Sony DPP FP50 User Manual

							31 GB
Making various printing  (MONITOR OUT mode)
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
Making various printing (MONITOR OUT mode)
Editing an image
Displaying the Edit menu
You can display the Edit menu on the TV
monitor and edit or add an effect to an
image.
Buttons to be used in the Edit menu
MENU
g/G/f/F/ENTER
CANCEL
PRINT
EDIT
PRINT
g/G/f/F/ENTER
CANCEL
1Display the image that you want
to edit.
Select the image in the image list or
press  PICTURE to display its preview
image.
2Press MENU on the printer or EDIT
on the remote commander.
The menu bar is displayed.  When
you press EDIT, the Edit menu on the
step 3 is displayed.
          Edit menu icon       Menu bar
To exit the menu mode
Press MENU again.  The previous
window is displayed.
3Press g/G to select  (Edit) and
then press ENTER.
The Edit menu is displayed.
                                       Cursor      Edit menu
Items      Procedures
/Increases or reduces the
size of an image or item.
Moves an image or item.
Rotates an image or item.
Adjusts the picture quality
of an image.
Adds an filter to an image.
Corrects the red-eye
phenomenon.
Superimposes characters
on an image.
Reset Resets the editing.
Save Saves the edited image.
Exit Exits the Edit menu.
Tip
You can press MENU while editing an image
and set part of the Set Up menu items.
001GBFP5007TV2-UC/CED.p65 3/11/05, 4:22 PM31
Downloaded From ManualsPrinter.com Manuals 
						

							32 GB
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
Enlarging and reducing an
image size
1Display the Edit menu (page 31).
2Press g/G/f/F to select  to
enlarge an image or 
 to reduce
the size of it and then press
ENTER.
Each time you press ENTER, the
image becomes larger or smaller:
 :  up to 200%
 :  up to 60%
Note
The picture quality of an enlarged image may be
deteriorated depending on its size.
Moving an image
1Display the Edit menu (page 31).
2Press g/G/f/F to select 
(Position) and then press ENTER.
The image frames become yellow and
you can move an image.
3Move the image with g/G/f/F.
The image moves to the selected
direction.
4Press ENTER.
The image is fixed to the position.
Rotating an image 
1Display the Edit menu (page 31).
2Press g/G/f/F to select 
(Rotate) and then press ENTER.
The Rotate menu is displayed.
               Rotate menu               Rotate tool
3Press f/F to select the direction to
rotate the image and then press
ENTER.
•Rotate 90° Clockwise:  Each time
you press ENTER, the image rotates
90° clockwise.
•Rotate 90° Counterclockwise:
Each time you press ENTER, the
image rotates 90° counterclockwise.
001GBFP5007TV2-UC/CED.p65 3/11/05, 4:22 PM32
Downloaded From ManualsPrinter.com Manuals 
						

							33 GB
Making various printing  (MONITOR OUT mode)
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
Adjusting an image
1Display the Edit menu (page 31).
2Press g/G/f/F to select 
(Adjust)  and then press ENTER.
The Adjust menu is displayed.
         Adjust menu              Adjustment tool
3Press f/F to select the desired
adjustment tool and press ENTER.
The adjustment slider appears.
          When “Brightness” is selected.
                                               Adjustment slider
4Move the slider to the desired
position to adjust the level.
•Brightness: Press f to brighten the
picture or F to darken it.
•Tint: Press f to make the picture
bluish or F to make it reddish.
•Saturation: Press f to deepen the
colors or F to lighten the colors.•Sharpness:  Press f to sharpen the
outlines or F to reset them.
5Press ENTER.
The adjustment takes effect.
To reset the adjustment
Press g/G/f/F to select “Reset” and
then press ENTER. The image resets to the
status before the adjustment is added.
Adding a special filter to an
image
1Display the Edit menu (page 31).
2Press g/G/f/F to select  (Filter)
and then press ENTER.
The Filter menu is displayed.
         Filter menu                              Filter tool
3Press f/F to select the desired
filter you want to add to the
image.
•Sepia: Changes the image like an
old photograph with faded colors.
•Monochrome: Changes the image
into a monochrome picture.
•Paint: Makes the image look like a
painted picture.
•Fish-eye: Makes the image look like
a photo taken with a fish-eye lens.
•Clear Filter: Removes the filter from
the image.
Continued
001GBFP5007TV2-UC/CED.p65 3/11/05, 4:22 PM33
Downloaded From ManualsPrinter.com Manuals 
						

