Sony Dav Dz700fw Operating Instructions
Here you can view all the pages of manual Sony Dav Dz700fw Operating Instructions. The Sony manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.
Page 31
Getting Started 31GB If you connect a digital satellite receiver with an DIGITAL OUT (COAXIAL or OPTICAL) jack The digital satellite receiver can be connected to the VIDEO (OPTICAL DIGITAL IN) or SAT (COAXIAL DIGITAL IN) jack instead of the VIDEO AUDIO IN jacks of the system. The system can accept both the digital and analogue signals. Digital signals have priority over analogue signals. If the digital signal ceases, the analogue signal will be processed after 2 seconds. If you connect a digital...
Page 32
32GB Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains), connect the speakers to the system (page 15). To turn on the system Press "/1. To turn off the system Press "/1. The system enters standby mode. While playing a disc, do not turn off the system by pressing "/1. Doing so may cancel the menu settings. When you turn off the system, first press x to stop playback and then press "/1.After connecting the AC power cord (mains lead), the...
Page 33
Getting Started 33GB After connecting the speakers, surround amplifier, IR transmitter, IR receiver, and the AC power cords (mains leads), adjust the wireless system for good transmission. 1Press "/1 on the system and POWER on the surround amplifier. The system and surround amplifier turn on and the POWER/ON LINE indicator turns red. 2Orient the IR transmitter and IR receiver to face each other. Adjust the position until the POWER/ON LINE indicator turns green. The IR transmitter is movable...
Page 34
34GB To hang the IR receiver on a wall 1Install a commercially available screw in the wall so that it protrudes 4 mm. 2Detach the IR receiver stand and hang it via hole on the rear side of the IR receiver on the screw. Make sure that the IR receiver does not move after installation. When reattaching the IR receiver stand to the IR receiver, attach the stand so that both delta marks on the IR receiver and stand are aligned (page 16). To hang the IR transmitter on a wall 1Rotate the stand of the...
Page 35
Getting Started 35GB Use screws suitable for the material and strength of the wall. Do not install the IR transmitter or IR receiver to a wall of low strength. Sony is not liable for any damage or accident incurred by incorrect installation (i.e. low strength wall, etc.), incorrect use of this product, or natural disaster. When connecting/disconnecting cords, detach the IR transmitter or IR receiver from the wall first. Follow the steps below to make the minimum number of basic adjustments...
Page 36
36GB The Setup Display for selecting the language used in the on-screen display appears. 5Press X/x to select a language. The system displays the menu and subtitles in the selected language. The selectable language is different depending on the area. 6Press ENTER. The Setup Display for selecting the aspect ratio of the TV to be connected appears. 7Press X/x to select the setting that matches your TV type. xIf you have a 4:3 standard TV [4:3 LETTER BOX] or [4:3 PAN SCAN] (page 85) xIf you have a...
Page 37
Getting Started 37GB 13Press X/x to select the surround speaker distance from the listening position. You can set from 0.0 to 7.0 meters (0 to 23 ft). The setting range changes depending on the front speaker setting. 14Press ENTER. Quick Setup is finished. All connections and setup operations are complete. To quit the Quick Setup Press DISPLAY in any Step. If you want to change each setting, see “Using the Setup Display” (page 83). To recall the Quick Setup display 1Press DISPLAY when the...
Page 38
38GB If color irregularity is observed again... Place the speaker further away from the TV set. If howling occurs Reposition the speakers or turn down the volume on the system.
Page 39
Playing Discs 39GB Depending on the DVD VIDEO or VIDEO CD, some operations may be different or restricted. Refer to the operation details supplied with your disc. 1Turn on your TV. 2Switch the input selector on the TV to this system. 3Press "/1. The system turns on. Unless the system is set to “DVD,” press FUNCTION to select “DVD.” 4Press A. 5Load a disc. Place one disc on the tray, and then press A. Do not forcibly press the disc tray closed with your finger, as this may cause malfunction. ...
Page 40
40GB *1 DVD VIDEOs/DVD-RWs/DVD-Rs only. The button can be used except for DivX video files. *2 DVD VIDEOs/DVD-RWs/DVD-Rs/DVD+RWs only. The button can be used except for DivX video files. *3 DATA CDs/DATA DVDs only. If there is no disc in the system, “NO DISC” appears in the front panel display. The Instant Replay function is useful when you want to review a scene or dialogue that you missed. The Instant Advance function is useful when you want to pass over a scene that you don’t want to...