Home > Sony > PDAs > Sony Clie Peg Tj25 Handheld Instructions Manual

Sony Clie Peg Tj25 Handheld Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Sony Clie Peg Tj25 Handheld Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Customizing your CLIÉ™ handheld (Preferences)81
    Setting the Network preferences for your provider and dial-up server
    Entering a password
    The Password setting identifies the password you use to log into your server or 
    ISP. Your entry in this field determines whether your CLIÉ handheld prompts 
    you to enter a password each time you log into your network:
     If you do not enter a password, your CLIÉ handheld displays the word 
    [-Prompt-] in this field and asks you to enter a password during the log-in 
    procedure.
     If you enter a password, your CLIÉ handheld displays the word 
    [-Assigned-] in this field and does not prompt you to enter a password during 
    the log-in procedure.
    Note
    If you are concerned about security, select [ -Prompt- ] and do not enter a password.
    1Tap next to [Password:] on the Preferences screen for 
    [Network].
    The Password dialog box is displayed.
    2Enter the password you use to log into your server.
    3Tap [OK].
    The field for [Password:] changes to display the word [-Assigned-].
    Selecting a connection
    Use the Connection setting to select the method you want to use to connect to 
    your Internet Service Provider (ISP) or a dial-up server.
    1Tap V next to [Connection:], and select [Standard Modem] 
    on the Preferences screen for [Network]. 
    						
    							Customizing your CLIÉ™ handheld (Preferences)82
    Setting the Network preferences for your provider and dial-up server
    Setting the telephone information
    Define the telephone number you use to connect to your ISP or dial-up server. 
    In addition, you can also define a prefix, disable Call Waiting, and using a 
    calling card.
    Note
    The calling card option works correctly only for AT&T and Sprint long distance services. 
    If you want to call by MCI, you need to set your telephone information by entering the 
    calling card number in the field for [Phone #:] and the phone number in the field for [Use 
    caling card:].
    1Tap next to [Phone:] on the Preferences screen for 
    [Network].
    The Phone Setup screen is displayed.
    2Enter the phone number for your ISP or dial-up server in the 
    field for [Phone #:].
    3Define the following settings if necessary:
    Dial prefix:
    Enter the dial prefix (e.g., “9”) to call an outside line.
    1Tap   next to [Dial prefix:] to change to  .
    Enter the dial prefix (e.g., “9,”) in the field next to [Dial prefix:].
    Disable call waiting:
    When you contract a call-waiting service with your telephone communication 
    company, you have to interrupt the call-waiting function while accessing the 
    Internet. Ask your telephone communication company about the code to interrupt 
    the call-waiting function.
    1Tap   next to [Disable call waiting:] to change to  .
    2
    Enter the code to interrupt the call-waiting function (e.g., “1170,”) in 
    the field next to [Disable call waiting:].
    Use calling card:
    This option is valid in the USA only. 
    You can access the Internet using a calling card.
    Continued on next page
    • • • • • • • • • • • • • • • 
    						
    							Customizing your CLIÉ™ handheld (Preferences)83
    Setting the Network preferences for your provider and dial-up server
    Note
    The calling card option works correctly only for AT&T and Sprint long distance 
    services. If you want to call by MCI, you need to set your telephone information by 
    entering the calling card number in the field for [Phone #:] and the phone number 
    in the field for [Use calling card:].
    1Tap   next to [Use calling card:] to change to  .
    2
    Enter your calling card number (e.g., “,,,,123456...”) in the field next to 
    [Use calling card:].
    Tip
    Usually, waiting time is needed before entering a calling card number. When you 
    enter your calling card number, insert at least three commas before your calling card 
    number for rectifying the waiting time (transmission of a calling card number 
    delays for 2 seconds per one comma).
    4Tap [OK].
    The Preferences screen for [Network] is displayed. 
    						