							34 GB
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
4Press ENTER.
The filter takes effect.
Reducing the red-eye
phenomenon
You can reduce the red-eye phenomenon
of a subject shot using a flash.
Note
If you perform editions such as enlarging,
reducing the size of, rotating or moving an
image after the red-eye reduction
adjustment, the red-eye reduction may not
take effect.  Perform the red-eye reduction
after these editorial operations.
1Display the Edit menu (page 31).
2Press g/G/f/F to select  (Red-
eye reduction)  and then press
ENTER.
The adjustment frame appears on the
image, which indicates the range for
red-eye reduction adjustment.
         Adjustment frame
3Adjust the position and size of the
adjustment frame.
Make the red-eye reduction
adjustment for the right and left eyes
separately.
To move the adjustment frame
1Press g/G/f/F to select 
(Position) and press ENTER.
2Move the frame with g/G/f/F.
The frame moves in the selected
direction.
3Press ENTER.
The frame is fixed in the current
position.
To adjust the size of the adjustment
frame
Press g/G/f/F to select 
(Enlarge) or   (Reduce) and press
ENTER.
Each time you press ENTER, the
frame becomes larger or smaller.
Tip
Make the size of the adjustment frame two
to seven times as large as the eye size.
4Press g/G/f/F to select “Execute”
and press ENTER.
The range of red-eye reduction
adjustment is enlarged.
5Press ENTER to execute the red-
eye reduction adjustment.
The adjustment takes place.
To reset the adjustment
Press CANCEL in step 5.  The red-eye
reduction is canceled and the window of
step 2 is displayed.
001GBFP5007TV2-UC/CED.p65 3/11/05, 4:22 PM34
Downloaded From ManualsPrinter.com Manuals 
						

							35 GB
Making various printing  (MONITOR OUT mode)
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
Superimposing characters 
You can enter up to 5 lines of characters  to
be superimposed on an image.
1Display the Edit menu (page 31).
2Press g/G/f/F to select  (Text)
and then press ENTER.
The keyboard is displayed.
         Current line number
                  Character input box
Select color and font, and load/
save the messages.
         Select a character.
3Select a font.
The characters are input in the font
displayed in the “FONT” button.  To
select a different font, do the
following:
1Press g/G/f/F to select “FONT”.
2Press ENTER repeatedly until the
desired font is displayed:
Note
You cannot specify multiple fonts and
colors for a sequence of characters input.
All the lines of characters are input in the
identical font and color.  You can change
font and color in the middle of input
procedures;  The changed font and color
will be applied to all the input characters.
4Select a color.
The characters are input in the color
displayed next to “COLOR”.  To
apply different color, do the
following:
1Press g/G/f/F to select
“COLOR” and press ENTER.
The color selection window is
displayed.
2Press g/G/f/F  to select the
desired color and press ENTER.
Note
You cannot apply multiple colors for each
line of characters.
5Press g/G/f/F to select the
desired character, then press
ENTER to input a character.
The selected characters are input in
the character input box. You can enter
up to 50 characters for each single
line.
To change lines
Press g/G/f/F to select # and
press ENTER.
You can enter the maximum of 5 lines.
To input a capital letter
Press g/G/f/F to select “CAPS”
and press ENTER.  The capital letters
keyboard is displayed.  To return to
the small letters input keyboard,
select  “CAPS” again.
Continued
001GBFP5007TV2-UC/CED.p65 3/11/05, 4:22 PM35
Downloaded From ManualsPrinter.com Manuals 
						

							36 GB
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
Items      Procedures
Re-inputThe keyboard is displayed.
Input characters again.
Each time you press ENTER,
the characters become larger.
Each time you press ENTER,
the characters become
smaller.
Move the characters with g/
G/f/F, and then press
ENTER.
Each time you press ENTER,
the characters rotate 90°
clockwise.
Each time you press ENTER,
the characters rotate 90°
counterclockwise.
Note
If a number of input characters is large,
you may not be able to rotate, increase or
decrease the size of characters.
8Press f/F to select  “Execute”,
then press ENTER.
The characters are fixed to the image.
Note
Once you select “Execute”, you cannot
move or delete the characters.
To correct characters in the input
box
•To delete a character before the
cursor ( | ) in the input box
Press g/G/f/F to select “BS” (Back
Space) and press ENTER.  Each time you
press ENTER, a character before the
cursor is deleted.
•To insert a character among the input
characters
Press g/G/f/F to select “B” or “b” on
the window and then press ENTER
repeatedly until the cursor (|) moves to
the position where you want to insert a
character.
6After you finish entering the
remaining characters, press g/G/
f/F to select “NEXT”, and then
press ENTER.
The keyboard is closed and the input
characters are superimposed on the
image.
                                            Adjustment tools
7Press g/G/f/F to select the
desired adjustment tool, then
press ENTER to adjust the size and
position of the characters.
To make multiple adjustments, repeat
this step.
001GBFP5007TV2-UC/CED.p65 3/11/05, 4:22 PM36
Downloaded From ManualsPrinter.com Manuals 
						

