEP (96)
Flashes when the Sleep Timer function is active.
DTUNED (68)
Lights up when a radio station is...

49US
Playback Options
Remote control
This section describes subwoofer and speaker 
button operation. See page 72 for details on the 
button operation of connected components.
 Point the remote towards the remote sensor ( ) of the 
subwoofer or the speaker.
* The 5, N, and TV CH CHANNEL + buttons have 
a tactile dot. Use it as a guide during operation.
A?/1 (on/standby)
Press to turn the system on or off.
BInput buttons
Press one of the buttons to select the 
component you want to use. 
The buttons are...

50US
1Turn on the TV and choose a program. 
For details, refer to the operating 
instructions of the TV.
2Turn the system on.
3Press TV (white) on the remote.
4Adjust the volume of the system.
 When you connect a Sony TV, the audio input of the 
TV is switched and the image from the TV tuner is 
displayed on the TV screen automatically by pressing 
the TV (white) button. To change this setting, see 
“Changing the input button assignments of the 
remote” (page 75).
 The sound may be output from the TV’s...