Sony Dav Dz10 Operating Instructions

Getting Started
21GB
Note that the picture will not be clear or no picture will appear if you select these settings when 
either of the above conditions are not met.
xP VIDEO (PROGRESSIVE VIDEO)
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks, and, 
– you want to fix the conversion method to PROGRESSIVE VIDEO for video-based software.
Select this if the image is not clear when you select PROGRESSIVE AUTO.
Note that the picture...

22GB
Connecting the audio cords
Outputs TV sound through the speakers of this system.
To connect the AUDIO OUT jacks of a TV to the TV/VCR (AUDIO IN) 
jacks of this system
Connect a TV to the TV/VCR (AUDIO IN) jacks using an audio cord (not supplied). When connecting 
a cord, be sure to match the color-coded sleeves to the appropriate jacks on the components.
 Be sure to make connections securely to avoid hum and noise. If using the TV/VCR jacks distorts the sound, change 
the attenuate setting (page...

Getting Started
23GB
 
You can enjoy sound using the speakers of this system by connecting the AUDIO OUT jacks of another 
component. For video connection of other components, connect directly to the TV.
 If you connect a TV to the TV/VCR jacks in Step 3 (page 19), you cannot connect other components to the system.
Connecting the system and the other component
Outputs the other component through the speakers of this system.
To connect the AUDIO OUT jacks of other component to the TV/VCR 
(AUDIO IN)...

24GB
Before connecting the AC power cord (mains 
lead) of this system to a wall outlet (mains), 
connect the speakers to the system (page 14).
Install this system so that the power cord can be 
unplugged from the wall socket immediately in 
the event of trouble.
To turn on the system
Press "/1.
To turn off the system
Press "/1. The system enters standby mode.
While playing a disc, do not turn off the system 
by pressing "/1. Doing so may cancel the menu 
settings. When you turn off the...

Getting Started
25GB
Follow the steps below to make the minimum 
number of basic adjustments for using the 
system.
To skip an adjustment, press >. To return to 
the previous adjustment, press ..
1Turn on the TV.
2Press [/1.
 Make sure that the function is set to “DVD.”
3Switch the input selector on your TV so 
that the signal from the system 
appears on the TV screen.
[Press [ENTER] to run QUICK SETUP.] 
appears at the bottom of the screen. If this 
message does not appear, display the Quick 
Setup and...

26GB
10Press X/x to select the center speaker 
distance from the listening position, 
then press ENTER.
You can set from 0.0 to 7.0 meters (0 to 23 
ft).
 The setting range changes depending on the 
front speaker setting.
11Press X/x to select the surround 
speaker distance from the listening 
position.
You can set from 0.0 to 7.0 meters (0 to 23 
ft).
 The setting range changes depending on the 
front speaker setting.
12Press ENTER.
Quick Setup is finished. All connections 
and setup operations are...

Getting Started
27GB
Positioning the speakers
For the best possible surround sound, all the 
speakers other than the subwoofer should be the 
same distance from the listening position (A). 
However, this system allows you to place the 
center speaker up to 1.6 meters (5 ft) closer (B) 
and the surround speakers up to 5.0 meters (16 
ft) closer (C) to the listening position.
The front speakers can be placed from 1.0 to 
7.0 meters (4 to 23 ft) (A) from the listening 
position.
Place speakers as...

28GB
Depending on the DVD VIDEO or VIDEO CD, 
some operations may be different or restricted.
Refer to the operation details supplied with your 
disc.
1Turn on your TV.
2Switch the input selector on the TV to 
this system.
3Press "/1.
The system turns on.
Unless the system is set to “DVD,” press 
FUNCTION to select “DVD.”
4Press A.
5Load a disc.
Place one disc on the tray, and then press A.
 Do not forcibly press the disc tray closed with 
your finger, as this may cause malfunction.
 Do not place...

Playing Discs
29GB
*1 DVD VIDEOs/DVD-RWs/DVD-Rs only. The 
button can be used except for DivX video files 
(except for the United Kingdom models).
*2 DVD VIDEOs/DVD-RWs/DVD-Rs/DVD+RWs 
only. The button can be used except for DivX video 
files (except for the United Kingdom models).
*3 DATA CDs/DATA DVDs only.
 You may not be able to use the Instant Replay or 
Instant Advance function with some scenes.
Resuming playback from the 
point where you stopped the 
disc (Resume Play)
When you stop the disc, the...

30GB
1Press  DISPLAY.
The Control Menu appears.
2Press X/x to select   
[PROGRAM], then press ENTER.
The options for [PROGRAM] appear.
3Press X/x to select [SET t], then 
press ENTER.
4Press c.
The cursor moves to the track row [T] (in 
this case, [01]).
5Select the track you want to program.
For example, select track [02].
Press X/x to select [02] under [T], then 
press ENTER.
6To program other tracks, repeat steps 4 
to 5.
The programmed tracks are displayed in the 
selected order.
7Press H to start...