Sony Clie Peg Tg50 Handheld Instructions Manual
Have a look at the manual Sony Clie Peg Tg50 Handheld Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
121 Performing a HotSync® operation via a network Exchanging and updating data using a HotSync® operation (Other HotSync® operations) 7Tap Select Service beneath the icon. The Network Preferences screen is displayed. 8Tap the arrow V next to Service and select Unix or Windows RAS from the drop-down list. For details, refer to “Changing the Network preferences” on page 89 and contact the administrator of the remote access server. 9Tap Done. 10Tap the Enter phone # field. The Phone Setup dialog box is displayed. 11Adjust the following settings as needed. 12Tap OK. The HotSync screen is displayed. 13Follow “Performing a HotSync® operation via a modem” on page 112 to select data to be synchronized.
122 Performing a HotSync® operation via a network Exchanging and updating data using a HotSync® operation (Other HotSync® operations) Performing a HotSync® operation via a network You can perform a HotSync® operation via a network when you have prepared your computer setting, CLIÉ handheld setting, and Conduit Setup. 1Rotate the Jog Dial™ navigator to select the HotSync icon and press the Jog Dial™ navigator on the Application Launcher screen. The HotSync screen is displayed. Tip You can also tap the HotSync icon to display the HotSync screen. 2Tap the HotSync icon. A HotSync® operation starts. The message will be displayed to note that the HotSync® operation is complete.
123Exchanging and updating data using a HotSync® operation (Other HotSync® operations) Performing a HotSync® operation via LAN (LANSync) You can perform a HotSync® operation via LAN between your computer and another computer connected to your CLIÉ handheld. Prior to performing a LANSync operation Check the following items. The Palm™ Desktop for CLIÉ software is installed in both computers connected by the LAN. Your CLIÉ handheld is placed on the cradle connected to the HotSync cable correctly and the cradle is connected to the computer properly. Preparing your computer 1Click the HotSync icon in the Windows task tray (bottom right-hand corner of the taskbar) and select Network from the shortcut menu. 2Click the HotSync icon in the Windows task tray again and select Setup from the shortcut menu. The Setup screen is displayed. 3Click the Network tab. 4Click the check box next to the user name for HotSync. 5Click OK. To operate LANSync, you must have network manager skills. Consult a network manager prior to setting LANSync. LANSync via LAN LAN Your computer Continued on next page • • • • • • • • • • • • • • •
124 Performing a HotSync® operation via LAN (LANSync) Exchanging and updating data using a HotSync® operation (Other HotSync® operations) 6Place your CLIÉ handheld in the cradle and press the HotSync button. The computer information (Primary PC name and Primary PC address (IP address)) is transferred to your CLIÉ handheld. When you perform a HotSync ® operation via LAN, your CLIÉ handheld identifies the computer based on the information transferred. Preparing your CLIÉ handheld Follow the steps below to set up your CLIÉ handheld for a HotSync® operation via the LAN. 1Rotate the Jog Dial™ navigator to select the HotSync icon and press the Jog Dial™ navigator on the Application Launcher screen. The HotSync screen is displayed. Tip You can also tap the HotSync icon to display the HotSync screen. 2Tap Local. 3Press and hold the Home /Menu button. The menu is displayed. 4Tap LANSync Prefs in the Options menu. The LANSync Preferences screen is displayed. 5Tap LANSync. Continued on next page • • • • • • • • • • • • • • •
125 Performing a HotSync® operation via LAN (LANSync) Exchanging and updating data using a HotSync® operation (Other HotSync® operations) 6Tap OK. The HotSync screen is displayed. Performing a LANSync operation You can perform a LANSync operation when you have prepared your computer setting, CLIÉ handheld setting, and Conduit Setup. Turn on the computers and start the HotSync ® Manager application. Note To perform a LANSync operation, both computers connected to the cradle and performing a HotSync® are required to be set for LANSync. On each computer, click the HotSync icon in the Windows task tray (bottom right-hand corner of the taskbar) and make sure that Network in the shortcut menu is selected. If not, click Network to check it. 1Rotate the Jog Dial™ navigator to select the HotSync icon and press the Jog Dial™ navigator on the Application Launcher screen. The HotSync screen is displayed. Tip You can also tap the HotSync icon to display the HotSync screen. 2Tap the HotSync icon. A HotSync® operation starts. The message will be displayed to note that the HotSync® operation is complete.