    							Customizing your CLIÉ™ handheld (Preferences)84
    Setting the Network preferences for your provider and dial-up server
    Adding detailed information to a service template
    If you are using one of the predefined service templates, you probably only 
    need to enter your user name and telephone number. If you are creating a new 
    service template, you may need to provide additional information to your ISP 
    or dial-up server. Use the Details screen to add additional information to a 
    selected service template.
    1Tap [V Service:] on the Preferences screen for [Network], 
    and select the service template (Internet Service Provider 
    name) you want to add detailed information.
    2Tap [Details...].
    The Details screen is displayed.
    3Tap V next to [Connection type:], and select one of the 
    following connection types.
    PPP: 
    Point-to-Point Protocol
    SLIP: 
    Serial Line Internet Protocol
    CSLIP: 
    Compressed Serial Line Internet Protocol
    Tip
    If you are not sure, try PPP; if that does not work, ask your Internet Service Provider 
    (ISP) or your System Administrator for the correct connection type.
    Continued on next page
    • • • • • • • • • • • • • • • 
    						
    							Customizing your CLIÉ™ handheld (Preferences)85
    Setting the Network preferences for your provider and dial-up server
    4Tap V next to [Idle timeout:], and select one of the following 
    options.
    1 Minute: 
    Waits one minute before dropping the connection when you open another 
    application that does not use the network.
    2 Minutes: 
    Waits two minutes.
    3 Minutes: 
    Waits three minutes.
    Never: 
    Keeps your PPP or SLIP connection open until you turn off your CLIÉ handheld 
    (or until it times out). Note that this option will be more costly than others.
    5Tap   next to [Query DNS:] to deselect it.
    6Enter the IP address for [Primary and Secondary DNS:] 
    (Domain Naming System).
    Ask your ISP or System Administrator for the correct Primary or 
    Secondary DNS IP numbers.
    7If you need to enter your CLIÉ handheld’s IP Address, tap 
     next to [IP Address:] to display a permanent IP address 
    field beneath the check box.
    Normally, you do not need to enter this IP address. If you are not sure, 
    select Automatic and go to step 9.
    8Enter your CLIÉ handheld’s IP Address.
    9Tap [OK]. 
    						
    							Customizing your CLIÉ™ handheld (Preferences)86
    Setting the Network preferences for your provider and dial-up server
    Duplicating/deleting additional service templates
    You can create additional service templates from scratch or by duplicating 
    existing templates and editing the information. After you create a new or 
    duplicate template, you can add and edit settings.
    Duplicating an existing service template
    1Tap [V Service:] on the Preferences screen for [Network], 
    and select the service template you want to duplicate.
    2Tap  (Menu).
    The menu is displayed.
    3Tap [Duplicate] from [Service].
    A copy of the service template (The name of an original service 
    template + Copy) is added to the drop-down list for the Service field.
    Deleting a service template
    You can delete an existing service template.
    1Tap [V Service:] on the Preferences screen for [Network], 
    and select the service template you want to delete.
    2Tap  (Menu).
    The menu is displayed.
    3Tap [Delete...] from [Service].
    The Delete Service dialog box is displayed.
    4Tap [OK].
    The selected service template is deleted.
    To cancel deleting, tap [Cancel]. 
    						
    							Customizing your CLIÉ™ handheld (Preferences)87
    Setting the Network preferences for your provider and dial-up server
    Creating log-in scripts
    A log-in script is a series of commands that automates logging in to a network 
    server, such as your corporate network or your Internet Service Provider (ISP).
    You can also use non-ASCII characters or literal characters for Log-in Scripts.
    bFor details, refer to “Non-ASCII Characters for Log-in Scripts” on page 89.
    1Tap V at the top right of the Preferences screen, and select 
    [Network].
    2Tap [V Service:] on the Preferences screen for [Network], 
    and select the predefined service template you want to 
    create log-in scripts.
    3Tap [Details...].
    The Details screen is displayed.
    4Tap [Script...].
    The Log in Script screen is displayed.
    5Tap [V End:], and select one of the following commands.
    If the command requires additional information, a field is displayed to the 
    right of it for you to enter the information.
    Continued on next page
    • • • • • • • • • • • • • • • 
    						
