Sony Dav Dz700fw Operating Instructions

Using Various Additional Functions
71GB
You can set 2 kinds of playback restrictions for 
the desired disc.
 Custom Parental Control 
You can set playback restrictions so that the 
system will not play inappropriate discs.
 Parental Control 
Playback of some DVD VIDEOs can be 
limited according to a predetermined level 
such as the age of the users. Scenes may be 
blocked or replaced with different scenes.
The same password is used for both Custom 
Parental Control and Parental Control.
Preventing...

72GB
To turn off the Custom Parental 
Control function
1Follow steps 1 through 3 of “Preventing 
playback of specific discs [CUSTOM 
PARENTAL CONTROL].”
2Press X/x to select [OFF t], then press 
ENTER.
3Enter your 4-digit password using the 
number buttons, then press ENTER.
To play a disc for which Custom 
Parental Control is set
1Insert the disc for which Custom Parental 
Control is set. 
The [CUSTOM PARENTAL CONTROL] 
display appears.
2Enter your 4-digit password using the 
number buttons, then press...

Using Various Additional Functions
73GB
5Press X/x to select [STANDARD], then 
press ENTER.
The selection items for [STANDARD] are 
displayed.
6Press X/x to select a geographic area 
as the playback limitation level, then 
press ENTER.
The area is selected.
When you select [OTHERS t], select and 
enter a standard code in the table on page 74 
using the number buttons.
7Press X/x to select [LEVEL], then press 
ENTER.
The selection items for [LEVEL] are 
displayed.
8Press X/x to select the level you want,...

74GB
Area Code
Changing the password
1Press   DISPLAY while the system is 
in stop mode.
The Control Menu appears.
2Press X/x to select   
[PARENTAL CONTROL], then press 
ENTER.
The options for [PARENTAL CONTROL] 
appear.
3Press X/x to select [PASSWORD t], 
then press ENTER.
The display for entering the password 
appears.
4Enter your 4-digit password using the 
number buttons, then press ENTER.
5Enter a new 4-digit password using the 
number buttons, then press ENTER.
6To confirm your password, re-enter...

Other Operations
75GB
By adjusting the remote signal, you can control 
your TV with the supplied remote.
 If you enter a new code number, the code number 
previously entered will be erased.
 When you replace the batteries of the remote, the 
code number may reset itself to the default (SONY) 
setting. Reset the appropriate code number.
Controlling TVs with the 
remote
Press and hold TV [/1 while entering your 
TV’s manufacturer’s code (see the table) 
using the number buttons. Then release TV 
[/1.
If...

76GB
THEATRE SYNC allows you to turn on your 
SONY TV and this system, changes the system 
mode to “DVD,” and then switches the TV’s 
input source you set with one button push.
Preparing for the THEATRE 
SYNC function
Register the TV’s input source connected to this 
system.
Press and hold TV/VIDEO while entering 
the code for the TV’s input source 
connected to this system (see the table) 
using the number buttons.
The TV’s input source is selected.
Set your TV’s input to the input you used to 
connect...

Other Operations
77GB
 This function is only for SONY TVs. (This function 
may not work on some SONY TVs.)
 If distance between TV and this system is too far, this 
function may not work. Install the system near the 
TV.
 Keep the remote pointed in the direction of the TV 
and this system while entering the code.
Selecting the connected 
component
You can use a VCR or other components 
connected to the VIDEO or SAT jacks on the 
rear panel or AUDIO IN jack on the front panel. 
Refer to the operation...

78GB
component that is connected to the AUDIO IN 
jack on the front panel.
To prevent this, you can change the output level 
of the sound from the AUDIO IN jack on the 
front panel.
1Press AMP MENU.
2Press X/x repeatedly until “AUDIO 
ATT” appears in the front panel 
display, then press ENTER or c.
3Press X/x repeatedly until “ATT ON” 
appears in the front panel display.
The output level is changed.
When you select “ATT OFF” and press x, 
this operation will be canceled.
4Press ENTER or AMP MENU.
The AMP...

Other Operations
79GB
Presetting radio stations
You can preset 20 FM stations, and 10 AM 
stations. Before tuning, make sure to turn down 
the volume to minimum.
1Press FUNCTION repeatedly until the 
band you want appears in the front 
panel display.
2Press and hold TUNING + or – until the 
auto scanning starts.
Scanning stops when the system tunes in a 
station. “TUNED” and “ST” (for stereo 
program) appear in the front panel display.
3Press TUNER MENU.
4Press C/X/x/c repeatedly until 
“MEMORY” appears...

80GB
For automatic tuning, press and hold TUNING + 
or –. Press x when you stop the automatic 
tuning. 
 If an FM program is noisy, press FM MODE so that 
“MONO” appears in the front panel display. There 
will be no stereo effect, but the reception will 
improve. Press the button again to restore the stereo 
effect.
 To improve reception, reorient the supplied antennas 
(aerials).
 You can check the frequency by pressing DISPLAY 
repeatedly (page 60).
Naming preset stations
You can enter a name for...