Sony DPP FP70 User Manual

							11 GB
Making various printing
Making easy printing
(Index/DPOF/All)
The Easy Printing menu  allows you to
print multiple images stored on a memory
card or an external device at one time.  
The printer provides the following three
easy printing methods:
•Index printing
You can print a list (index) of all the
images contained in a memory card or
an external device, which allows you to
check the contents of the selected media
easily.
The number of split panes on a sheet
will be calculated automatically.  Images
are printed with their corresponding
image numbers (folder number-file
number).
              Image numbers
       Date (If Date Print
        is on.)
•DPOF preset image printing
The images which are DPOF (Digital
Print Order Format) preset for printing
are displayed with the print mark (
)
in an image preview. You can print
those images at one time. The images
are printed with the preset number of
copies in the order they were displayed.
•All images printing
You can print all the images stored in a
memory card or an external device at
one time.
Notes
•For how to preset images for printing, see the
manual of your digital camera.
•Some types of digital cameras do not support
the DPOF function, or the printer may not
support some of the functions of the digital
camera.
Buttons to be used in easy printing
g/G/f/F/ENTER
CANCEL
MENU
1Press MENU on the printer.
The menu bar is displayed.
            Easy Printing icon           Menu bar
To exit the menu mode
Press MENU again.  The previous
window is displayed.
2Press g/G to select  (Easy
Printing) and then press ENTER.
The Easy Printing menu is displayed.
                        Easy Printing menu
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							12 GB
Editing an image
Displaying the Edit menu
You can display the Edit menu and edit or
add an effect to an image. You can print or
save an image being previewed.
Buttons to be used in the Edit menu
g/G/f/F/ENTER
PRINT
CANCEL
MENU
1Display the image that you want
to edit.
Display the image in the image
preview window or move the Cursor
to the desired image in the image list.
2Press MENU on the printer.
The menu bar is displayed.
          Edit menu icon        Menu bar
To exit the menu mode
Press MENU again.  The previous
window is displayed.
3Press g/G to select  (Edit) and
then press ENTER.
The Edit menu is displayed.
3Press f/F to select “Index Print”,
“DPOF Print”, or “Print All” and
then press ENTER.
The confirmation dialog box is
displayed.
Note
If there are no DPOF preset images when
you selected “DPOF Print,” an error
message will be displayed.
4Press g/G to select “Yes” to start
printing or “No” to cancel
printing, and then press ENTER.
When you select “Yes,” printing
starts. During printing, the PRINT
indicator flashes and the printing
process is displayed.
To stop printing
Press CANCEL.  When you are
printing multiple copies, the next
printing after the one currently
printing  will be canceled.
When printing is completed, the print
paper automatically emerges on the
paper tray.
5Remove the print paper from the
paper tray.
Tips
•Even if the remaining volume of the ink
ribbon is shorter than the print quantity, you
can proceed with printing.  If the ink ribbon
runs out in the middle of printing and a
message appears, follow the displayed
instructions to replace the ink ribbon (see
“Read This First”).
•When the “Date Print” item of the Print setup
menu is set to “On”, the date the image was
shot or saved is printed (page 32).
Downloaded From ManualsPrinter.com Manuals 
						

							13 GB
Making various printing
                  Cursor                    Edit menu
Items      Procedures
/Increases or reduces the
size of an image by
pressing the buttons on the
printer.
Moves an image.
Rotates an image.
Adjusts the picture quality
of an image.
Adds an filter to an image.
Reduces the red-eye
phenomenon.
Undoes the editing just
done and resets the image
to the status before editing.
Saves the edited image.
Exits the Edit menu.
Tip
You can set part of the Print setup menu items
from MENU while editing an image.
Enlarging and reducing an
image size
1Display the Edit menu (page 12).
2Press  (zoom in) to enlarge an
image or 
 (zoom out) to reduce
the size of it.
Each time you press the button, the
image becomes larger or smaller:
 :  up to 200%
 :  up to 60%
Note
The picture quality of an enlarged image may be
deteriorated depending on its size.
Moving an image
1Display the Edit menu (page 12).
2Press g/G to select  (Move) and
then press ENTER.
The g/G/f/F appears on the left/
right/above/down the image and
you can move the image.
3Move the image with g/G/f/F.
The image moves to the selected
direction.
4Press ENTER.
The image is fixed to the position.
Tip
To print the image previewed, press PRINT
(page 17).
Downloaded From ManualsPrinter.com Manuals 
						