    							Customizing your CLIÉ™ handheld (Preferences)88
    Setting the Network preferences for your provider and dial-up server
    6Repeat Step 4 until the log-in script is complete.
    7Tap [OK].
    The Details screen is displayed.
    8Tap [OK].
    The Preferences screen for [Network] is displayed.
    Wait ForMakes your CLIÉ handheld wait for specific characters 
    from the TCP/IP server before executing the next 
    command.
    Wait For PromptDetects a challenge-response prompt coming from the 
    server and displays the dynamically generated challenge 
    value. Then enter the challenge value into your token 
    card, which in turn generates a response value for you to 
    enter on your CLIÉ handheld. This command takes two 
    arguments, separated by a vertical bar (|) on the input line.
    SendTransmits specific characters to the TCP/IP server to 
    which you are connecting.
    Send CRTransmits a carriage return or LF character to the TCP/IP 
    server to which you are connecting.
    Send User IDTransmits the User ID information entered in the User 
    ID field of the Preferences screen for [Network].
    Send PasswordTransmits the password entered in the Password field 
    of the Preferences screen for [Network]. If you did not 
    enter a password, this command prompts you to enter 
    one. The Password command is usually followed by a 
    Send CR command.
    DelayMakes your CLIÉ handheld wait a specific number of 
    seconds before executing the next command in the log-in 
    script.
    Get IPReads an IP address and uses it as the IP address for your 
    CLIÉ handheld. This command is used with SLIP 
    connections.
    PromptOpens a dialog box and prompts you to enter text (for 
    example, a password or a security code).
    EndIdentifies the last line in the log-in script.
    Continued on next page
    • • • • • • • • • • • • • • • 
    						
    							Customizing your CLIÉ™ handheld (Preferences)89
    Setting the Network preferences for your provider and dial-up server
    Non-ASCII Characters for Log-in Scripts
    The following information enables you to create custom log-in scripts that 
    require non-ASCII characters. It is provided for advanced users who 
    understand the use and requirements of such characters in a custom log-in 
    script.
    Use of ^char
    You may use the caret ( ^ ) to transmit ASCII command characters. If you send 
    ^char, and the ASCII value of character is between @ and _, then the character 
    is automatically translated to a single-byte value between 0 and 31.
    For example, ^M is converted to a carriage return.
    If character is a value between A and Z, then the character sequence is 
    translated to a single-byte value between 1 and 26. If character is any other 
    value, then the character sequence is not subject to any special processing. For 
    example, the string “Joe^M” transmits Joe, followed by a carriage return.
    Carriage return and line feed
    You may include carriage return and line feed commands as part of the log-in 
    script, when they are entered in the following format.
     : Sends or receives a carriage return
     : Sends or receives a line feed
    For example, the string “wait for Joe” waits to receive Joe followed 
    by a carriage return and line feed from the remote computer, before executing 
    the next command in the script.
    Literal characters
    The backslash ( \ ) character defines that the next character is transmitted as a 
    literal character, and is not subject to any special processing ordinarily 
    associated with that character.
    Examples:
     \^ : Includes a caret as part of the string
     \< : Includes a < as part of the string
     \ \ : Includes a backslash as part of the string 
    						
    							Customizing your CLIÉ™ handheld (Preferences)90
    Setting the Network preferences for your provider and dial-up server
    Using the Network preferences menus
    This section describes the menu commands specific to the network 
    preferences. For the menu commands that are common for the CLIÉ handheld 
    applications, refer to “Common menu items” on page 40.
    Service menus
    Options menu
    [New]Creates a new service template.
    [Delete...]Deletes the current service template.
    [Duplicate]Duplicates the current service template.
    [View Log]Displays the Network Log screen that lists the history of 
    your Internet connection.
    Tap [Done] to close the Network Log screen. 
    						
    All Sony manuals Comments (0)

    Related Manuals for Sony Clie Peg Tj25 Handheld Instructions Manual