Sony Dav Is10 Operating Instructions

							masterpage:Right
specdef v20060111 filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb06bas.fm]
 model name [DAV-IS10]
 [3-212-589-31(1)]
31GB
Basic Operations
1
Turn on your TV.
2
Switch the input selector on the TV to this system.
3
Press "/1.The system turns on.
Unless the mode of the system is set to “DVD,” press FUNCTION on the remote or FUNCTION 
(soft-touch button) on the control unit to select “DVD.”
“No Disc” appears in the front panel display and the system is ready for loading the disc.
4
Load a disc.Push the disc into the disc slot until the disc is pulled in automatically.
The disc is drawn into the control unit automatically and the following indication appears in the 
front panel display.
5
Press H on the remote, or touch N (soft-touch button) on the control unit.The system starts playback (continuous play).
Adjust the VOLUME +/– on the remote or touch the VOLUME +/– (soft-touch button) on the 
control unit.
Tip You can change the speed at which the volume is turned up and down.
To turn the volume up/down quickly:
– Press and hold the VOLUME +/– on the remote.
– Touch the VOLUME +/– (soft-touch button) on the control unit, when “VOLUME XX” (X is a number) appears, 
touch and hold the VOLUME +/–.
To set the volume up/down precisely:
– Press the VOLUME +/– briefly on the remote.
– Touch briefly VOLUME +/– (soft-touch button) on the control unit.
 When you connect the system and TV with the HDMI cable, you can operate them simply using the HDMI 
CONTROL function. For details, see page 39.Note When you set the HDMI CONTROL function to on, the TV that is connected to the control unit with the HDMI 
cable can be synch-operated with the system. For details, see page 39.
Labeled side facing to upper surface
cont
inue
d
 
						

							masterpage:Left
specdef v20060111 filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb06bas.fm]
 model name [DAV-IS10]
 [3-212-589-31(1)]
32
GB
Basic Operations
To save the power in standby modePress "/1 while the system turns on. To cancel standby mode, press "/1 once.Note When the system is turned off, do not push a disc into the control unit.Additional operations* DVD VIDEOs/DVD-RWs/DVD-Rs only. The button can be used except for DivX video files.
** DVD VIDEOs/DVD-RWs/DVD-Rs/DVD+RWs/DVD+Rs only. The button can be used except for DivX video 
files.Note You may not be able to use the instant replay or instant advance function with some scenes.To PressStopx
PauseX
Resume play after pauseX / H on the remote or N (soft-touch button) on the 
control unit.
Go to the next chapter, track, 
or scene> (except for JPEG)
Go back to the preceding 
chapter, track, or scene. (except for JPEG)
Turn off the sound 
temporarilyMUTING. To cancel muting, press it again or VOLUME 
+ to adjust the sound volume.
Stop play and remove the 
discZ
Replay the previous scene*  (instant replay) during playback.
Briefly fast forward the 
current scene** (instant advance) during playback.
 
						

							masterpage:Right
specdef v20060111 filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb06bas.fm]
 model name [DAV-IS10]
 [3-212-589-31(1)]
33GB
Basic Operations
Selecting the connected componentYou can use a TV, VCR, or other components connected to the TV or SAT/CABLE jacks on the rear 
of the control unit. Refer to the operating instructions supplied with the components for further 
information.Press FUNCTION repeatedly until the desired function name appears in the front panel 
display.Each time you press FUNCTION, the mode of the system changes in the following sequence.
DVD t FM t AM t TV t SAT/CABLE t DMPORT t DVD t …Tip You can assign a digital sound input corresponding with the function “TV” and “SAT/CABLE.” For details, see 
[DIGITAL IN] (page 93).Note When you use both the TV (AUDIO IN) jacks (analog connection) and TV (DIGITAL IN OPTICAL) jack (digital 
connection) at the same time, the digital connection takes priority.Enjoying the Radio or Other Components
FUNCTION 
cont
inue
d
 
						

							masterpage:Left
specdef v20060111 filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb06bas.fm]
 model name [DAV-IS10]
 [3-212-589-31(1)]
34
GB
Basic Operations
Changing the input level of the sound from connected 
componentsDistortion may occur when listening to a component connected to the TV (AUDIO IN) jacks on the 
rear of the control unit. This is not a malfunction and will depend on the component connected.
To prevent this, you can change the input level from the sound of the other components.1
Press FUNCTION repeatedly until “TV” appears in the front panel display.
2
Press SYSTEM MENU.
3
Press X/x repeatedly until “ATTENUATE” appears in the front panel display, then press 
 or c.
4
Press X/x to select a setting.The default setting is underlined.
 “ATT ON”
: attenuates the input level. The output level is changed.
 “ATT OFF”: normal input level.
5
Press .The setting is made.
6
Press SYSTEM MENU.The system menu turns off.
Note “ATTENUATE” appears only when the function is set to the “TV” function.
SYSTEM 
MENUX/x/c, FUNCTION 
With the cover opened.
 
