Sony Ht Ct500 Operating Instructions

HT-CT500
Home Theatre System
4-143-833-11(1)
©2009 Sony Corporation
Operating Instructions
Mode d’emploi
Manual de instrucciones
ES
FR
GBUS
 

2US
3
To reduce the risk of fire or electric 
shock, do not expose this apparatus to 
rain or moisture.
Do not expose batteries or apparatus with battery-
installed to excessive heat such as sunshine, fire or the 
like.
Do not install the appliance in a confined space, such as 
a bookcase or built-in cabinet.
To reduce the risk of fire, do not cover the ventilation 
opening of the apparatus with newspapers, tablecloths, 
curtains, etc.
Do not place the naked flame sources such as lighted 
candles on the...

3US
8) Do not install near any heat sources such as 
radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two 
blades with one wider than the other. A grounding 
type plug has two blades and a third grounding 
prong. The wide blade or the third prong are 
provided for your safety. If the provided plug does 
not fit into your outlet, consult an electrician for...

4US
likely when using an indoor antenna. Therefore, we 
recommend using an outdoor antenna.)
 Use caution when placing the system on surfaces that 
have been specially treated (with wax, oil, polish, etc.) 
as staining or discoloration of the surface may result.
On operation
Before connecting other components, be sure to turn off 
and unplug the system.
If you encounter color irregularity on 
a nearby TV screen
The system is magnetically shielded to allow it to be 
installed near a TV set. However, color...

5US
The system is compatible with the S-AIR function, 
which allows transmission of sound between S-AIR 
products wirelessly.
S-AIR receivers can be used with the system. You can 
enjoy system sound in another room.
S-AIR products can be purchased as options (the S-AIR 
product lineup differs depending on the area).
Notes or instructions for the S-AIR receiver in these 
Operating Instructions refer only to when the S-AIR 
receiver is used.
For details on the S-AIR function, see “Using an S-AIR 
product”...

6US
Precautions ...............................................3
About the S-AIR function ........................5
Getting Started
Unpacking ................................................8
Step 1: Positioning the system ...............10
Warning about installing the system’s 
speaker to the TV stand or a wall ....12
Step 2: Connecting the speaker ..............25
Step 3a: Connecting the components with 
HDMI jacks .....................................27
Step 3b: Connecting the components 
without HDMI...

7US
Changing the display setting ..................84
(Display)
Using an S-AIR product.........................85
Settings and adjustments using the system 
menu ................................................95
Using the sleep timer .............................96
(SLEEP)
Additional Information
Troubleshooting .....................................97
Specifications .......................................100
Glossary ...............................................102
Overview of the menus...

8US
Getting Started
Unpacking
 Subwoofer (SA-WCT500) (1)
 Speaker (SS-CT500) (1)
 AM loop antenna (aerial) (1)
 FM wire antenna (aerial) (1)
 Speaker cord (1)
 Digital optical cord for a TV 
(2.5 m) (1) Remote commander (RM-
ANP037) (1)
 R6 (size AA) batteries (2)
 WS-CT500EB
 Clamper (1) Screws for the extension bracket 
(large, +PSW5 × 12 mm) (7)
 Screws for the rear cover (small, 
M3 × 8 mm) (4)
 Support belt (1)
 Screw for the support belt 
(+PSW4 × 20 mm) (1)
 Wood screw for the support belt 
(M3.8...

9US
Getting Started
Inserting batteries into the remote
Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the 
markings inside the compartment. To use the remote, point it at the remote sensor   on the speaker or 
in the front panel display of the subwoofer.
 Do not leave the remote in an extremely hot or humid place. 
 Do not use a new battery with an old one.
 Do not drop any foreign object into the remote casing, particularly when replacing the batteries....

10US
The illustrations below are examples of how to install the subwoofer and speaker. You can install the 
speaker on the TV stand or hang the speaker on a wall.
 Do not block the heat ventilation on the rear panel of the subwoofer.
 Do not cover the grill of the subwoofer.
Step 1: Positioning the system
Notes
Install the speaker on a rack.For details, see “Installing the speaker on 
the TV stand” (page 15).
For details, see “Installing the speaker on 
a wall” (page 24).For details, see “Hanging the...