Sony Bdv Iz1000w Operating Instructions

Settings and Adjustments
61GB
MEDIA,” “HDMI1,” or “HDMI2” is output from the 
system’s speakers, not from the HDMI (OUT) jack.
 When you set [Audio Output] to [HDMI], the 
SOUND MODE, “TONE,” “NIGHT MODE,” and 
“SUR.SETTING” functions are disabled.
 When the System Audio Control function (page 50) 
is activated, this setting may change automatically.
x[Sound Effect]
You can set the system’s sound effects (SOUND 
MODE, “TONE,” “NIGHT MODE,” and 
“SUR.SETTING”
) to on/off.
[On]
: Enables all of the...

62GB
[Parental Control 
Settings]
x[Password]
Set or change the password for the Parental 
Control function. A password allows you to set 
a restriction on BD-ROM, DVD VIDEO, or 
Internet video playback. If necessary, you can 
differentiate the restriction levels for 
BD-ROMs, DVD VIDEOs, and Internet videos.
x[Parental Control Area Code]
Playback of some BD-ROMs or DVD VIDEOs 
can be limited according to the geographic area. 
Scenes may be blocked or replaced with 
different scenes. Follow the on-screen...

Settings and Adjustments
63GB
[Control for HDMI]
You can set the [Control for HDMI] function to 
on/off.
[On]
: On. You can operate mutually between 
components that are connected with an HDMI 
cable.
[Off]: Off.
[Audio Return Channel]
This function is available when you connect the 
system and TV that is compatible with the Audio 
Return Channel function.
[Auto]
: The system can receive the digital audio 
signal of the TV automatically via an HDMI 
cable.
[Off]: Off.
Note This function is available only...

64GB
[Deregistration Code]: The deregistration code 
is displayed. (This item can be selected only 
after the registration code is displayed.)
When the registration is enabled
Press C/c to select [OK] or [Cancel], then 
press .
[OK]: The device is deregistered and the 
deregistration code is displayed.
[Cancel]: The system returns to the previous 
display.
For more information, go to 
http://www.divx.com
 on the Internet.
x[System Information]
You can display the system’s software version 
information...

Additional Information
65GB
Precautions
On safety
 To prevent fire or shock hazard, do not place objects 
filled with liquids, such as vases, on the system, or 
place the system near water, such as near a bathtub or 
shower room. Should any solid object or liquid fall 
into the cabinet, unplug the system and have it 
checked by qualified personnel before operating it 
any further.
 Do not touch the AC power cord (mains lead) with 
wet hands. Doing so may cause an electric shock.
On power sources
 Unplug...

66GB
On moving the system
 Before moving the system, make sure that there is no 
disc inserted, and remove the AC power cord (mains 
lead) from the wall outlet (mains).
About S-AIR function
 As the S-AIR products transmit sound by radio 
waves, sound may skip when radio waves are 
obstructed. This is a characteristic of radio waves and 
is not malfunction.
 As the S-AIR products transmit sound by radio 
waves, equipment that generates electromagnetic 
energy, such as a microwave oven, may prevent...

Additional Information
67GB
Troubleshooting
If you experience any of the following difficulties while using the system, use this troubleshooting 
guide to help remedy the problem before requesting repairs. Should any problem persist, consult your 
nearest Sony dealer.
Note that if service personnel changes some parts during repair, these parts may be retained.
In the event of a problem with the S-AIR function, have a Sony dealer check the entire system together 
(S-AIR main unit and sub unit).
Power...

68GB
Sound
No picture appears when the 
video output resolution selected 
in [Output Video Format] is 
incorrect. Press and hold N and VOLUME – on the unit for more than 5 seconds to reset 
the video output resolution to the lowest resolution.
Video signals are only output 
from the HDMI (OUT) jack 
when connecting the HDMI 
(OUT) jack and other video 
output jacks at the same time. Set [Output Video Format] in [Screen Settings] to [Component Video] 
(page 59).
The dark area of the picture is too...

Additional Information
69GB
There is no sound from the 
subwoofer. Check the speaker connections and settings (pages 18, 52).
There is no digital sound from 
the HDMI (OUT) jack when 
using the Audio Return Channel 
function. Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] 
(page 62). Also, set [Audio Return Channel] in [HDMI Settings] of [System 
Settings] to [Auto] (page 62).
 Make sure that your TV is compatible with the Audio Return Channel function.
 Make sure that an HDMI...

70GB
Operation
There is no sound from the 
surround speakers or surround 
back speakers.Check the status of the S-AIR/STANDBY indicator on the surround amplifier.
 Turns off.
– Check that the AC power cord (mains lead) of the surround amplifier is 
connected securely.
– Turn the surround amplifier on by pressing "/1 on the surround amplifier.
 Flashes orange.
– Check that the wireless transceiver is inserted into the surround amplifier 
correctly (page 24).
 Flashes green quickly.
– Set the SURROUND...