						

							masterpage:Right
specdef v20060111 filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb06bas.fm]
 model name [DAV-IS10]
 [3-212-589-31(1)]
35GB
Basic Operations
You can enjoy TV or VCR sound from all the speakers in this system.
For details, see “Step 3: Connecting the TV” (page 17), “Connecting the TV (Advanced)” (page 21), 
and “Connecting Other Components” (page 24).1
Press FUNCTION repeatedly until “TV” or “SAT/CABLE” appears in the front panel 
display.
2
Press SOUND FIELD repeatedly until the sound field you want appears in the front panel 
display.When you want to output the TV sound or stereo sound of a 2 channel source from the all speakers, 
select the “PLII MOVIE” or “PLII MUSIC” sound field.
For details of sound field, see page 37.
Note When you set the [HDMI CONTROL] setting in [CUSTOM SETUP] to [ON] (page 93), the System Audio Control 
function is activated and no sound may be output from the TV. For details, see page 43.
 When you use both the TV (AUDIO IN) jacks (analog connection) and TV (DIGITAL IN OPTICAL) jack (digital 
connection) at the same time, the digital connection takes priority.Enjoying TV or VCR Sound from All Speakers
SOUND 
FIELD FUNCTION
 
						

							masterpage:Left
specdef v20060111 filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb06bas.fm]
 model name [DAV-IS10]
 [3-212-589-31(1)]
36
GB
Basic Operations
You can choose a suitable sound mode for movies or music.Press MOVIE/MUSIC during playback. Press MOVIE/MUSIC repeatedly until the mode you want appears in the front panel display. The 
default setting is underlined.
 “AUTO”
: selects the mode automatically to produce the sound effect depending on the disc or sound 
stream.
 “MOVIE”: provides sound suitable for movies.
 “MUSIC”: provides sound suitable for music.
Tip When the movie or music mode is selected, “MOVIE” or “MUSIC” lights up in the front panel display. When 
neither “MOVIE” or “MUSIC” lights up in the front panel display, “AUTO” is selected.Note Depending on the disc or source, when you select “AUTO,” the beginning of the sound may be cut off as the 
optimum mode is automatically selected. To avoid cutting the sound, select “MOVIE” or “MUSIC.”Selecting the Movie or Music Mode
     
MOVIE/
MUSIC
With the cover opened.
 
						

							Sound Adjustments
masterpage:Right
specdef v20060111 filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb07sou.fm]
 model name [DAV-IS10]
 [3-212-589-31(1)]
37GB
You can take advantage of surround sound 
simply by selecting one of system’s pre-
programmed sound fields. They bring the 
exciting and powerful sound of movie theaters 
into your home.Press SOUND FIELD.Press SOUND FIELD repeatedly until the sound 
field you want appears in the front panel display.All sound field
Automatic outputting of the 
original soundxAUTO FORMAT DIRECT STANDARDThe auto decoding function automatically 
detects the type of audio signal being input 
(Dolby Digital, DTS, or standard 2 channel 
stereo) and performs the proper decoding if 
necessary. This mode presents the sound as it 
was recorded/encoded, without adding any 
effects (e.g. reverberation).
However, if there are no low frequency signals 
(Dolby Digital LFE, etc.), it will generate a low 
frequency signal for output to the subwoofer.Outputting the sound from 
multiple speakersxAUTO FORMAT DIRECT MULTIThis mode lets you enjoy audio playback of all 
types of discs from multiple speakers.Note The sound is not output from multiple speakers 
depending on the source.
 Depending on the disc or source, the beginning of the 
sound may be cut off as the optimum mode is 
automatically selected. To avoid cutting the sound, 
select “A.F.D. STD.”Outputting 2 channel sources 
like CDs by 5.1channelxDolby Pro Logic II MOVIE/MUSICDolby Pro Logic II produces five full-bandwidth 
output channels from 2 channel sources. This is 
done using an advanced, high-purity matrix 
surround decoder that extracts the spatial 
properties of the original recording without 
adding any new sounds or tonal colorations.Note When the input signal is multi channel source, Dolby 
Pro Logic II MOVIE/MUSIC are canceled and the 
multi channel source is output directly.
 When the bilingual broadcast sound is input, Dolby 
Pro Logic II MOVIE/MUSIC are not effective.
Sound AdjustmentsEnjoying Surround Sound 
by Using Sound Field
     
