Singer Professional 5 Manual
Here you can view all the pages of manual Singer Professional 5 Manual. The Singer manuals for Sewing Machine are available online for free. You can easily download all the documents as PDF.
Page 81
Three-Thread Flatlock (narrow) page 5
Page 82
Page 83
Page 84
Two-Thread Flatlock (narrow) page 8
Page 85
3. Thread the top cover thread guide by pulling the thread towards the left until
it slips under the guide. Then pull the thread along the right side of the
button as illustrated.
4. While holding the thread firmly, pull the thread between the tension disks.
5. Turn the handwheel toward you until the lower looper extends 5-10mm
(approximately ½ inch) from the needle plate edge.
6. Thread the looper area of the...
Page 86
7. Thread the hole in the Upper Looper from front to back k. Pull about 4
inches of thread through the looper and place to the back of the
throat plate.
Page 87
Three-Thread Flatlock (narrow) page 11
10. Thread the looper eye (A) from front to back. Pull about 4 inches of thread.
Position thread into V cutout (B) on threader. Firmly hold thread tail with left
hand and pull Threader lever (C) up into place (D).
NOTE: Make sure the Upper Looper thread is
behind the Lower Looper thread.
Threader Lever “V” cutout
Page 88
Page 89
5. Continue to thread points 4-8. Slip the thread into the rear slot of the
thread guide g. Go over the take up lever h. Continue by slipping the
thread into the right slot of the thread guides i and j.
8. Before threading the eye of the needle, make sure the thread is
behind
the thread guide located on the bottom of the needle clamp.
9. Draw about 4 inches of the thread through the needle eye towards...
Page 90