Using “Memory Stick™” media This chapter explains how to communicate with another Palm OS® PDA device via “Memory Stick” media, how to handle “Memory Stick” media, and how to use the CLIE Files application for managing the data on “Memory Stick” media. Using “Memory Stick™” media . . . . . . . . . . . 127 Exchanging data via “Memory Stick” media . . 136
Using “Memory Stick™” media127 Using “Memory Stick™” media What is “Memory Stick” media? “Memory Stick” media is a compact, portable and versatile Integrated Circuit recording medium with a data capacity that exceeds a floppy disk. “Memory Stick” media is specially designed for exchanging and sharing data among “Memory Stick” media compatible products. Because it is removable, “Memory Stick” media can also be used for external data storage. “Memory Stick” media enables you to exchange data between your CLIÉ handheld and computer. To exchange data via “Memory Stick” media, your CLIÉ handheld uses the supplied CLIE Files application. There are two types of “Memory Stick” media: “MagicGate Memory Stick” media, which is equipped with “MagicGate*” copyright protection technology. “Memory Stick” media, which is not equipped with “MagicGate” copyright protection technology. You can use both types of “Memory Stick” media with your CLIÉ handheld. However, to play music files of ATRAC3 format, make sure to use “MagicGate Memory Stick” media. *What is MagicGate? MagicGate is the copyright protection technology that is used for “MagicGate Memory Stick” media or MagicGate compatible devices such as a CLIÉ handheld. MagicGate certifies the compatible device and “MagicGate Memory Stick” media as copyright- protection-compatible devices and encodes data to be played back on devices. The copyrighted data cannot be played back on a device not certificated. “Memory Stick Duo” and “MagicGate Memory Stick Duo” can be also used with your CLIÉ handheld. “Memory Stick PRO**” can be used, but upgrading is required. ** However, you cannot record or play back the copyright protected files using MagicGate. For details, refer to our official Sony CLIÉ website on the back cover. Note on using “MagicGate Memory Stick” media Do not handle copyright-protected files or directories stored on “MagicGate Memory Stick” media with the CLIE Files application or Windows® Explorer, the file may be disabled. To handle copyright-protected files, use a “MagicGate” compliant application such as the SonicStage software. Continued on next page • • • • • • • • • • • • • • •
Using “Memory Stick™” media128 Using “Memory Stick™” media Notes If you use a “Memory Stick Duo” with your CLIÉ handheld bMake sure you use a “Memory Stick Duo” adapter when using a “Memory Stick Duo” with your CLIÉ handheld. bMake sure you insert a “Memory Stick Duo” into the “Memory Stick Duo” adapter in the right direction. bDo not insert a “Memory Stick Duo” adapter into the “Memory Stick” slot of your CLIÉ handheld when a “Memory Stick Duo” is not inserted into the adapter. bMake sure you insert a “Memory Stick Duo” adapter into the “Memory Stick” slot of your CLIÉ handheld in the right direction. Inserting and removing a “Memory Stick” media Insert a “Memory Stick” media into the “Memory Stick” slot. While the power of your CLIÉ handheld is on, the applications in the “Memory Stick” media will be displayed on the Application Launcher screen automatically if you insert the “Memory Stick” media into the slot (the feature does not work when certain application is running). Notes Insert a “Memory Stick” media in the right direction. If it is forced in the wrong direction, it may be damaged. Do not insert a “Memory Stick” media into the place other than the “Memory Stick” slot. The “Memory Stick” LED blinks in orange while your CLIÉ handheld is accessing “Memory Stick” media (Location of the “Memory Stick” slot or “Memory Stick” LED may vary depending on your model.) Continued on next page • • • • • • • • • • • • • • •
Using “Memory Stick™” media129 Using “Memory Stick™” media To remove “Memory Stick” media Make sure that your CLIÉ handheld is not writing to or reading data from “Memory Stick” media. Push the “Memory Stick” media gently into the slot to release it. When the “Memory Stick” media has popped out, pick it out from the slot. Notes on using “Memory Stick” media When you use “Memory Stick” media, follow the precautions below. Avoid touching the terminals of “Memory Stick” media with your fingers or a metal object. Do not drop, bend, or expose “Memory Stick” media to external shock. Do not disassemble or modify “Memory Stick” media. Avoid getting liquid on “Memory Stick” media. Avoid using or storing “Memory Stick” media in a location subject to: – extremely high temperature such as inside of a hot car, the outdoors exposed to direct sunlight, or near a heater – direct sunlight – high humidity – corrosive substances – excessive dust – magnetic fields When storing and carrying “Memory Stick” media, keep it in its original case to ensure protection of important data. Make a backup of important data. Avoid removing “Memory Stick” media from the insertion slot while data is being written or read. To avoid damaging or erasing data, do not – pull out “Memory Stick” media or unplug the AC power adapter while formatting, or reading or writing data. – use “Memory Stick” media in a location subject to static electricity or electrical interference. Push “Memory Stick” media in Pull “Memory Stick” media out b Continued on next page • • • • • • • • • • • • • • •
Using “Memory Stick™” media130 Using “Memory Stick™” media If the battery of your CLIÉ handheld is running short, an error message is displayed and you cannot exchange data with “Memory Stick” media. If this occurs, connect the AC power adapter or fully charge your CLIÉ handheld. Use the CLIE Files application to format the “Memory Stick” media you use in your CLIÉ handheld. If you format it using another application, further operation with your CLIÉ handheld is not guaranteed. If you insert “Memory Stick” media that has been formatted by another application, a message prompting you to format it is displayed. To use “Memory Stick” media in your CLIÉ handheld, follow the instructions to format it. Note, however, that all stored data will be erased. Make sure to stick a dedicated label on the “Memory Stick” media. Protecting the data on “Memory Stick” media To prevent accidental erasure of important data, you can use the write protect tab of “Memory Stick” media. Write enable position Slide the tab to the left to select the write enable position. You can read and write data on the “Memory Stick” media. Write protect position (LOCK) Slide the tab to the right to select the write protect position. You can only read the data in the “Memory Stick” media. Select the write protect position when you insert “Memory Stick” media containing any important data that you do not want to accidentally delete or overwrite. Tip Shape or exact location of the tab may differ from the illustration. LOCK Back side Write Enable PositionWrite Protect Position