Sony Clie Handheld Instructions Manual

111
Performing a HotSync® operation via a network
Exchanging and updating data using a HotSync® operation (Other 
HotSync® operations)
6Place your CLIÉ handheld on the cradle and press the  
HotSync  button.
The computer information (Primary PC name and Primary PC address (IP 
address)) is transferred to your CLIÉ handheld. 
When you perform a HotSync
® operation via a network, your CLIÉ 
handheld identifies the computer based on the information transferred. 

112
Performing a HotSync® operation via a network
Exchanging and updating data using a HotSync® operation (Other 
HotSync® operations)
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for a HotSync® operation 
via a network.
1Rotate the Jog Dial™ navigator to select the HotSync icon 
and press the Jog Dial™ navigator on the Application 
Launcher screen. 
The  HotSync  screen is displayed.
Tip
You can also tap the HotSync icon to display the  HotSync screen.
2Tap Modem ....

113
Performing a HotSync® operation via a network
Exchanging and updating data using a HotSync® operation (Other 
HotSync® operations)
7Tap  Select Service  beneath the icon.
The Network Preferences  screen is displayed.
8Tap the arrow V next to  Service  and select Unix or Windows 
RAS from the drop-down list.
For details, refer to “Changing the Network preferences” on page 71 and 
contact the administrator of the remote access server.
9Tap  Done .
10Tap the  Enter phone #  field.
The Phone Setup...

114
Performing a HotSync® operation via a network
Exchanging and updating data using a HotSync® operation (Other 
HotSync® operations)
Performing a HotSync® operation via a network
You can perform a HotSync® operation via a network when you have prepared 
your computer setting, CLIÉ handheld setting, and Conduit Setup. 
1Rotate the Jog Dial™ navigator to select the HotSync icon 
and press the Jog Dial™ navigator on the Application 
Launcher screen.
The  HotSync  screen is displayed.
Tip
You can also tap...

115Exchanging and updating data using a HotSync® operation (Other 
HotSync® operations)
Performing a HotSync® operation via LAN 
(LANSync)
You can perform a HotSync® operation via LAN between your computer and 
another computer connected to your CLIÉ handheld.
Prior to performing a LANSync operation
Check the following items.
 The Palm™ Desktop for CLIÉ software is installed in both computers  connected by the LAN.
 Your CLIÉ handheld is placed on the cradle correctly and the cradle is  connected to...

116
Performing a HotSync® operation via LAN (LANSync)
Exchanging and updating data using a HotSync® operation (Other 
HotSync® operations)
6Place your CLIÉ handheld on the cradle and press the 
HotSync  button.
The computer information (Primary PC name and Primary PC address (IP 
address)) is transferred to your CLIÉ handheld. 
When you perform a HotSync
® operation via LAN, your CLIÉ handheld 
identifies the computer based on the information transferred.
Preparing your CLIÉ handheld
Follow the steps...

117
Performing a HotSync® operation via LAN (LANSync)
Exchanging and updating data using a HotSync® operation (Other 
HotSync® operations)
6Tap  OK.
The  HotSync  screen is displayed.
Performing a LANSync operation
You can perform a LANSync operation when you have prepared your 
computer setting, CLIÉ handheld setting, and Conduit Setup. Turn on the 
computers and start the HotSync
® Manager application.
Note
To perform a LANSync operation, both computers connected to the cradle and 
performing a...

Using “Memory Stick®” 
media
This chapter explains how to communicate with another 
Palm OS® PDA device via “Memory Stick” media, how to 
handle “Memory Stick” media, and how to use the CLIE Files 
application for managing the data in “Memory Stick” media.
Using “Memory Stick®” media . . . . . . . . . . . . 119
Exchanging data via “Memory Stick” media  . .   128 

Using “Memory Stick®” media119
Using “Memory Stick®” media
What is “Memory Stick” media?
“Memory Stick” media is a new, compact, and portable Integrated Circuit 
recording medium with a data capacity that exceeds a floppy disk. “Memory 
Stick” media is specially designed for exchanging and sharing data among 
“Memory Stick” media compatible products, such as a digital video camera. 
Because it is removable, “Memory Stick” media can also be used for external 
data storage.
“Memory Stick” media enables you...

Using “Memory Stick®” media120
Using “Memory Stick®” media
Inserting and removing a “Memory Stick” media
Insert a “Memory Stick” media into the “Memory Stick” slot.
While the power of your CLIÉ handheld is on, the applications in the “Memory 
Stick” media will be displayed on the Application Launcher screen 
automatically if you insert the “Memory Stick” media into the slot. (The feature 
does not work when certain application is running.)
Notes
 Insert a “Memory Stick” media in the right direction. If...