Sony DPP FP97 User Manual

21 GB
Direct printing
Editing an image
1From the   Edit menu (page 18), 
press g/G to select   (Enlarge) to 
enlarge an image or   (Reduce) 
to reduce it, and then press ENTER.
Each time you press the button, the image 
becomes larger or smaller. You can also 
use the   (zoom in) and   (zoom out) 
buttons to enlarge or reduce the image 
size:
 : up to 200%
 : down to 60%
2Press PRINT.
Note
The picture quality of an enlarged image may 
deteriorate depending on its size.
1From the   Edit menu (page 18),...

22 GB
1From the   Edit menu (page 18), 
press g/G to select   (Adjust) and 
then press ENTER.
The Adjust menu is displayed.
2Press f/F to select the desired 
adjustment tool and press ENTER.
The adjustment screen of the selected tool 
appears.
Press g/G to adjust an image while 
checking the level.
The image before adjustment is displayed 
on the left half of the screen, and the 
adjusted image is displayed on the right.
Brightness: Press G to brighten the 
picture or g to darken it.
Tint: Press G to...

23 GB
Direct printing
Fish-eye: Makes the image look like a 
photo taken with a fish-eye lens.
3Press ENTER.
The filter takes effect.
When you have selected “Cross Filter,” 
“Painting,” or “Single Color,” the setting 
window is displayed. Move to the next 
step.
4Set the level and range.
x Cross Filter
1Select “Level” with f/F and press 
ENTER, adjust the level with f/F, and 
then press ENTER.
The higher the level you set, the more 
light sources become sparkling.
2Select “Length” with f/F and press...

24 GB
When pressing AUTO TOUCH-UP cannot 
reduce the red-eye phenomenon of a subject 
shot by flash, you can adjust the image 
manually.
Notes
 If you perform additional editing, such as 
enlarging, reducing the image size, rotating or 
moving an image, after the red-eye correction, the 
red-eye correction may not take effect. Perform the 
red-eye correction after these editorial operations.
 If a subject face is small, the red-eye correction 
may not work.
1From the   Edit menu (page 18), 
press g/G to...

25 GB
Direct printing
1Press PRINT.
The print quantity indication is displayed.
2Set the print quantity.
 To increase the print quantity one by 
one, press f repeatedly.
 To reduce the print quantity one by one, 
press F briefly repeatedly.
 To reset the print quantity to 1, press F 
for more than two seconds.
3Press PRINT.
1Select   (Save) and then press 
ENTER.
The dialog box used to specify the 
destination folder is displayed.
2Select the destination where you 
want to save the image.
Press f/F to...

26 GB
Performing 
“CreativePrint”
Using the CreativePrint menu
To undo the operation midway
Press CANCEL The window of the previous step is 
displayed. Depending on the step, you may not be 
able to undo the operation.
To exit the CreativePrint menu
 Press MENU in the middle of the operations 
and select “CreativePrint Complete.” 
Then press ENTER.
 In the image preview view, press 
g/G/f/F 
to select   and press ENTER.
The dialog box for saving an image may be 
displayed (page 25).
Tips
 You can press...

27 GB
Direct printing
1Press g/G/f/F to select an image area, 
then press ENTER.
The index view is displayed.
2Press g/G/f/F to select the desired 
image, then press ENTER.
The window used for adjusting the 
image is displayed.
5Adjust the image size, position or 
others of the selected image. 
Press g/G to select the desired adjustment 
item, then press ENTER.
6Press g/G to select   and press 
ENTER.
The selected image is added to the image 
area.
 To add an image to another image area, 
repeat steps 4...

D:\Printer\DPP-FP97 series 2008\IM\4129103112DPPFP97IM_GB\4129103113\4129103113DPPFP97IM_GB\050C03.fmMaster: Left
DPP-FP97 4-129-103- 11 (3)
28 GB
x Superimposing a stamp
1Press g/G /f /F  to select   (Stamp) 
and then press ENTER.
The window used for selecting a stamp 
is displayed.
2Press g/ G /f /F  to select the desired 
stamp and then press ENTER.
The selected stamp is displayed in the 
center of the preview screen. 
3Press g/ G /f /F  to adjust the position of 
the stamp.
4Press  / on the printer...

29 GB
Direct printing
 To utilize the history
Press g/G/f/F to select [F] or [f]   
and then press ENTER to display and 
utilize the characters you have input in 
the past (history).
 To change the font
Press 
g/G/f/F to select [Font] and 
then press ENTER. Each time you press 
ENTER, the font changes. You can use 
only one font for a sequence of 
characters input.
4When you finish entering characters, 
press 
g/G/f/F to select  and 
then press ENTER. 
The color selection window is 
displayed. 
5Press...

30 GB
5Set the calendar.
1Press g/G/f/F to select the calendar 
area and press ENTER.
The calendar setting window is 
displayed.
2Press f/F to select the item that you 
want to set, and then press ENTER.
Item Settings/Procedures
Start Y/MSet the first month and the 
year starting the calendar. 
Press 
g/G to select the 
month or year and press 
f/F to set the number. 
Press ENTER.
Start DaySet the day of the week 
(placed furthest left in the 
calendar). Press f/F to 
select “Sunday” or 
“Monday.” Then...