Sony Digital Camcorder DSR PD150 Operating Instructions

							121
“Memory Stick” Operations
Superimposing a still image in a “Memory
Stick” on a moving picture – MEMORY MIX
You can superimpose a still image you have recorded on a “Memory Stick” on the top
of the moving picture you are recording.
M. CHROM (Memory chromakey)
You can swap a blue area of a still image such as an illustration or a frame with a
moving picture.
M. LUMI (Memory luminancekey)
You can swap a brighter area of a still image such as a handwritten illustration or title
with a moving picture. Record a title on a “Memory Stick” before a trip or event for
convenience.
C. CHROM (Camera chromakey)
You can superimpose a moving picture on a still image that used as background. Shoot
the subject against a blue background. The blue area of the moving picture will be
swapped with a still image.
M. OVERLAP (Memory overlap)
You can make a moving picture fade in on top of a still image.
M. CHROMStill image Moving picture Moving picture + Still image
Background: blue
Still image Moving picture Moving picture + Still image
Still image Moving picture Moving picture + Still image
Background: blue
M. LUMI
C. CHROM
M. OVERLAPMoving picture
Still image + Still image Moving picture 
						

							122
Before operation
Insert a recorded “Memory Stick” and a tape to be recorded into your camcorder.
(1)Set the POWER switch to CAMERA.
(2)Press MEMORY MIX in standby mode.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
(3)Press MEMORY+/–  or +/– on the Remote Commander to select the still
image you want to superimpose.
To see the previous image, press MEMORY – or – on the Remote Commander.
To see the next image, press MEMORY+ or + on the Remote Commander.
(4)Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM y M. OVERLAP
(5)Press the SEL/PUSH EXEC dial.
The still image is superimposed on the moving picture, and your camcorder is
in standby mode.
(6)Turn the SEL/PUSH EXEC dial to adjust the effect.
(7)Press START/STOP to start recording.
Superimposing a still image in a “Memory Stick” on a moving
picture – MEMORY MIX
2
4
5
6
7
M. LUMI
M. LUMIIII••••
I••••••
3
M. CHROM
M. LUMI
POWER
OFF
(CHG)CAMERA
MEMORY
VCR
1
POWER
OFF
(CHG)CAMERA
MEMORY
VCR
MEMORY MIX
–+
100-0019100-0019
100-0019100-0019
100-0019100-0019
100-0019100-0019
100-0019
100-0019
100-0019
100-0019
Still image 
						

							123
“Memory Stick” Operations
Superimposing a still image in a “Memory Stick” on a moving
picture – MEMORY MIX
Items to be adjusted
M. CHROM The color (blue) scheme of the area in the still picture which is tobe swapped with a moving picture
M. LUMI The color (bright) scheme of the area in the still picture which is
to be swapped with a moving picture
C. CHROM The color (blue) scheme of the area in the moving picture which
is to be swapped with a still picture
M. OVERLAP No adjustment necessary
As the bar is shorter, the effect is enhanced.
To change the still image to be superimposedDo either of the following:
–Press MEMORY+/– before step 6.
–Press the SEL/PUSH EXEC dial before step 6, and repeat the procedure from step  4
(except M. OVERLAP).
To change the mode settingPress SEL/PUSH EXEC dial after step 6, and repeat the procedure from step 4 (except
M. OVERLAP).
To cancel MEMORY MIXPress MEMORY MIX again.
During recording
You cannot change the mode setting.
The “Memory Stick” supplied with your camcorder has 20 images stored
–For M. CHROM: 18 images (such as a frame) 100-0001 to 100-0018
–For C. CHROM: two images (such as background) 100-0019 to 100-0020
Sample images
Sample images stored in the “Memory Stick” supplied with your camcorder are
protected (p. 135).
If a still image to be superimposed has lots of white areas
The thumbnail image may not be displayed clearly.
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with your camcorder.
When the auto logo insert function is activated
You cannot use memory mix function. 
						

