Smeg Sta6445 Instruction Manual
Have a look at the manual Smeg Sta6445 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 81 Smeg manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
INSTRUCTION MANUAL GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS
Contents
1
1.
Description of the controls _______________________ _________ 2
2. Operating instructions ____________________________ _______ 13
3. Cleaning and maintenance __________________________ _____ 26
4. Troubleshooting ___________________________________ ____ 30
Thank you for choosing one of our products.
You are advised to read this manual carefully; it c ontains all the
information you need about the right conditions for the proper, safe use
of your dishwasher.
The individual sections are laid out to provide you with a step-by-step
guide to all your appliances functions; the texts are easy to understand
and are complete with detailed illustrations.
Recommendations are given for the correct use of th e baskets, spray
arms, containers, filters, washing programs, and fo r operating the
controls.
Following the cleaning instructions provided here w ill keep your
dishwashers performance at peak levels in the long term.
This user-friendly manual will provide answers to a ll your questions
about use of the dishwasher.
USER INSTRUCTIONS: these consist of recommendations for using the
appliance, a description of its controls and of the correct cleaning and
maintenance procedures.
User instructions
2
1. Description of the controls
1.1 Upper panel All the dishwasher controls are grouped on the uppe r panel. Switch-on,
programming, switch-off, etc. procedures are only p ossible when the door is open.
The panel shown is only a guideline example: the fo rm of the lights and
buttons may vary depending on the model.
1 ON/OFF BUTTON
Press this button to switch the dishwasher on/off.
2
SELECTED PROGRAM INDICATOR LIGHTS
Illumination of this light denotes the program sele cted and the
occurrence of a fault (troubleshooting).
3
PROGRAM SELECTION BUTTON
+ ADJUSTING THE WATER SOFTENING SYSTEM
Used to select the washing program required and adj ust the water
softening system.
4
WATER HARDNESS ADJUSTMENT ON INDICATOR LIGHT
The light flashes to indicate that the appliance is in “water hardness
adjustment” mode.
SALT WARNING LIGHT (on some models only)
If the symbol is present, illumination of this lig ht denotes a
regenerating salt warning level.
5 RINSE AID WARNING LIGHT (on some models only)
Illumination of this light denotes a rinse aid warn ing level in the tank.
6 PROGRAM DELAY BUTTON
Press this button to delay the start of the program .
7 INFORMATION DISPLAY (1 or 3 digits depending on model)
8 OPTIONS (on some models only)
User instructions
3
Information displayed
no Scheduled program
duration yes
no Remaining program
time yes
1 - 9 hours Delayed start 1 - 24 hours
E
Error message Err
Some components are live even with the ON/OFF butto n in the OFF position. Before maintenance work on the appliance, remove the plug or turn off the power supply at the wall switch.
Depending on the model, this zone may contain one o r more of the
following options, identified by the relative symbo ls and described in
more detail in the relevant sections of the manual.
It is not possible to select any options when the soak program is being
used. All options except Flexi Tabs are disabled at the end of the
wash cycle. To disable the “Flexi Tabs” option, press the relative
button (the light goes out).
Flexi Tabs
Option recommended for the use of multi-function ta blet
detergent.
HYCLEAN
Adds a final antibacterial rinse to the selected pr ogram.
Spread HALF LOAD WASH
Allows washing of just a few dishes placed in both baskets.
PROGRAM DELAY
Allows the program to be set to start with a delay of 9, 12 or
24 hours depending on the model.
User instructions
4
PROGRAMS TABLE The manual contains the programs table for several models. To find the
table for your dishwasher, compare the program symb ols at the top of the
table with those on your control panel.
SETTING THE WASHING PROGRAM AND SWITCHING ON After identifying the most suitable program with th e aid of the programs
table:
· Press the ON/OFF button (1) and wait for the PROGRAM
INDICATOR LIGHT (2) to illuminate;
· Keep pressing the PROGRAM SELECTION button (3) until the
indicator light corresponding to the desired progra m illuminates;
· select the option required (if any and if the mode l provides options);
· close the door; after about 2 the program will start LIGHT will
flashing (indicating that the program is being exec uted).
PROGRAM IN PROGRESS INDICATOR LIGHT
(on some models only)
When a program is running, a flashing light is proj ected onto the floor
under the right-hand corner of the door. At the end of the program, the
light goes out to reduce sleep mode electricity con sumption.
User instructions
5
PROGRAMS TABLE
PROGRAMME NUMBER & SYMBOL
LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS
DURATION CONSUMPTION MINUTES (1)
WATER LITRES POWER KWh (1)
1 SOAK
Pans and dishes awaiting completion of the load Cold prewash 15 (3) 3,5 0,02
2 RAPID
Dishes with light dirt, washed immediately after use
Wash at 38°C Rinse at 50°C
27 (3)
6,5 0,70
3 ECO (*)
EN 50242
Dishes with normal dirt, even with dried-on residues
Wash at 50°C Cold rinse Rinse at 65°C Dry
**
** **
4 NORMAL
IEC/DIN***
Dishes with normal dirt, even with dried-on residues
Cold prewash Wash at 65°C Cold rinse Rinse at 70°C Dry
105 (3)
13,5 1,35
5 SUPER
****
Very dirty pans and dishes, even with dried-on residues.
