Sony Digital Camcorder DSR PD150 Operating Instructions

							111
Customizing Your Camcorder
Changing the menu settings
Icon/item
BEEP
COMMANDER
DISPLAY
DATE REC
REC LAMP
COLOR BAR
VIDEO EDIT
EDIT SET
HRS METER
Mode
MELODY
zNORMAL
OFF
zON
OFF
zLCD
V-OUT/LCD
zOFF
ON
zON
OFF
zOFF
ON
—
—
OPERATION
DRUM RUN
TAPE RUN
THREADINGMeaning
To chime a melody in normal operations,
and beep a warning sound for five seconds.
To beep in the following situations:
turning on the power, pressing the start/
stop button, and when a warning message
appears.
To cancel the melody, beep, and shutter
click sound.
To activate the Remote Commander
supplied with your camcorder.
To deactivate the Remote Commander to
avoid remote control misoperation caused
by an other VCR’s remote control.
To show the display on the LCD screen and
viewfinder screen.
To show the display on a TV screen, LCD
screen and viewfinder screen.
To not superimpose the date and time on
the picture.
To superimpose the date and time on the
picture.
To light up the camera recording lamps at
the front and rear of your camcorder.
To turn the camera recording lamp off.
Does not display the color bar.
Displays the color bar.
To make programs and perform video
editing (p. 77).
To adjust and set the synchronization of
your camcorder and a VCR for dubbing in
edit set mode (p. 75).
The cumulative total hours of operation is
displayed in 10-operation increments.
The cumulative total hours of drum rotation
with tape threaded is displayed in 10-
operation increments.
The cumulative total hours of tape running
is displayed in 10-operation increments.
The cumulative number of tape unthreading
operation is displayed in 10-operation
increments.POWER
switch
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
CAMERA
CAMERA
MEMORY
CAMERA
VCR
VCR
VCR
CAMERA
Notes
•If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your
camcorder is connected to outputs on the TV or VCR (except using an i.LINK cable
(DV connecting cable)).
•You cannot erase the date and time superimposed using the DATE REC function. 
						

							112
Resetting the date and time
The date and time are set at the factory. Set the time according to the local time in your
country. If you do not use your camcorder for about four months, the date and time
settings may be released because the vanadium-lithium battery installed in your
camcorder will have been discharged (p. 157).
First, set the year, then the month, the day, the hour and then the minute.
(1)Press MENU to display the menu in the standby mode.
(2)Turn the SEL/PUSH EXEC dial to select 
, then press the dial.
(3)Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4)
Turn the SEL/PUSH EXEC dial to adjust to the desired year, then press the dial.
(5)Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(6)Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7)Press MENU to make the menu settings disappear.
The year changes as follows:
If you do not set the date and time
“- -:- -:- -” as time, and “- - -  - -   - - - -” as date will be recorded.
Note on the time indicator
The internal clock of this camcorder operates on a 12-hour cycle.
•12:00 AM stands for midnight.
•12:00 PM stands for noon.
SETUP MENU
CLOCK  SET
LTR S I ZE
   RETURN
2
4
1,73
SETUP MENU
CLOCK  SET
LTR S I ZE
   RETURN
6
SETUP MENU
CLOCK  SET
LTR S I ZE
   RETURNSETUP MENU
CLOCK  SET
LTR S I ZE
   RETURN
JAN   1 2000
12:00:00AM2000  JAN   1
12  00  AM
JUL   4 2000
  5:30:00PM2000  JUL   4
5  30  PM2000  JAN   1
12  00  
AM
 [
MENU]
 :
 END [
MENU]
 :
 END
 [
MENU]
 :
 END [
MENU]
 :
 END
MENU
TC/UB  SET
TC  PRESET
UB  PRESET
TC  FORMAT
TC  RUN
TC  MAKE
UB  T
 I ME
 [
MENU]
 :
 END
2000  JAN   1
12  00  
AM
1995 1996 20792000 
						

