Sony Dav Dz10 Operating Instructions

Other Operations
61GB
THEATRE SYNC allows you to turn on your 
SONY TV and this system, changes the system 
mode to “DVD,” and then switches the TV’s 
input source you set with one button push.
Preparing for the THEATRE 
SYNC function
Register the TV’s input source connected to this 
system.
Press and hold TV/VIDEO while entering 
the code for the TV’s input source 
connected to this system (see the table) 
using the number buttons.
The TV’s input source is selected.
Set your TV’s input to the input you...

62GB
 This function is only for SONY TVs. (This function 
may not work on some SONY TVs.)
 If distance between TV and this system is too far, this 
function may not work. Install the system near the 
TV.
 Keep the remote pointed in the direction of the TV 
and this system while entering the code.
Selecting the connected 
component
You can use a VCR or other components 
connected to the TV/VCR jacks on the rear 
panel. Refer to the operation manual supplied 
with the components for further information...

Other Operations
63GB
Using a Video Cassette 
Recorder
Connect the Video Cassette Recorder to the TV/
VCR jacks on the rear panel.
1Press FUNCTION repeatedly until “TV” 
appears in the front panel display.
2Press AMP MENU.
3Press X/x repeatedly until 
“ATTENUATE” appears in the front 
panel display, then press ENTER or c.
4Press X/x to select “ATT OFF” in the 
front panel display.
The output level is changed.
When you select “ATT ON” and press x, 
this operation will be canceled.
5Press ENTER or AMP...

64GB
6Press X/x to select the preset number 
you want.
7Press ENTER.
The station is stored.
8Repeat 1 to 7 to store other stations.
To change the preset number
Restart from Step 1.
Listening to the radio
Preset radio stations in the system’s memory 
first (see “Presetting radio stations” (page 63)).
1Press FUNCTION repeatedly until “FM” 
or “AM” appears in the front panel 
display.
The last received station is tuned in.
2Press PRESET + or – repeatedly to 
select the preset station you want.
Each time you...

Other Operations
65GB
To erase the character, press C/c 
repeatedly until the character to be erased 
flashes, then press CLEAR.
7Press ENTER.
The station name is stored.You can set the system to turn off at a preset 
time, so you can fall asleep listening to music. 
You can preset the time in 10 minutes 
decrements.
Press SLEEP.
Each time you press this button, the minutes 
display (the remaining time) changes as follows:
To check the remaining time
Press SLEEP once.
To change the remaining time
Press...

66GB
The brightness of the front panel display can be 
set to either of 2 levels.
1Press AMP MENU.
2Press X/x repeatedly until “DIMMER” 
appears in the front panel display, then 
press ENTER or c. 
3Press X/x to select the brightness of 
the front panel display.
4Press ENTER or AMP MENU.
The AMP menu turns off.
 
You can return the system parameters, such as 
preset stations, to the default settings.
1Press "/1 to turn on the system.
2Press x, A, and "/1 on the system at 
the same time.
“COLD...

Settings and Adjustments
67GB
By using the Setup Display, you can make 
various adjustments to items such as picture and 
sound.
For an overall list of Setup Display items, see 
page 88.
Displayed items differ depending on the country 
model.
 Playback settings stored in the disc take priority over 
the Setup Display settings and not all the functions 
described may work.
1Press   DISPLAY when the system is 
in stop mode.
The Control Menu appears.
2Press X/x to select   [SETUP], 
then press ENTER.
The...

68GB
To reset all of the [SETUP] 
settings
1Select [RESET] in Step 3 and press ENTER.
2Select [YES] using X/x.
You can also quit the process and return to 
the Control Menu by selecting [NO] here.
3Press ENTER.
All the settings explained on pages 68 to 73 
return to the default settings. Do not press [/
1 while resetting the system as it takes a 
few seconds to complete.
 When you turn the system on after resetting and no 
disc is in the system, the guide message appears on 
the TV screen. To perform...

Settings and Adjustments
69GB
Choose settings according to the TV to be 
connected.
Select [SCREEN SETUP] in the Setup Display. 
To use the display, see “Using the Setup 
Display” (page 67).
The default settings are underlined.
x[TV TYPE]
Selects the aspect ratio of the connected TV (4:3 
standard or wide).
The default setting varies, depending on the 
country model.
 Depending on the DVD, [4:3 LETTER BOX] may be 
selected automatically instead of [4:3 PAN SCAN] or 
vice versa.
x[SCREEN SAVER]
The...

70GB
x[4:3 OUTPUT]
This setting is effective only when you set [TV 
TYPE] in [SCREEN SETUP] to [16:9] 
(page 69). Adjust this to watch 4:3 aspect ratio 
progressive signals. If you can change the aspect 
ratio on your progressive format (525p/625p) 
compatible TV, change the setting on your TV, 
not the system. 
 This setting is effective only when “P AUTO 
(PROGRESSIVE AUTO)” or “P VIDEO 
(PROGRESSIVE VIDEO)” is selected by using 
PROGRESSIVE (page 20).
Use this to set up playback related and other...