							14 GB
Rotating an image 
1Display the Edit menu (page 12).
2Press g/G to select  (Rotate)
and then press ENTER.
The Rotate menu is displayed.
                       Rotate icon         Rotate menu
3Press f/F to select the direction
to rotate the image and then
press ENTER.
•Rotate 90 Clockwise:  Each time you
press ENTER, the image rotates 90°
clockwise.
•Rotate 90 Counterclockwise:
Each time you press ENTER, the
image rotates 90° counterclockwise.
Tip
To print the image previewed, press PRINT
(page 17).
Adjusting an image
1Display the Edit menu (page 12).
2Press g/G to select  (Adjust)
and then press ENTER.
The Adjust menu is displayed.
                               Adjust icon      Adjust menu
3Press f/F to select the desired
adjustment tool and press ENTER.
The adjustment slider appears.
          When “Brightness” is selected.
                            Adjustment slider
4Move the slider to the desired
position to adjust the level.
•Brightness: Press G to brighten the
picture or g to darken it.
•Tint: Press G to make the picture
bluish or g to make it reddish.
•Saturation: Press G to deepen the
colors or g to lighten the colors.
•Sharpness:  Press G to sharpen the
outlines or g to soften them.
5Press ENTER.
The adjustment takes effect.  The Edit
menu appears again.
Tip
To print the image previewed, press PRINT
(page 17).
Downloaded From ManualsPrinter.com Manuals 
						

							15 GB
Making various printing
Adding a special filter to an
image
1Display the Edit menu (page 12).
2Press g/G to select  (Filter) and
then press ENTER.
The Filter menu is displayed.
              Filter menu         Filter icon
         
3Press f/F to select the desired
filter you want to add to the
image.
•No Filter: No special filter on the
image (default setting).
•Cross Filter: Adds a cross, starburst
effect to the light source to print an
image with sparkling impression.
•Partial Color: Makes the
surroundings of the subject in
monochrome to emphasize the
subject in the center.
•Sepia: Changes the image like an
old photograph with faded colors.
•Monochrome: Changes the image
into a black and white picture.
•Paint: Makes the image look like a
painted picture.
•Fish-eye: Makes the image look like
a photo taken with a fish-eye lens.
4Press ENTER.
The filter takes effect.When you have selected “Cross
Filter”, the setting window is
displayed.
5Set the level and range for Cross
Filter.
1Select “Level” with f/F and press
ENTER, adjust level of retouch with
f/F, then press ENTER.
The higher the level you set, the
more light sources become
sparkling.
2Select “Length” with f/F and
press ENTER, adjust length of light
with  f/F, then press ENTER.
3Press f/F to select 
. Then
press ENTER.
Tip
To print the image previewed, press PRINT
(page 17).
Downloaded From ManualsPrinter.com Manuals 
						

							16 GB
The frame is fixed in the current
position.
To change the size of the
adjustment frame
Press g/G to select 
 (Enlarge) or
 (Reduce) and press ENTER.
Each time you press ENTER, the
frame becomes larger or smaller.
You can also enlarge or reduce the
size by pressing  
 (zoom in) or  
(zoom out) buttons on the printer.
Tip
Make the size of the adjustment frame two
to seven times as large as the eye size.
4Press g/G to select  and press
ENTER.
The range of red-eye correction is
enlarged.
5Press ENTER.
The adjustment takes effect.
The Red-eye correction menu is
displayed.
To make a red-eye correction for other
eyes, repeat steps 3 to 5.
6Press g/G to select  and press
ENTER.
The Edit menu is displayed again.
To reset the adjustment
Press CANCEL in step 5 instead of
ENTER.  The red-eye correction is
canceled and the window of step 2 is
displayed.
Tip
To print the image previewed, press PRINT
(page 17).
Correcting the red-eye
phenomenon
When pressing AUTO TOUCH-UP cannot
reduce the red-eye phenomenon of a
subject shot by flash, you can adjust it
manually.
Note
If you perform additional editing, such as
enlarging, reducing the image size, rotating or
moving an image, after the red-eye correction,
the red-eye correction may not take effect.
Perform the red-eye correction after these
editorial operations.
1Display the Edit menu (page 12).
2Press g/G to select  (Red-eye
correction)  and then press ENTER.
The adjustment frame appears on the
image, which indicates the range for
red-eye correction.
                Adjustment frame
3Adjust the position and size of the
adjustment frame.
Make the red-eye correction for the
right and left eyes separately.
To move the adjustment frame
1Press g/G to select  (Move) and
press ENTER.
2Move the frame with g/G/f/F.
The frame moves in the selected
direction.
3Press ENTER.
Downloaded From ManualsPrinter.com Manuals 
						