Hot prewash Wash at 70°C Cold rinse (2) Rinse at 70°C Dry
150 (3)
15,5 1,70
IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.
If the dishwasher door is open or not properly clos ed, the washing cycle
will not start.
User instructions
6
PROGRAMS TABLE
PROGRAMME NUMBER & SYMBOL
LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS
DURATION CONSUMPTION MINUTES (1)
WATER LITRES POWER KWh (1)
1 SOAK
Pans and dishes awaiting completion of the load Cold prewash 15 (3) 3,5 0,02
2 RAPID
Dishes with light dirt, washed immediately after use
Wash at 38°C Rinse at 50°C
27 (3)
6,5 0,70
3 ECO (*)
EN 50242
Dishes with normal dirt, even with dried-on residues
Wash at 50°C Cold rinse Rinse at 65°C Dry
**
** **
4 NORMAL
IEC/DIN***
Dishes with normal dirt, even with dried-on residues
Cold prewash Wash at 65°C Cold rinse Rinse at 70°C Dry
105 (3)
13,5 1,35
5 ULTRA CLEAN
****
Very dirty pans and dishes, even with dried-on residues.
Hot prewash Wash at 70°C Cold rinse (2) Rinse at 70°C Dry
150 (3)
15,5 1,70
The ULTRA CLEAN program terminate with an extra anti-bacteria rins e that ensures
a further reduction in the bacteria level. If the t emperature falls during this stage of
the program (e.g. because the door is opened or due to a power blackout), the
program lights (2) flash to warn that the anti-bacteria effect is not guaranteed.
IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.
If the dishwasher door is open or not properly clos ed, the washing cycle
will not start.
User instructions
7
PROGRAMS TABLE
PROGRAMME NUMBER & SYMBOL
LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS
DURATION CONSUMPTION MINUTES (1)
WATER LITRES POWER KWh (1)
1 SOAK
Pans and dishes awaiting completion of the load Cold prewash 15 (3) 3,5 0,02
2 RAPID
Dishes with light dirt, washed immediately after use
Wash at 38°C Rinse at 50°C
27 (3)
6,5 0,70
3 ECO (*)
EN 50242
Dishes with normal dirt, even with dried-on residues
Wash at 50°C Cold rinse Rinse at 65°C Dry
**
** **
4 HALF LOAD
Half load of dishes with normal dirt, washed immediately after use.
Wash at 65°C Cold rinse Rinse at 70°C Dry
90 (3)
11 1,20
5 ULTRA CLEAN
****
Very dirty pans and dishes, even with dried-on residues.
Hot prewash Wash at 70°C Cold rinse (2) Rinse at 70°C Dry
150 (4)
15,5 1,70
The ULTRA CLEAN program terminate with an extra anti-bacteria rins e that ensures
a further reduction in the bacteria level. If the t emperature falls during this stage of
the program (e.g. because the door is opened or due to a power blackout), the
program lights (2) flash to warn that the anti-bacteria effect is not guaranteed.
IMPORTANT: see “NOTES AND REFERENCES” table on the following pages.
If the dishwasher door is open or not properly clos ed, the washing cycle
will not start.
User instructions
8
NOTES AND REFERENCES Only run the soak program with half loads. Options cannot be used with the soak program. * Standard programme under EN 50242.
** See information sheet provided
*** IEC/DIN reference programme.
**** Reference program for laboratories: Detergent: 20g in the dispenser + 10g in
the door or tablet. Configuration : see photo in “Using the baskets”.
(1) Program consumption and duration figures have b een measured in
accordance with the EN 50242 standard. Values may vary depending on
intake water and room temperatures and the type and quantity of dishes
loaded.
(2) 1 or 2 cold rinses depending on the model.
(3) For 3 digit models, see display.
REFERENCES
for the ENERGY LABEL supplied with the dishwasher:
- Annual energy consumption is based on 280 standard wash cycles with cold
water and consumption of low-energy operating modes . Actual consumption
depends on the way in which the appliance is used.
- Water consumption is based on 280 standard wash cycles. Actual
consumption depends on the way in which the applian ce is used.
- Information refers to the
EN 50242 STANDARD programme (identified in the
programmes table), which is the most effective in t erms of combined energy
and water consumption. The programme is recommended for dishes with a
normal level of dirt.
- Drying efficiency class on a scale from “G” (minimum efficiency) to “A”
(maximum efficiency).