Sim2 Multimedia Projector Ht3000 User Manual
Here you can view all the pages of manual Sim2 Multimedia Projector Ht3000 User Manual. The Sim2 Multimedia manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
11 ht3000 SWITCHING OFF AND RETURNING TO STANDBY With the remote control: press . With the keypad: press . When switching off, the projector goes into stand-by mode and stores the input selection at the time of switch-off. The fans keep running until the lamp cools down (green and red leds on), after which they automatically switch off. Do not switch off the projector with the power switch until the fans have stopped running. 6 CONNECTIONS To obtain the best performance from your...
Page 12
12 ht3000 HT3000 - Connection panel 31245 Television receiver DVD player VCR Videocamera Video game console Television receiver HDTV receiver DVD player VCR Video game console ComputerDVD player HDTV receiver Fig.16 6 +12V USB 1.1R/Pr CONTROL (RS232)GRAPHICS RGB C/YB/Pb HVS-VIDEO AUDIO OUT HDMI 1 REMOTE 3 2 S-VIDEO MENU ESCSOURCE 1 4 O I 1 VIDEO GRAPHICS RGB 4 3 RGB - YPrPb HDMI 5 HDMI 6 5 2 S-VIDEO HDMI 26
Page 13
13 ht3000 of the pictures reproduced by the HT3000 in the two cases: the deinterlacing performed by the HT3000 is often more effective than that performed by the source itself. GRAPHICS RGB This input should be connected to an RGB-type video or graphic signal using a cable with a DB15HD type connector. The signal source device (typically a personal computer or game console) must be able to provide separate H/V synchronisation or composite H+V synchronisation. HDMI™ HDMI™ (High Definition...
Page 14
14 ht3000 RS232 INTERFACE CONNECTOR The projector can be controlled from a PC: simply hookup the interface connector to a PC ’s RS232 serial cable or to a PC's USB 1.1 cable. Do not place objects between the remote control and the receiver on the projector, as this can prevent the remote from working. 764# 3$S$0 /530 - 3 4 (3 1)* $4 3( #$:#$ C)747*%&0 6%*0 0 65) %.* 3&.05&47*%&0. &/ 6&4$*/ 165)% .*0I 12 MOTORISED SCREEN OUTPUTS +12V USB 1.1R/Cr...
Page 15
15 ht3000 MAIN MENU To access the main menu of the On Screen Display press the MENU key on the keypad or the MENU+ or MENU- key on the remote control. The main menu is divided into four windows, PICTURE, IMAGE, SETUP and MENU, in which the various adjustments are grouped according to the frequency of use. Use the ▲ and ▼ keys to select the line corresponding to the adjustment you wish to make (Fig. 21). The various menus only offer the relevant...
Page 17
17 ht3000 NORMAL: projects the image occupying the full height of the screen while maintaining the aspect ratio of the input signal. When the input signal aspect ratio is 4:3 black vertical bands are displayed on the right and left of the picture. ANAMORPHIC: correctly displays a 16: image. LETTERBOx: serves to display a 4:3 letterbox image (with source signal having black bands above and below the picture) so that it fills the 16: screen and maintains the correct...
Page 18
18 ht3000 There are 4 sets of gamma curves: Standard (ST), Enhanced SIM2 (EN) and Graphics (GR), User. The Standard curve has been defined for general use, and is set for videocameras, digital cameras, and for viewing films or photos on your PC. The Enhanced set is suitable for watching movies. The Graphics set is suited to displaying synthetic graphics (PC, CAD, PC presenta-tions, etc.). User enables you to define your own curve. You can thus select the coefficient which...
Page 19
1 ht3000 Values from 1.5 to 2.2 allow you to emphasise the detail of dark images, but reduce overall contrast. Values higher than 2.2 increase overall contrast, but reduce the detail of dark areas. For the most common video sources, the overscanning value can be in the range (no overscanning) to 32 (maximum). The resulting image always maintains the selected aspect irrespec- tive of the selected overscan value. POSITIONUse this adjustment to position the image vertically and...
Page 20
20 ht3000 MENUS LANGUAGE It allow to select the languages available for the On Screen Display menus. INPUTS LIST In order to make the HT3000 system increasingly flexible, the functions described below make it possible to modify the inputs selection menu and adapt it so that it matches the require- ments of the user more closely. The main page displays all the inputs physically present on the projector. You can delete any inputs which are not in use. To do...