Sony Ba 6 Service Manual

 SERVICE MANUAL BA-6 CHASSIS
 
In an effort to reduce the size of this pdf fi le the tiled 
schematics are not attached to this Service Manual. 
To receive a complete set of the tiled schematics for 
this manual please submit a request to Nita Wardlaw at 
[email protected].  

 Connecting Additional Equipment4-094-813-21
KV-27FS100L
© 2003 by Sony Corporation 
Operating Instructions
01US01COV-BR2.book  Page 1  Tuesday, May 20, 2003  3:37 PM 

 Connecting Additional Equipment
WARNING
To reduce the risk of fire or electric shock, do not expose the 
TV to rain or moisture.
This symbol is intended to alert the user to the 
presence of uninsulated “dangerous voltage” 
within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electric 
shock to persons.
This symbol is intended to alert the user to the 
presence of important operating and maintenance 
(servicing) instructions in the literature 
accompanying the...

 User Guide
IMPORTANT SAFEGUARDS
For your protection, please read these instructions 
completely, and keep this manual for future reference. 
Carefully observe and comply with all warnings, cautions 
and instructions placed on the set, or described in the 
operating instructions or service manual.
WARNING
To guard against injury, the following basic safety 
precautions should be observed in the installation, use, and 
servicing of the set.
Use
Power Sources
This set should be operated only from 
the type...

 Connecting Additional Equipment
Never cover the slots and openings 
with a cloth or other materials.

Never block the slots and openings 
by placing the set on a bed, sofa, rug 
or other similar surface.
Never place the set in a confined 
space, such as a bookcase or built-in 
cabinet, unless proper ventilation is 
provided.
Do not place the set near or over a 
radiator or heat register, or where it is 
exposed to direct sunlight.
Power-Cord Protection
Do not allow anything to rest on or roll over...

Contents
Introduction
Introducing the FD Trinitron WEGA Features........................................................................... 1
About this Manual .......................................................................................................................... 2
Batteries for the Remote Control .................................................................................................. 2
Front Panel Menu Controls...

1
Introduction
Congratulations on your purchase of the Sony FD Trinitron WEGA®. 
Introducing the FD Trinitron WEGA  Features
Some of the features you will enjoy include:
❏FD Trinitron Flat CRT — Delivers a picture with uncompromising accuracy and 
outstanding image detail via a technologically advanced tube.
❏Y,  PB, PR Inputs — Provides component video inputs for superior picture quality 
(480i only).
❏Surround — Simulates theater quality sound for stereo programs.
❏Parental Control (V-Chip) — Helps...

2
 Operating Instructions
About this Manual
This manual provides instructions to help you enjoy your new TV. It shows you how to 
connect to an antenna or cable, cable box, VCR, DVD, satellite receiver, stereo system, or 
camcorder. Once your TV is connected, follow the instructions and use the remote control to 
access the on-screen menus.
Batteries for the Remote Control
Insert two AA (R6) batteries (supplied) into the remote control using the following illustration 
as a guide.
Front Panel Menu...

3
Using the Remote Control
Remote Control Description
Button Description
1MUTINGPress to turn off the sound. Press again or press 
 to restore sound.
2SYSTEM OFFPress to turn off the equipment programmed into 
the remote control. See “Programming the Remote 
Control” on page 5.
3TV/VCRPress to switch between TV and VCR mode. If you 
have a non-Sony VCR, you will need to program 
the remote control to recognize your VCR. For 
details; see “Programming the Remote Control” on 
page 5.
4PICTURE MODEPress...

4
 Operating Instructions
qsFUNCTION buttonsPress to select the equipment (VCR/DVD, SAT/
CABLE, TV) that you want to operate with the 
remote control. The indicator (LED) lights up 
momentarily when pressed to show which device 
the remote control is operating.
qdVCR (operating)Press to operate your VCR. The VCR must be 
programmed into the remote control. For 
instructions, see “Programming the Remote 
Control” on page 5.
 and 
(to record)Press the   button and the   button at the same 
time to record...