							124
Recording an image from a tape as a still
image
Your camcorder can read moving picture data recorded on a tape and record it as a
still image on a “Memory Stick.” Your camcorder can also take in moving picture data
through the input connector and record it as a still image on a “Memory Stick.”
Before operation
Insert a recorded tape and a “Memory Stick” into your camcorder.
(1)Set the POWER switch to VCR.
(2)Press N. The picture recorded on the tape is played back.
(3)Keep pressing PHOTO lightly until the picture from the tape freezes.
“CAPTURE” appears on the LCD screen or in the viewfinder. Recording does
not start yet.
(4)Press PHOTO deeper. The image displayed on the screen will be recorded on
a “Memory Stick.” Recording is complete when the bar scroll indicator
disappears.
When the access lamp is lit or is flashing
Never shake or strike the unit. Also, do not turn the power off , eject a “Memory Stick”
or remove the battery pack. Otherwise, image data breakdown may occur.
If “
” appears on the LCD screen or in the viewfinder
The inserted “Memory Stick” is incompatible with your camcorder because its format
does not conform to that of your camcorder. Check the format of the “Memory Stick.”
If you press PHOTO lightly in the playback mode
The playback pauses momentarily.
Sound recorded on a tape
You cannot record the sound from a tape.
When the auto logo insert function is activated
You cannot use this function.
12
34CAPTURE
PHOTOPHOTO
POWER
OFF
(CHG)CAMERA
MEMORY
VCR
PLAY REW FF 
						

							125
“Memory Stick” Operations
Recording an image from a tape as a still image
Titles that are already recorded on tapes
You cannot record the titles on a “Memory Stick.”
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
Recording a still image from other equipment
(1) Set the POWER switch to VCR and set DISPLAY in  to LCD in the menu
settings.
(2) Play back the recorded tape, or turn the TV on to see the desired program.
The picture from the other equipment appears on the LCD screen or in the
viewfinder.
(3)Follow steps 3 and 4 on page 124.
When recording an image through the VIDEO jack
Connect the yellow plug of the A/V connecting cable supplied with your camcorder to
the video jack on the VCR or the TV.
Connect using an S video cable (not supplied) to obtain high-quality pictures
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your camcorder and
the VCR/TV.
This connection produces higher quality DVCAM/DV format pictures.
VIDEO OUT
S VIDEO
S VIDEO
VIDEO
: Signal flow(not supplied) 
						

							126
S VIDEO LANCDV
Recording an image from a tape as a still image
When recording the image through the  DV IN/OUT jack
: Signal flow
i.LINK cable (DV connecting cable) (not supplied)DV IN/OUT
 DV IN/OUT 
						

							127
“Memory Stick” Operations
Copying still images from a tape – Photo
save
Using the search function, you can automatically take in only still images from tapes
and record them on a “Memory Stick” in sequence.
Before operation
•Insert a recorded tape into your camcorder and rewind the tape.
•Insert a “Memory Stick” into your camcorder.
(1)Set the POWER switch to VCR.
(2)Press MENU to display the menu.
(3)Turn the SEL/PUSH EXEC dial to select 
, then press the dial.
(4)Turn the SEL/PUSH EXEC dial to select PHOTO SAVE, then press the dial.
“PHOTO BUTTON” appears on the LCD screen or in the viewfinder.
(5)Press PHOTO deeply. The still image from the tape is recorded on the
“Memory Stick.” The number of still images copied is displayed. “END” is
displayed when copying is completed.
35
4
MEMORY SET
QUAL I TY
PR I NT  MARK
PROTECT
PHOTO  SAVE
 [
MENU]
 :
 END
MEMORY SET
QUAL I TY
PR I NT  MARK
PROTECT
PHOTO  SAVE
  RETURN
 [
MENU]
 :
 ENDREADY
PHOTO  SAVE 00 : 00 : 00 : 00
 [
PHOTO]
  :
 START    [
MENU]
 :
 END
4 / 15
PHOTO BUTTON
PHOTO  SAVE 00 : 00 : 00 : 00
[
MENU]
 :
 END4 / 15
SAV I NG
0
PHOTO  SAVE 00 : 30 : 00 : 00
[
MENU]
 :
 END8 / 15
END
4
PHOTO
1POWER
OFF
(CHG)CAMERA
MEMORY
VCR
2MENU 
						

