Sony Clie Peg Sj22 Handheld Instructions Manual

							101
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Performing the HotSync® operation via a network
Exchanging and updating data using the HotSync® operation (Other 
HotSync® operations)
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for the HotSync® 
operation via a network.
1Rotate the Jog Dial™ navigator to select [HotSync] icon on 
the Application Launcher screen and press the Jog Dial™ 
navigator. 
The HotSync screen is displayed.
Tip
You can also tap [HotSync] icon to display the HotSync screen.
2Tap Modem.
3Tap the Menu   icon.
4Tap Modem Sync Prefs from the Options menu.
The Modem Sync Preferences screen is displayed.
5Tap Network.
6Tap OK.
The HotSync screen is displayed.
Continued on next page
• • • • • • • • • • • • • • • 
						

							102
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Performing the HotSync® operation via a network
Exchanging and updating data using the HotSync® operation (Other 
HotSync® operations)
7Tap Select Service beneath the HotSycn   icon.
The Network Preferences screen is displayed.
8Tap the arrow V next to Service and select Unix or 
Windows RAS from the drop-down list.
b
For details, refer to “Changing the Network preferences” on page 74 and contact 
the administrator of the remote access server.
9Tap Done.
10Tap the Enter phone # field.
The Phone Setup screen is displayed.
11Adjust the each setting as needed.
12Tap OK. 
The HotSync screen is displayed.
13Follow “Performing the HotSync® operation via modem” on 
page 93 to select data to be synchronized. 
						

							103
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Performing the HotSync® operation via a network
Exchanging and updating data using the HotSync® operation (Other 
HotSync® operations)
Performing the HotSync® operation via a network
You can perform the HotSync® operation via a network when you have 
prepared your computer’s settings, CLIÉ handheld setting and Conduit Setup. 
1Rotate the Jog Dial™ navigator to select [HotSync] icon on 
the Application Launcher screen and press the Jog Dial™ 
navigator.
The HotSync screen is displayed.
Tip
You can also tap [HotSync] icon to display the HotSync screen.
2Tap the HotSync   icon.
The HotSync® operation starts.
The message will be displayed to note that the HotSync® operation is 
complete. 
						

							Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
104Exchanging and updating data using the HotSync® operation (Other 
HotSync® operations)
Performing the HotSync® operation via LAN 
(LANSync)
You can perform the HotSync® operation via LAN between your computer and 
another computer connected to your CLIÉ handheld.
Prior to performing the LANSync operation
Verify the following.
 The Palm™ Desktop for CLIÉ software is installed in both computers 
connected by the LAN.
 Your CLIÉ handheld is properly connected to the USB cable and plug 
adapter.
Preparing your computer
1Click the HotSync   icon in the Windows task tray and 
select Network from the HotSync Manager shortcut menu.
2Click the HotSync   icon in the Windows task tray again 
and select Setup from the HotSync Manager shortcut 
menu.
The Setup dialog box is displayed.
3Click the Network tab.
4Click the check box next to the user name for HotSync.
5Click OK.
To perform the LANSync, you must have network administrator skills. 
Consult a network administrator prior to setting LANSync.
LANSync via LAN
LAN
Your computer
Continued on next page
• • • • • • • • • • • • • • • 
						

							105
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Performing the HotSync® operation via LAN (LANSync)
Exchanging and updating data using the HotSync® operation (Other 
HotSync® operations)
6Connect your CLIÉ handheld to your computer and perform 
the HotSync
® operation.
The computer information (Primary PC name and Primary PC address (IP 
address)) is transferred to your CLIÉ handheld. 
When you perform the HotSync
® operation via LAN, your CLIÉ 
handheld identifies the computer based on the information transferred.
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for the HotSync® 
operation via the LAN.
1Rotate the Jog Dial™ navigator to select [HotSync] icon on 
the Application Launcher screen and press the Jog Dial™ 
navigator. 
The HotSync screen is displayed.
Tip
You can also tap [HotSync] icon to display the HotSync screen.
2Tap Local.
3Tap the Menu   icon.
4Tap LANSync Prefs from the Options menu.
The LANSync Preferences screen is displayed.
5Tap LANSync.
Continued on next page
• • • • • • • • • • • • • • • 
						

							106
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Performing the HotSync® operation via LAN (LANSync)
Exchanging and updating data using the HotSync® operation (Other 
HotSync® operations)
6Tap OK.
The HotSync screen is displayed.
Performing the LANSync operation
You can perform the LANSync operation when you have prepared your 
computer’s settings, CLIÉ handheld setting and Conduit Setup. Turn on the 
computers and start HotSync
® Manager.
Note
To perform the LANSync operation, both computers are required to be set for the 
LANSync. On each computer, click the HotSync   icon in the Windows task tray 
and make sure that Network in the HotSync Manager shortcut menu is selected. If 
not, click Network to select.
1Rotate the Jog Dial™ navigator to select [HotSync] icon on 
the Application Launcher screen and press the Jog Dial™ 
navigator.
The HotSync screen is displayed.
Tip
You can also tap [HotSync] icon to display the HotSync screen.
2Tap the HotSync   icon.
The HotSync® operation starts. 
The message will be displayed to note that the HotSync® operation is 
complete. 
						

							Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Using “Memory Stick®” 
media
This chapter explains how to communicate with another 
Palm OS® PDA device via “Memory Stick” media, how to 
handle “Memory Stick” media and how to use Memory Stick 
Gate for managing data on “Memory Stick” media.
Using “Memory Stick®” media . . . . . . . . . . . . 108
Exchanging data via “Memory Stick” media  . .   117 
						

							Using “Memory Stick®” media108
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Using “Memory Stick®” media
What is “Memory Stick” media?
“Memory Stick” media is a new, compact, and portable Integrated Circuit 
recording medium with a data capacity that exceeds a floppy disk. “Memory 
Stick” media is specially designed for exchanging and sharing data among 
“Memory Stick” media compatible products, such as a digital video camera, 
etc. Because it is removable, “Memory Stick” media can also be used for 
external data storage.
“Memory Stick” media enables you to exchange data between your CLIÉ 
handheld and your computer. To exchange data via “Memory Stick” media, 
your CLIÉ handheld uses Memory Stick Gate.
Types of “Memory Stick” media
There are two types of “Memory Stick” media:
 “MagicGate Memory Stick” media, which is equipped with “MagicGate” 
copyright protection technology.
 “Memory Stick” media, which is not equipped with “MagicGate” copyright 
protection technology.
You can use both types of “Memory Stick” media with your CLIÉ handheld. 
However, make sure to use “MagicGate Memory Stick” media when you want 
to play ATRAC3 format files.
What is MagicGate?
MagicGate is the copyright protection technology that is used for “MagicGate 
Memory Stick” media or MagicGate compatible devices, such as a CLIÉ 
handheld. MagicGate certifies the device and “MagicGate Memory Stick” 
media as copyright-protection-compatible devices and encodes data to be 
played back on devices. The copyrighted data cannot be played back on a 
device that is not certificated.
Note on using “MagicGate Memory Stick” media
Do not handle copyright-protected files or directories stored on “MagicGate 
Memory Stick” media with Memory Stick Gate or Windows® Explorer, as 
the file may be disabled. To handle copyright-protected files, use a 
“MagicGate” compliant application, such as SonicStage. 
						

							Using “Memory Stick®” media109
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Using “Memory Stick®” media
Inserting and removing “Memory Stick” media
Insert “Memory Stick” media into the “Memory Stick” slot.
While your CLIÉ handheld is turned on, the applications in “Memory Stick” 
media will be displayed on the Application Launcher screen automatically if 
you insert “Memory Stick” media into the slot. (The feature does not work 
when a certain application is running.)
Notes
 Insert “Memory Stick” media in the right direction. If it is forced in the wrong 
direction, it may be damaged.
 Do not attempt to insert “Memory Stick” media into anywhere other than the 
“Memory Stick” slot.
To remove “Memory Stick” media
Make sure that your CLIÉ handheld is not writing to or reading data from 
“Memory Stick” media. Push “Memory Stick” media gently into the slot and 
release it. When “Memory Stick” media has popped out, pick it out from the 
slot.
The “Memory Stick” LED blinks 
in orange while your CLIÉ 
handheld is accessing “Memory 
Stick” media
Push “Memory Stick” media in Pull “Memory Stick” media out
b 
						

							Using “Memory Stick®” media110
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Using “Memory Stick®” media
Notes on using “Memory Stick” media
When you use “Memory Stick” media, follow the precautions below.
 Avoid touching the terminals of “Memory Stick” media or touching them 
with a metal object.
 Do not drop, bend, or expose “Memory Stick” media to external shock.
 Do not disassemble or modify “Memory Stick” media.
 Avoid getting “Memory Stick” media wet.
 Avoid using or storing “Memory Stick” media in a location subject to:
– extremely high temperature such as inside of a hot car, the outdoors 
exposed to direct sunlight, or near a heater
– direct sunlight   – high humidity
– corrosive substances – excessive dust
– magnetic fields
 When storing and carrying “Memory Stick” media, keep it in its original case 
to ensure protection of important data.
 Make a backup of important data.
 Avoid removing “Memory Stick” media from the “Memory Stick” slot while 
data is still being written or read.
 To avoid damaging or erasing data, do not
– pull out “Memory Stick” media or unplug the AC power adapter while 
formatting, or reading or writing data.
– use “Memory Stick” media in a location subject to static electricity or 
electrical interference.
 If the battery of your CLIÉ handheld is running short, the error message is 
displayed and you cannot exchange data with “Memory Stick” media. If this 
occurs, connect the AC power adapter or fully charge your CLIÉ handheld.
Use Memory Stick Gate to format “Memory Stick” media you use in your 
CLIÉ handheld. If you format it using another application, further operation 
with your CLIÉ handheld is not guaranteed.
 If you insert “Memory Stick” media that has been formatted by another 
application, the message prompting you to format it is displayed. To use 
“Memory Stick” media in your CLIÉ handheld, follow the instructions to 
format it. Note, however, that all stored data will be erased.