							113
“Memory Stick” Operations
— “Memory Stick” Operations —
Using a “Memory Stick” – introduction
You can record and play back still images on the “Memory Stick” supplied with your
camcorder. You can easily play back, record or delete still images. You can exchange
image data with other equipment such as a personal computer etc., using the Memory
Stick Reader/Writer supplied with your camcorder or a PC card adaptor for Memory
Stick (not supplied).
On file format (JPEG)
Your camcorder compresses image data in JPEG format (extension  .jpg).
Typical image data file name
100-0001: As displayed on the LCD screen or in the viewfinder of the camcorder.
Dsc00001.jpg: As displayed on your PC screen.
Before using a “Memory Stick”
•You cannot record or erase still images when the write-protect tab on the “Memory
Stick” is set to LOCK.
•We recommend backing up important data.
•Image data may be damaged in the following cases:
–If you remove the “Memory Stick,” turn the power off, or detach the battery for
replacement when the access lamp is flashing.
–If you use a “Memory Stick” near static electricity or magnetic fields.
•Prevent metallic objects or your finger from coming into contact with the metal parts
of the connecting section.
•Stick its label on the labeling position.
•Do not bend, drop or apply strong shock to a “Memory Stick.”
•Do not disassemble or modify a “Memory Stick.”
•Do not let the “Memory Stick” get wet.
•Do not use or keep a “Memory Stick” in locations that are:
–Extremely hot such as in a car parked in the sun or under the scorching sun.
–Under direct sunlight.
–Very humid or subject to corrosive gases.
•When you carry or store a “Memory Stick,” put it in its case.
A “Memory Stick” formatted by a computerA “Memory Stick” formatted by the Windows OS or Macintosh computers does not
have a guaranteed compatibility with this camcorder.Write-protect tab
Terminal
RearFrontLabeling position 
						

							114
Using a “Memory Stick” – introduction
Notes on image data compatibility•Image data files recorded on a “Memory Stick” by your camcorder conform to the
Design Rules for Camera File Systems universal standard (DCF98 standard)
established by the JEIDA (Japan Electronic Industry Development Association). You
cannot play back on your camcorder still images recorded on other equipment (DCR-
TRV890E/TRV900/TRV900E or DSC-D700/D770) that does not conform to this
universal standard. (These models are not sold in some areas.)
•If you cannot use a “Memory Stick” that is used with other equipment, format it with
this camcorder (p. 108). However, formatting erases all information on the “Memory
Stick.”
“Memory Stick” and 
 are trademarks of Sony Corporation.
•Windows is a registered trademark licensed to Microsoft Corporation, registered in
the U.S.A. and other countries.
•Macintosh and Mac OS are trademarks of Apple Computer, Inc.
•All other product names mentioned herein may be the trademarks or registered
trademarks of their respective companies.
Furthermore, “™” and “®” are not mentioned in each case in this manual. 
						

							115
“Memory Stick” Operations
Using a “Memory Stick” – introduction
Inserting a “Memory Stick”
Insert the “Memory Stick” with the Sony logo pointing toward the LCD panel and the b
mark pointing inward.
To eject a “Memory Stick”Push the “Memory Stick” inward, then release your finger. The “Memory Stick” comes
out a little.
Note
The “Memory Stick” may pop out depending on the way you push it.
When the access lamp is lit or flashing
Never shake or strike your camcorder. Do not turn the power off , eject a “Memory
Stick” or remove the battery pack. Otherwise, image data breakdown may occur.
If the “
 MEMORY STICK ERROR” indicator appears
The “Memory Stick” is broken or the file format is not proper. Eject the “Memory
Stick,” check it, and insert it again. If the same indicator appears, use another “Memory
Stick.”
Access lamp 
						

							116
Using a “Memory Stick” – introduction
Selecting the image quality mode
You can select the image quality mode in still picture recording. The default setting is
SUPER FINE.
(1)Set the POWER switch to VCR or MEMORY. Make sure that the LOCK switch
is set to the right (unlock) position.
(2)Press MENU to display the menu.
(3)Turn the SEL/PUSH EXEC dial to select 
, then press the dial.
(4)Turn the SEL/PUSH EXEC dial to select QUALITY, then press the dial.
(5)Turn the SEL/PUSH EXEC dial to select the desired image quality, then press
the dial.
Image quality settings
Setting Meaning
SUPER FINE This is the highest image quality in this camcorder. The
number of still images you can record is fewer than FINE.
The image is compressed to about 1/3.
FINE Use this mode when you want to record high quality images.
The image is compressed to about 1/6.
STANDARD This is the standard image quality. The image is compressed
to about 1/10.
Note
In some cases, changing the image quality mode may not affect the image quality,
depending on the types of images you are shooting.
1
23
4
5
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT  MARK
PROTECT
SL I DE  SHOW
DELETE  ALL
FORMAT
 [
MENU]
 :
 END
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT  MARK
PROTECT
SL I DE  SHOW
DELETE  ALL
FORMAT
  RETURN
 [
MENU]
 :
 END
SUPER  F I NE
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT  MARK
PROTECT
SL I DE  SHOW
DELETE  ALL
FORMAT
  RETURN
 [
MENU]
 :
 END
SUPER  F I NE
F I NE
STANDARD
MEMORYCAMERA
VCR
OFF(CHG)
POWER
MENU 
						

