Sony Dev5 User Manual

1GB
Getting started
Step 3: Turning the 
power on, and setting 
up this product
Notes
Do not turn the power on with the USB cable 
connected.
Do not connect the USB cable until the 
following procedure is completed.
1
    Set the POWER switch to ON by 
pressing the green button.
This product is turned on.
2
   Adjust the diopter until you 
can see a clear image with each 
eye by turning the diopter 
adjustment dial.
If this product is used by more than one 
person, adjust the diopter each time the...

GB
To set the date and time again, select  (MENU)  [Setup]  [  
(Clock Settings)]  [Date & Time 
Setting]  [Date & Time]. When [Date 
& Time] is not on the screen, press 
/  
until the item appears. 
7
    Select [60i (NTSC)] or [50i (PAL)] 
to suit the TV color system used 
in your country/region, then 
press Enter.
When the 60i/50i selection is made, 
this product restarts to update the 
system.
See page 24 for details on the TV color 
system in your country/region.
8
   Confirm the...

GB
Getting started
10
  Select [Run].
If you select [Run Later], the recording 
mode screen appears. When you turn on 
this product next time, the [Auto 3D Lens 
Adjust] screen will appear.
11
  Adjust the 3D lens.
Aim this product at a subject to display 
it on the screen.
Be sure that the subject produces a scale 
higher than the  mark.
12
  Select 
.
Do not change the subject until the 
adjustment is completed.
Notes
If this product failed [Auto 3D Lens Adjust], 
select [Run Again].


...

GB
To turn off the power
Set the POWER switch to OFF (CHG).
The 
 (Movie) lamp flashes for a few 
seconds and this product is turned off.
Changing the language setting
You can change the on-screen displays to 
show messages in a specified language.
Select 
 (MENU)  [Setup]   
[
 (General Settings)]  [Language 
Setting]  a desired language  
  
  .
Watching the recorded movies on 
a TV
To watch recorded movies on a TV, record 
movies after selecting the appropriate 
[60i/50i Sel] setting...

GB
Getting started
1
   Open the cover, and insert the 
memory card with the nothched 
edge in the direction as 
illustrated until it clicks.
Close the cover after inserting the memory 
card.
The [Preparing image database file. 
Please wait.] screen appears if you 
insert a new memory card. Wait until 
the screen disappears.
2
   Close the cover.
Notes
If [Failed to create a new Image Database File. 
It may be possible that there is not enough free 
space.] is displayed, format the memory...

GB
Binoculars/Recording/Playback
Using this product as 
binoculars
1
   Set the POWER switch to ON by 
pressing the green button.
This product is turned on.
Some settings screen may appear 
depending on the status of this product 
when it is turned on. Use this product 
after completing any necessory 
adjustments.
2
   Make sure that the diopter, the 
width, and the relative vertical 
position of the right and left 
viewfinder fit you (p.
  21).
3
   Hold this product with both 
hands and aim...

GB
Binoculars/Recording/Playback
Tips
The binoculars magnification indicates how big 
the subject looks with the binoculars compared 
with your naked eye.
The zoom ratio indicates the ratio of the focal 
lengths between the minimum and maximum 
value.
Move the power zoom lever slightly for a 
slower zoom. Move it further for a faster 
zoom.
Notes
Be sure to keep your finger on the power zoom 
lever. If you move your finger off the power 
zoom lever, the operation sound of the power 
zoom lever...

GB
Recording
In the default setting, images in the 
viewfinder are displayed in 3D (p. 27), but 
movies are recorded in 2D.
 
Set the POWER switch to ON by 
pressing the green button.
This product is turned on.
Recording movies
   
Press MODE to turn on the  
(Movie) lamp. 
    
Press START/STOP to start 
recording.
The recording lamp lights in red 
during recording.
To stop recording, press START/STOP 
again.
To display items on the screen again
Press the ////Enter button or any 
other...

GB
Binoculars/Recording/Playback
The following states will be indicated if data is 
still being written onto the memory card after 
recording has finished. During this time, do 
not apply shock or vibration to this product, or 
remove the battery or AC Adaptor.Acces
s l

amp (p. 25) is lit or flashing
The media icon in the upper right of the 
screen is flashing
Tips
See page 45 on the recordable time of movies.
You can check the recordable time, estimated 
remaining capacity, etc., by selecting...

0GB
   
Press PHOTO lightly to adjust the 
focus, then press it fully.
When  disappears, the photo is recorded.
Note
You cannot shoot photos in 3D. Select  
(MENU)  [Image Quality/Size]  [2D/3D 
Mode Select]  [2D].
Tips
See page 45 on the recordable number of 
photos.
To change the image size, Select 
 (MENU) 
 [Image Quality/Size]  [Image Size] 
 a desired setting  .
You cannot record photos while  is 
displayed.






Controlling the image settings 
manually with the MANUAL dial
It...