							37 GB
Making various printing  (MONITOR OUT mode)
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
Registering commonly-used
characters as a message
You can register commonly-used
characters as a message and can load them
later onto the character input box.    Up to
three messages, each message with the
maximum of 80 characters,  can be
registered.
1Follow steps 1 through 5 in
“Superimposing characters”
(pages 35 and 36) to enter
characters that you want to
register as a message in the input
box.
2Press g/G/f/F to select “LOAD/
SAVE” and press ENTER.
The dialog box to register and save
messages is displayed.
3Press g/G to select “Save” and
then press ENTER.
The message selection screen is
displayed.
4Press f/F to select the message
box that you want to save the
characters in and press ENTER.
The input characters are registered as
a message.To load a registered message
In step 3 above, select “Load” to display
the window used for selecting a message.
Press f/F to select the desired message
and press ENTER. The selected message is
placed in the character input box.
Note
The characters having been input in the input
box will be overwritten and replaced with the
message.
Continued
001GBFP5007TV2-UC/CED.p65 3/11/05, 4:22 PM37
Downloaded From ManualsPrinter.com Manuals 
						

							38 GB
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
Saving and printing an image
Saving an image
When you finish editing or making
creative print or you select “Save” in the
window, the dialog box to select the media
to save the image in is displayed. You can
save the image under a new file number.
Tip
The selected image will not be overwritten.
1Select the destination to save an
image.
Press f/F to select the media
(“Memory Stick”,  “Compact Flash”,
or “SD Cards) and press ENTER.
The dialog box for setting date is
displayed. You can save the date with
the image.
2Set date.
Press f/F to select the number and
press g/G to select the day, month or
year.  Then press ENTER.The image is saved.  The dialog box to
notify the new file number is
displayed.
3Press ENTER.
Note
While saving the image, do not turn off the
printer or remove a memory card from the
printer.  The memory card may be damaged.
Printing an image
1Press PRINT.
The dialog box to specify the print
quantity is displayed.
2Set the print quantity.
•To increase the print quantity one
by one, press ENTER repeatedly.
•To reduce the print quantity one by
one, press CANCEL repeatedly.
•To reset the print quantity to one,
press CANCEL for more than two
seconds.  (You cannot do this
operation with the remote
commander.)
3Press g/G/f/F to select “OK” to
start printing.
The image previewed is printed.
001GBFP5007TV2-UC/CED.p65 3/11/05, 4:22 PM38
Downloaded From ManualsPrinter.com Manuals 
						

							39 GB
Making various printing  (MONITOR OUT mode)
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
Making various prints
(Creative Print)
Displaying the Creative Print
menu
You can display the Creative Print menu
on the TV monitor and make a card,
calendar, split images prints using the
image of a memory card or an external
device.
Buttons to be used in Creative Print
MENU
g/G/f/F/ENTER
CANCEL
PRINT
CREATIVE PRINT
PRINT
g/G/f/F/ENTER
CANCEL
1Press MENU on the printer or
CREATIVE PRINT on the remote
commander.
The menu bar is displayed.  When
you press CREATIVE PRINT, the
Creative Print menu on the step 3 is
displayed.
The menu bar is displayed.
         Creative Print menu icon
    Menu bar
To exit the menu mode
Press MENU.  The previous window
is displayed.
2Press g/G to select  (Creative
Print) and then press ENTER.
The Creative Print  menu is displayed.
Exiting the Creative Print menu
•Press MENU in the middle of the
operations and select “Creative Print
Complete”.
•Display the preview image and then
press g/G/f/F to select “Exit” and
press ENTER.
The dialog box for saving an image may
be displayed (Page 38).
To undo and redo the operation
midway
Press CANCEL.  The window of the
previous step is displayed.  Depending on
the step, you cannot undo the operation.
Tip
You can press MENU while making a Creative
Print and set part of the Set Up menu items.
001GBFP5008TV3-UC/CED.p65 3/11/05, 4:22 PM39
Downloaded From ManualsPrinter.com Manuals 
						

							40 GB
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
Making a free layout print
You can add an image, wallpaper, a
message, characters, a calendar, or stamps
to make an original free
layout print.
1Display the Creative Print menu
(page 39).
2Press g/G/f/F to select “Free
Layout” and then press ENTER.
The print size selection window is
displayed.
3Press g/G to select the print size,
then press ENTER.
The wallpaper selection window is
displayed.
4Press g/G/f/F to select the
desired wallpaper, then press
ENTER.
If you do not want to place wallpaper
on the image, select “No Wallpaper”.
The preview window of the selected
wallpaper is displayed.
                    Selected wallpaper
5Press g/G/f/F to select 
(Image) and press ENTER.
The frame selection window is
displayed.
6Press g/G/f/F to select the
desired frame that you want to
shape an image with, then press
ENTER.
If you do not want to use a frame,
select “No Frame”.
The image list is displayed.
001GBFP5008TV3-UC/CED.p65 3/11/05, 4:22 PM40
Downloaded From ManualsPrinter.com Manuals