Sony Clie Peg Tj25 Handheld Instructions Manual

121
Performing the HotSync® operation via LAN (LANSync)
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
6Connect your CLIÉ handheld to your computer with a USB 
cable.
7Rotate the Jog Dial™ navigator to select   (HotSync) on 
the CLIE Launcher and press the Jog Dial™ navigator.
8Tap  (HotSync).
The computer information (Primary PC name and Primary PC address (IP 
address)) is transferred to your CLIÉ handheld. 
When you perform the HotSync
® operation via LAN,...

122
Performing the HotSync® operation via LAN (LANSync)
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
6Tap [OK].
The HotSync screen is displayed again.
Performing the LANSync operation
You can perform the LANSync operation when you have prepared your 
computer settings, CLIÉ handheld settings, and Conduit Setup. Turn on the 
computers and start HotSync
® Manager.
Note
To perform the LANSync operation, both the computer connected to your CLIÉ 
handheld and...

Using 
“Memory Stick™” 
media
This chapter explains how to communicate with another 
Palm OS® PDA device via “Memory Stick” media, how to 
handle “Memory Stick” media, and how to use CLIE Files for 
managing the files/data on “Memory Stick” media.
Using “Memory Stick™” media . . . . . . . . . . .   124
Exchanging data via 
“Memory Stick” media . . . . . . . . . . . . . .   134 

Using “Memory Stick™” media124
Using “Memory Stick™” media
The type of storage media you can use with your CLIÉ handheld
You can use your CLIÉ handheld with “Memory Stick” media as the storage 
media. “Memory Stick” media is specially designed for exchanging and sharing 
files/data among “Memory Stick” media compatible products. Because it is 
removable, “Memory Stick” media can also be used for external files/data 
storage.
“Memory Stick” media enable you to exchange files/data between your CLIÉ...

Using “Memory Stick™” media125
Using “Memory Stick™” media
Note on using “MagicGate Memory Stick” media
Do not handle copyright-protected files/data or directories stored on 
“MagicGate Memory Stick” media with CLIE Files or Windows® Explorer, 
otherwise the files/data may be disabled. To handle copyright-protected files/
data, use a “MagicGate” compliant application.
Notes
When using a “Memory Stick Duo” media with your CLIÉ handheld
 Make sure you use a “Memory Stick Duo” adaptor.
 Make sure you...

Using “Memory Stick™” media126
Using “Memory Stick™” media
 If the battery power of your CLIÉ handheld is running low, an error message 
is displayed and you cannot exchange files/data with “Memory Stick” 
media. If this occurs, connect the AC power adaptor with plug adaptor to 
your CLIÉ handheld or fully charge your CLIÉ handheld.
Use CLIE Files to format the “Memory Stick” media you use in your CLIÉ 
handheld. If you format it using another application, further operation with 
your CLIÉ handheld is...

Using “Memory Stick™” media127
Using “Memory Stick™” media
Protecting the files/data on “Memory Stick” media
To prevent accidental erasure of important files/data, you can use the write 
protect tab on the “Memory Stick” media. 
Write enable position
Slide the tab to the left to select the write enable position. You can read and 
write files/data on the “Memory Stick” media.
Write protect position (LOCK)
Slide the tab to the right to select the write protect position. You can only read 
the files/data on...

Using “Memory Stick™” media128
Using “Memory Stick™” media
Starting an application on “Memory Stick” media
You can start applications on “Memory Stick” media in the same way as applications on 
your CLIÉ handheld. While the power of your CLIÉ handheld is on, the applications in 
the “Memory Stick” media will be displayed on the CLIE Launcher automatically when 
you insert the “Memory Stick” media into the slot. (The feature does not work when 
certain applications are running).
To switch from the CLIE...

Using “Memory Stick™” media129
Using “Memory Stick™” media
3Select   (Card) by rotating the Jog Dial™ navigator, or by 
tap  (Card).
The applications stored in the [/Palm/Launcher] directory on “Memory 
Stick” media are displayed.
You can start an application in the same way that you start an application 
of your CLIÉ handheld.
If you have assigned a name to “Memory Stick” media, then the   (Card 
Name) is displayed in that name.
Note
Depending on the application, some of the features may not work if you...

Using “Memory Stick™” media130
Using “Memory Stick™” media
Viewing information of “Memory Stick” media (Card Info)
You can view information (e.g., remaining memory space) of “Memory Stick” 
media with Card Info. 
1Insert the “Memory Stick” media into your CLIÉ handheld.
2Rotate the Jog Dial™ navigator to select   (Card Info) on 
the CLIE Launcher and press the Jog Dial™ navigator.
The Card Info screen is displayed.
Tip
You can also tap   (Card Info) to display the Card Info screen.
3Tap V next to [Card:]...