Sony Bdv Iz1000w Operating Instructions

Other Operations
51GB
can change the output method to the speakers 
of the TV via the TV menu.
 When sound of the TV or other components is 
output from the speakers of the system, you 
can adjust the volume and turn off the sound of 
the system using the TV remote.
Note While the TV is in PAP (picture and picture) mode, 
the System Audio Control function will not work.
 Depending on the TV, when you adjust the units 
volume, the volume level appears on the TV screen. 
In this case, the volume level that...

52GB
5Connect the calibration mic to the 
A.CAL MIC jack on the rear panel.
Set up the calibration mic at ear level using 
a tripod, etc. (not supplied). The front of 
each speaker should face the calibration 
mic, and there should be no obstruction 
between the speakers and the calibration 
mic.
6Press X/x to select [OK].
To cancel, select [Cancel].
7Press .
[Auto Calibration] starts.
The system adjusts the speaker settings 
automatically.
For proper calibration results, please 
remain quiet during the...

Other Operations
53GB
3Press X/x to select [Audio Settings], 
then press  .
4Press X/x to select [Speaker Settings], 
then press  .
The [Speaker Settings] display appears.
5Press X/x to select the item, then press 
.
Check the following settings.
x[Connection]
If you do not connect center or surround 
speakers, set the parameters for [Center] and 
[Surround]. Since the front speaker and 
subwoofer settings are fixed, you cannot change 
them.
When you use the Wireless Surround Speaker 
Kit (WAHT-SBP2,...

54GB
x[Test Tone]
The speakers will emit a test tone to adjust 
[Level].
[Off]
: The test tone is not emitted from the 
speakers.
[On]: The test tone is emitted from each speaker 
in sequence while adjusting level. When you 
select one of the [Speaker Settings] items, the 
test tone is emitted from each speaker in 
sequence.
Adjust the sound level as follows.
1Set [Test Tone] to [On].
2Press X/x to select [Level], then press 
.
3Press X/x to select the desired speaker 
type, then press  .
4Press C/c to...

Other Operations
55GB
Controlling Your TV or 
Other Components with 
the Supplied Remote
You can control your TV and other components 
such as a cable box or digital satellite receiver 
with the supplied remote. The remote is initially 
set to control Sony components.
You can control non-Sony components by 
changing the preset code of the remote. For 
operation, see “Changing the preset code of the 
remote (Preset mode)” (page 56).
You can also set a new code which is not stored 
on the remote. For...

56GB
 If you press other than the buttons above when the 
remote is in TV or STB mode, the TV or STB 
operation mode button does not light up.
 Depending on the TV or component, you may not be 
able to use some of the buttons.
1Press HOME.
The home menu appears on the TV screen.
2Press C/c to select   [Setup].
3Press X/x to select [Remote Controller 
Setting Guide], then press  .
4Press X/x to select [Preset Mode], then 
press .
5Press X/x to select the component type 
that you want to operate with the...

Other Operations
57GB
9Point the remotes at each other.
10Press the button on the other remote 
that you want to program to the 
supplied remote.
Note If you do not press a button for more than 10 
seconds after Step 8, the supplied remote status 
returns to its status after Step 7. Re-perform 
from Step 8.
11Repeat Steps 8 to 10 to continue 
programming more buttons.
If you successfully program the remote 
code, the BD operation mode button will 
flash twice slowly. If the setting is 
unsuccessful, the...

58GB
Using the Setup Display
You can make various adjustments of items such 
as picture and sound.
Select   (Setup) on the home menu when you 
need to change the settings of the system.
The default settings are underlined.
Note Playback settings stored in the disc take priority over 
the Setup Display settings and not all the functions 
described may work.
1Press HOME.
The home menu appears on the TV screen.
2Press C/c to select   [Setup].
3Press X/x to select the setup category 
icon to change, then...

Settings and Adjustments
59GB
[Network Update]
You can update and improve the functions of the 
system.
For information about update functions, refer to 
the following website:
http://support.sony-europe.com/
During a software update, “UPDATING” 
appears in the front panel display and video 
signals via HDMI may not be displayed. After 
the update completes, the main unit 
automatically turns off. Please wait for the 
software update to complete; do not turn the 
main unit on or off, or operate the main...

60GB
x[BD/DVD-ROM 1080/24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz video 
signals only when connecting a 1080/24p-
compatible TV using the HDMI OUT jack.
[Off]: Select this when your TV is not 
compatible with 1080/24p video signals.
x[YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the type of 
external device, and switches to the matching 
color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video 
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video 
signals.
[RGB]: Select this when connecting to a...