							128
Copying still images from a tape – Photo save
To cancel copyingPress MENU.
When the memory of the “Memory Stick” is full“MEMORY FULL” appears on the LCD screen or in the viewfinder, and the copying
stops. Insert another “Memory Stick” and repeat the procedure from step 2.
When the access lamp is lit or flashing
Never shake or strike your camcorder. Also, do not turn the power off, eject the
“Memory Stick” or remove the battery pack. Otherwise, the image data breakdown may
occur.
To record all the images recorded on the tape
Rewind the tape all the way back and start copying.
If the write-protect tab on the “Memory Stick” is set to LOCK
“NOT READY” appears when you select the item in the menu settings.
When you change the “Memory Stick” in the middle of copying
Your camcorder resumes copying from the last image recorded on the previous
“Memory Stick.”
When the auto logo insert function is activated
You cannot use the photo save function. 
						

							129
“Memory Stick” Operations
Viewing a still picture – Memory Photo
playback
You can play back still images recorded on a “Memory Stick.” You can also play back
six images at a time by selecting the index screen.
Before operation
Insert a “Memory Stick” into your camcorder.
(1)Set the POWER switch to VCR or MEMORY. Make sure that the LOCK switch
is set to the right (unlock) position.
(2)Press MEMORY PLAY. The last recorded image is displayed.
(3)Press MEMORY +/– or +/– on the Remote Commander to select the desired
still image. To see the previous image, press MEMORY – or – on the Remote
Commander. To see the next image, press MEMORY + or + on the Remote
Commander.
To stop memory photo playbackPress MEMORY PLAY again.
To play back recorded images on a TV screen
•Connect your camcorder to the TV with the A/V connecting cable supplied with your
camcorder before operation.
•When operating memory photo playback on a TV or on the LCD screen, the image
quality may appear to have deteriorated. This is not a malfunction. The image data is
as good as ever.
•Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
When no images are recorded on the “Memory Stick”
The message “
 NO FILE” appears.
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with your camcorder.
Note on the date/time indicator
Recording date/time is not displayed, however, it is automatically recorded on the
“Memory Stick.” You can check the recording date/time while in memory playback
mode by pressing DATA CODE.
When the auto logo insert function is activated
You cannot do memory photo playback.
12
3–+
PLAY
MEMORYCAMERA
VCR
OFF(CHG)
POWER 
						

							130
Viewing a still picture – Memory Photo playback
Screen indicators during still image playback
On data file name
•When the hyphen is indicated between the directory and the file number, this data file
name means that this file corresponds to the DCF98 standard.
•When the underbar is indicated between the directory and the file number, this data
file name means that this file does not correspond to the DCF98 standard.
•The directory is not indicated if the file structure in the “Memory Stick” does not
correspond to the DCF98 standard.
•The “
 - DIRECTORY ERROR” message may appear if the file structure in the
“Memory Stick” does not correspond to the DCF98 standard. In this case, you cannot
record on that “Memory Stick,” however, you can play back images in the “Memory
Stick.”
•When the data file name is flashes, the file may be broken or the file format does not
correspond to your camcorder.
Playing back six recorded images at a time (index screen)
You can play back six recorded images at a time. This function is especially useful when
searching for a particular image.
(1)Set the POWER switch to VCR or MEMORY. Make sure that the LOCK switch
is set to the right (unlock) position.
(2)Press MEMORY INDEX to display the index screen.
6 / 15MEMORY  PLAY 100–0002
Image number/
Total number of recorded images
Print mark
Protect indicator
Data file name
2INDEX1
MEMORYCAMERA
VCR
OFF(CHG)
P
O
W
E
R