							17 GB
Making various printing
Printing an edited image
1Press PRINT.
The dialog box to specify the print
quantity is displayed.
2Press f/F to increase or decrease
the print quantity.
•To increase the print quantity one
by one, press f repeatedly.
•To reduce the print quantity one by
one, press F briefly repeatedly.
•To reset the print quantity to 1,
press F for more than two seconds. 
3Press PRINT to start printing.
The image previewed is printed.
Saving an edited image
When you select  (Save) in the Edit or
Creative Print menu, the dialog box to
select the destination to save the image is
displayed. You can save the image under a
new image number. 
Tip
The selected image will not be overwritten.
1Select the destination to save an
image.
Press f/F to select “Memory Stick”,
“SD Card”,  “CompactFlash“, or
“External Device“, and press ENTER.
Tip
When you select “External Device”, a
dialog box for selecting a drive may be
displayed. Follow the instructions on the
screen to select the destination drive.
The dialog box for setting date is
displayed. You can save the set date
with the image.
2Set date.
Press f/F to select the number and
press g/G to select the day, month or
year.  Then press ENTER.
The edited image by the Edit or
Creative Print menu is saved as a new
image.  The dialog box to notify the
new image number (folder number-
file number) is displayed.
3Press ENTER.
Note
While saving the image, do not turn off the
printer or remove a memory card or an external
device from the printer.  The printer, memory
card, USB card, or external device may be
damaged or the data may be lost.
Downloaded From ManualsPrinter.com Manuals 
						

							18 GB
         Creative Print menu icon     Menu bar
To exit the menu mode
Press MENU again.  The previous
window is displayed.
2Press g/G to select  (Creative
Print) and then press ENTER.
The Creative Print  menu is displayed.
To undo the operation midway
Press CANCEL.  The window of the
previous step is displayed.  Depending on
the step, you cannot undo the operation.
Tip
You can press MENU while making a Creative
Print and set part of the Print setup menu items.
To exit the Creative Print menu
•Press MENU in the middle of the
operations and select “Creative Print
Complete”.
•Display the preview image and then
press g/G/f/F to select 
 and press
ENTER.
The dialog box for saving an image may
be displayed (page 17).
Making a Creative
Print
With images saved in a memory card or an
external device, you can make the
following prints:
Menu You can make...
Layout Print A print with 2/4/9/13/16
split images.
Calendar Calendars with your
favorite images.
ID Photo An ID photo by specifying
vertical and horizontal
sizes for an image.
Superimpose A print with superimposed
message, handwrite
characters or illustrations.
Displaying the Creative Print
menu
Buttons to be used in Creative Print
g/G/f/F/ENTER
PRINT
CANCEL
MENU
1Press MENU.
The menu bar is displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							19 GB
Making various printing
4Press g/G/f/F to select the
desired image area and press
ENTER.
The window for selecting an image is
displayed.
5Press g/G/f/F to select the
desired image, and then press
ENTER.
The window used for adjusting the
image position is displayed.
                                       Adjustment tools
6Adjust the size and position of the
selected image.
Press g/G to select the desired
adjustment item, then press ENTER.
 Items    Procedures
/Increases or reduces the size of
an image by pressing the
buttons on the printer.
Move the image with g/G/
f/F, and then press ENTER.
Each time you press ENTER,
the image rotates 90°
clockwise.
AUTO TOUCH-UP
Automatically adjusts a failed
photo having problems such as
backlit, out-of-focus, or red-
eye phenomenon, by pressing
the button on the printer.
Continued
Making layout prints
You can make a print
with 2-split, 4-split, 9-
split, 13-split, or 16-
split images.
1Display the Creative Print menu
(page 18).
2Press g/G/f/F to select “Layout
Print”, then press ENTER.
The Layout Print templates are
displayed.
3Press g/G/f/F to select the
desired template, then press
ENTER.
The preview of the selected template
is displayed.
                        Image area
Tip
You can select and set each area in any
order.
Downloaded From ManualsPrinter.com Manuals 
						

							20 GB
                  Image area         Calendar area
Tip
You can select and set an image area or
calendar area in any order.
4Select an image.
When you select a template with
multiple images, repeat the
procedures below to select an image
for each area.
1Press g/G/f/F to select an image
area, then press ENTER.
The image list is displayed.
2Press g/G/f/F to select the
desired image, then press ENTER.
The window used for adjusting the
image angle and position is
displayed. For information on
adjustment, see step 6 on page 19.
3Press g/G to select 
 and then
press ENTER.
The image is selected and displayed
in the relevant  area.
5Set the calendar.
1Press  g/G/f/F to select the
calendar area and press ENTER to
display the calendar setting
window.
7Press g/G to select   and press
ENTER.
The selected image is added to the
image area. When you select a
template with multiple images, repeat
the steps 4 through 7 to select an
image for each area.
Tip
To save or print the layout images previewed,
see page 17.
Making a calendar
You can make calendars
with your favorite
images.
1Display the Creative Print menu
(page 18).
2Press g/G/f/F to select
“Calendar”, then press ENTER.
The window used for selecting the
calendar 
template, is displayed.
3Press g/G/f/F to select the desired
template, and then press ENTER.
The preview of the selected template
is displayed.
Downloaded From ManualsPrinter.com Manuals