Sim2 Multimedia Projector Ht3000 User Manual

21
ht3000

same key as before. Use the ▲ key to switch from upper case 
to lower case characters. Cancel errors with ▼ once you have 
selected the character in question. Once you have terminated 
the text input procedure confirm your text and save it by pres-
sing the MENU+ key on the remote control. If you wish to cancel the 
modifications, press MENU- on the remote control.
F1-F2 keys
The remote control is equipped with two keys (F1 and F2) which 
are associated with various different functions.
The...

22
ht3000

making a total of 24 different available Memories.
The  image  parameters  that  can  be  saved/recalled  by  the 
Memories management system are the following:
               Image                     Picture
                    BRIGHTNESS                             ASPECT
                    CONTRAST                            COLOUR TEMPERATURE
                    COLOUR                            OVERSCAN 
                    TINT                            GAMMA...

23
ht3000
232)
GRAPHICS RGB
HVS-VIDEO
AUDIO OUTHDMI 1
REMOTE
2S-VIDEO
MENU
ESCINPUT
1
5
4
HDMI 26

Fig.32
Save memory
To  save  the  image  parameter  current  values  in  memor y  1, 
move the cursor to line ‘1’ with the ▼ and ▲ ‚ keys and open 
the pull-down menu by pressing the ◀ key (Fig.33). Now select 
Save current settings. To confirm the operation, the message 
Current settings saved in Memor y.
Memories 2...6 can be saved using the same procedure.
 
0  Auto
3       S   MEMORIA 1
-EMORIES
Save...

24
ht3000

INFO
Displays  the  current  status  of  the  projector  and  information 
concerning the projected video/graphic signal. 
This function is displayed on pressing the  key on the remote 
control (or, in the absence of the On Screen Display, the ▶ key 
on the keypad).
QUICK MENUS
The quick menus provide access to the main adjustments that 
affect image quality without calling the main menu. Brightness,  
CONTRAST , COLOUR, TINT, SHARPNESS
and FILTER adjustments appear at 
the bottom of the...

25
ht3000

11  TROUBLESHOOTING GUIDE
No power (LEDs always OFF)
•  Check that the units’ power switches are set to I.
•  Check that the power cables are correctly connected to 
the units’ power sockets.
•  Check  the  condition  of  the  fuse  located  on  the  power 
socket on the rear of the projector.
•  Replace the fuse located on the projector’s power socket with an 
identical type (T 5A H).
•  If the fuse blows repeatedly, seek technical assistance from 
your nearest Dealer.
Lamp fails to switch...

26
ht3000

You  can  purchase  the  following  optional  accessories  at  your 
Dealer:
  - Ceiling mount kit
  - Lens
A  range  of  lenses  are  available  from  our  dealers  to  satisfy 
var ying  installation  and  projection  distance  needs.  See  the 
Additional Information chapter for greater details on projection 
distance and enlargement ratios.
Always contact our service centre to have the lens replaced. 
12   OPTIONAL ACCESSORIES
Use only original or SIM2 Multimedia approved accessories....

27
ht3000

ELECTRONICS
Input signals: 
 • COMPOSITE VIDEO (CVBS)
           gold plated RCA connectors 
           1,0 V
pp / 75 Ω, negative synchronisation
  • 1 S-VIDEO (Y/C)
                4-pole mini-DIN connector
           Y: 1.0 V
pp / 75 Ω, negative synchronisation 
      C: 0.286 Vpp / 75 Ω, [ nominal NTSC burst level] 
      0.3 Vpp / 75 Ω [nominal PAL, SECAM burst level]
  • 1 COMPONENTS (Y/Pr/Pb/) - RGBS  
      1 set of 4 RCA connectors
         - Component signals  
              Y: 1.0...

28
ht3000

B  ON SCREEN MENU LAYOUT
     IMAGE
 PICTURE
Brightness
Contrast
Color
Tint 
Sharpness
Filter
Cinema Mode
Video Type 
Video • S-Video[NTSC]        HDMI™ 1-2
Orientation
Keystone
Lens
Power ON 
Test patterns 
Initial settings 
Lamp Power 
FloorFloor-rearCeilingCeiling-rear
Normal
Anamorphic
Letterbox
PanoramicSubtitles
Pixel to Pixel
User 1
User 2
User 3Horizontal
VerticalScreen control
Horizontal
VerticalScreen control
Horizontal
VerticalScreen control
Brightness
Contrast
Sharpness
Sharpness...

2
ht3000

SETUP
Always        Stand-by
OrientationKeystonePower ON
Test patterns
Logo light on
Initial settings
FloorFloor-rearCeilingCeiling-rear
HorizontalVertical
AutoStand-by
LanguageSource listF1/F2 keysSource infoOSD backgroundOSD PositionOSD Timeout
ZoomFocuaMagnificationBlankColor temperatureGamma correction
Yes    No
ItalianoEnglish
Français
EspañolDeusch
Português
2  S-VIDEO 
4  GRAPHICS RGB  5 
3COMPONENT / RGBS
1  VIDEO1
2
345HDMI
S-VIDEO 2
GRAPH RGB 4HDMI 5
COMP RGB 3
VIDEO 1...

30
ht3000

C DIMENSIONS