Sound field DisplayAUTO FORMAT DIRECT 
STANDARDA.F.D. STD
AUTO FORMAT DIRECT 
MULTIA.F.D. MULTI
Dolby Pro Logic II MOVIE PLII MOVIE
Dolby Pro Logic II MUSIC PLII MUSIC
PORTABLE AUDIO 
ENHANCERP. AUDIO
OMNI-DIRECTIONAL 
SOUNDOMNI-DIR
SOUND 
FIELD
cont
inue
d
 
						

							masterpage:Left
specdef v20060111 filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb07sou.fm]
 model name [DAV-IS10]
 [3-212-589-31(1)]
38GB
Enjoying the sound effectxPORTABLE AUDIO ENHANCERThis mode reproduces a clear enhanced sound 
image from your portable audio device. This 
mode is ideal for MP3 and other compressed 
music.xOMNI-DIRECTIONAL SOUNDThis mode reproduces the stereo effect 
everywhere surrounding by five satellite 
speakers.To turn the surround effect offPress SOUND FIELD repeatedly until “A.F.D. 
STD” appears in the front panel display.Tip The system memorizes the last sound field selected 
for each function mode.
Whenever you select a function such as DVD or 
TUNER, the sound field that was last applied to 
function is automatically applied again. For example, 
if you listen to DVD with Dolby Pro Logic II MOVIE 
as the sound field, then change to another function, 
and then return to DVD, Dolby Pro Logic II MOVIE 
will be applied again.
You can adjust the bass, middle, and treble level 
easily.1
Press TONE repeatedly until “BASS,” 
“MIDDLE,” or “TREBLE” appears in the 
front panel display. “BASS”: adjusts the bass level 
(–6.0 – +6.0 dB, 0.5 dB increments).
 “MIDDLE”: adjusts the middle level 
(–6.0 – +6.0 dB, 0.5 dB increments).
 “TREBLE”: adjusts the treble level 
(–6.0 – +6.0 dB, 0.5 dB increments).
2
Press X/x to adjust.The adjusted value appears in the front 
panel display. 
3
Press .Adjusting the Bass, 
Middle, and Treble Level
TONE
X/x, 
 
						

							masterpage:Right
specdef v20060111 filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb08usi.fm]
 model name [DAV-IS10]
 [3-212-589-31(1)]
39GB
Using the HDMI CONTROL Function for ‘BRAVIA’ Theatre Sync
‘BRAVIA’ Theatre Sync can be used only with Sony ‘BRAVIA’ TVs that carry this function.
By connecting Sony components that are compatible with the HDMI CONTROL function with an 
HDMI cable (not supplied), operation is simplified as below:
 One-Touch Play (page 42): By pressing only H on the remote, the TV turns on and is set for DVD 
input mode automatically, and the sound is output automatically from the speakers of this system.
 System Audio Control (page 43): While watching TV, you can select to output the sound from the 
TV speaker or the speakers of this system.
 System Power Off (page 44): When you turn the TV off by using the power button on the TVs 
remote, the system turns off simultaneously.
HDMI CONTROL is a mutual control function standard used by HDMI CEC (Consumer Electronics 
Control) for HDMI (high-definition multimedia interface).
The HDMI CONTROL function will not operate in the following cases:
 When you connect this system to a component which is not correspond with Sonys HDMI 
CONTROL function.
 When you connect the control unit and components using other than the HDMI connection.
We recommend that you connect this system to products featuring ‘BRAVIA’ Theatre Sync.Note Depending on the connected component, the HDMI CONTROL function may not work. See the operating 
instructions of the component.Using the HDMI CONTROL Function for ‘BRAVIA’ Theatre Sync
 
						

							masterpage:Left
specdef v20060111 filename[G:\FM\Sony\0524\DAVIS10\3212589311\3212589311DAVIS10\gb08usi.fm]
 model name [DAV-IS10]
 [3-212-589-31(1)]
40
GB
Using the HDMI CONTROL Function for ‘BRAVIA’ Theatre Sync
Before you use the HDMI CONTROL function, be sure you have performed the following procedures.1
Make sure that the control unit is connected to the TV (compatible with HDMI CONTROL 
function) via the HDMI connection.
2
Turn on the system and the TV.
3
Switch the input selector on the TV so that the signal from the system appears on the 
TV screen.
4
Set the respective HDMI CONTROL function for this system and the TV.For details on this system, see “Setting [HDMI CONTROL] function” below. For details on the 
setting up TV, see the operating instructions of the TV. Depending on the TV, the default setting 
of the HDMI CONTROL function may be off.
Setting [HDMI CONTROL] function1
Press   DISPLAY when the system is in stop mode.The Control Menu display appears on the TV screen.Preparing for the HDMI CONTROL functionTo use the HDMI CONTROL function, set up the system and the TV.
X/x, 
 
DISPLAY