							117
“Memory Stick” Operations
Using a “Memory Stick” – introduction
Differences in image quality mode
Recorded images are compressed in JPEG format before being stored in memory. The
memory capacity allotted to each image varies depending on the image quality mode
selected. Details are shown in the table below.
Image quality mode Memory capacity
SUPER FINE Approx. 190 KB
FINE Approx. 100 KB
STANDARD Approx. 60 KB
Note on the image quality mode indicator
This is only displayed during recording.
The approximate number of images you can record on a
“Memory Stick”
The approximate number of images you can record on a “Memory Stick” that is
formatted using this camcorder varies depending on which image quality mode you
select and the complexity of the subject.
Image quality mode
SUPER FINE FINE STANDARD
4 MB type (supplied) 20 images 40 images 60 images
8 MB type (not supplied) 40 images 81 images 122 images
16 MB type (not supplied) 82 images 164 images 246 images
32 MB type (not supplied) 164 images 329 images 494 images
64 MB type (not supplied) 329 images 659 images 988 images 
						

							118
Recording still images on a “Memory
Stick” – Memory Photo recording
You can record still images on a “Memory Stick.”
Before operation
Insert a “Memory Stick” into your camcorder.
(1)Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the right (unlock) position.
(2)Keep pressing PHOTO lightly until the desired still picture appears. The green
z mark stops flashing, then lights up. The brightness of the picture and focus
are re-adjusted, being targeted for the middle of the picture and are fixed.
Recording does not start yet.
(3)Press PHOTO deeply. The shutter clicks and the image is frozen. The image
displayed on the screen will be recorded on the “Memory Stick.” Recording is
complete when the bar scroll indicator disappears.
[a]The number of images that can be recorded on the “Memory Stick”
[b]The number of recorded images
When the POWER switch is set to MEMORY
The following functions do not work: wide TV mode, digital effect, title, digital zoom,
fader, and shutter speed (1/30 or smaller) adjustment .
Note
When you press the PHOTO button lightly at step 2, the focus of the image seems to be
momentarily out.
When the auto logo insert function is activated
You cannot do memory photo recording.
1 / 6       SFN2
PHOTO
1
3
PHOTO
SFN[a]
[b]
MEMORYCAMERA
VCR
OFF(CHG)
POWER 
						

							119
“Memory Stick” Operations
Recording still images on a “Memory Stick” – Memory Photo
recording
While you are recording a still image
You can neither turn off the power nor press PHOTO.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
Recording images continuously
You can record still images continuously. Select one of the two modes described below
before recording.
Continuous mode [a]
You can record four still images continuously. The number of images is in accordance
with remaining capacity of the “Memory Stick.”
Multi screen mode [b]
You can record nine still images continuously on a single page.
The number of images in continuous shooting
The number of images you can shoot continuously varies depending on the remaining
capacity of the “Memory Stick.” The shutter always clicks four times, however, the
number of images recordable may be less than four.
Note on using a video flash light (not supplied)
The video flash light does not work in the continuous or multi screen mode if you
install it to the intelligent accessory shoe.
[a][b] 
						

							120
Recording still images on a “Memory Stick” – Memory Photo
recording
(1)Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the right (unlock) position.
(2)Press MENU to display the menu.
(3)Turn the SEL/PUSH EXEC dial to select 
, then press the dial.
(4)Turn the SEL/PUSH EXEC dial to select CONTINUOUS, then press the dial.
(5)Turn the SEL/PUSH EXEC dial to select the desired setting, then press the
dial.
Continuous shooting settings
Setting Meaning (indicator on the screen)
OFF Your camcorder shoots one image at a time. (no indicator)
ON Your camcorder shoots up to four still images at about 0.5 sec
intervals. (  )
MULTI SCRN Your camcorder shoots nine still images at about 0.5 sec intervals
and displays the images on a single page divided into nine boxes.
(  )
If the capacity of the “Memory Stick” becomes full” FULL” appears on the screen, and you cannot record still pictures on this
“Memory Stick.”
2
34
5
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT  MARK
PROTECT
SL I DE  SHOW
DELETE  ALL
FORMAT
 [
MENU]
 :
 END
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT  MARK
PROTECT
SL I DE  SHOW
DELETE  ALL
FORMAT
  RETURN
 [
MENU]
 :
 END
OFFMEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT  MARK
PROTECT
SL I DE  SHOW
DELETE  ALL
FORMAT
  RETURN
 [
MENU]
 :
 END
OFF
ON
MULT I   SCRN
MEMORY SET
CONT I NUOUS
QUAL I TY
PR I NT  MARK
PROTECT
SL I DE  SHOW
DELETE  ALL
FORMAT
  RETURN
 [
MENU]
 :
 END
ON
1
MEMORYCAMERA
VCR
OFF(CHG)
P
O
W
E
R
MENU