Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions

SATURN EPABX 
JR-DYAD User Instructions A30808-X5051-C150-l-B919 
Issue 1, June 1985 
SECTION 1.00 INTRODUCTION 
1.01 General. This document provides step-by-step instruc- 
tions for accessing SATURN Electronic Private Automatic 
Branch Exchange (EPABX) features from the SATURN 
JR-DYAD. The JR-DYAD has sixteen buttons for line appear- 
ances and feature access. See Figure 1.00. Eight of the but- 
tons are assigned fixed features and are labeled as follows: 2. Last Line Preference - Automatically selects...

SATURN EPABX 
JR-DYAD User Instructions A30808-X5051-C150-l-B919 
Issue 1, June 1985 
e. 
f. 
9. 
h. 
i. 
L 
k. 
I. SATURN EPABX telephone call is waiting to be an- 
swered, or two bursts of tone heard when an outside 
trunk call is waiting to be answered at your JR-DYAD. 
This tone is repeated after 10 seconds if the waiting 
party is still present. 
Conference Tone - One burst of tone heard when a 
called party is being added to a conference to which 
you are connected. 
Confirmation Tone -Three rapid...

A30808-X5051-CEO-l-B919 
Issue 1,June 1985 
Figure 1.00 JR-DYAD Digital Telephone 
l-3 (l-4 blank)  

SATURN EPABX A30808-X5051-C150-l-B919 
JR-DYAD User Instructions issue 1, June 1985 
SECTION 2.00 JR-DYAD FIXED FEATURE BUTTONS 
2.01 Hang Up. Depressing the Hang Up button will cause 
a change in the on-/off-hook state of the JR-DYAD. This func- 
tion can substitute for removing or replacing the handset on 
the hookswitch when a series of consecutive calls are being 
made or when a headset is being used instead of a handset. 
2.02 On Hook-Dial. Depressing this button allows placing 
a call to another...

A30808-X5051-C150-l-B919 
Issue 1, June 1985  SATURN EPABX 
JR-DYAD User instructions 
To transfer a call: 
Ask the other party to wait. 
C. 
Depress the 1 $rf 1 button. 
l Recall dial tone is heard. 
Dial the destination number. 
l Ringback tone is heard. 
If busy tone is heard or the party does not answer, 
depress the, Xfer Conf button to return to the held party. 
When an outside party requests to be transferred to 
an extension and the extension is busy, the internal 
Call Queuing - Standby feature...

SATURN EPABX 
JR-DYAD User instructions A30808-X5051-C150-l-6919 
Issue 1, June 1985 
SECTION 3.00 JR-DYAD PROGRAMMABLE BUTTONS 
The remaining eight buttons, which have visual indicators, 
are system programmable for each station for feature activa- tion or line appearances. Their operation is discussed in Sec- 
tions 4.00 through 14.00. 
3-1 (3-2 blank)  

SATURN EPABX A30808-X5051-C150-l-B919 
JR-DYAD User Instructions Issue 1. June 1985 
SECTION 4.00 HOLD FEATURES 
4.01 Call Hold. This feature allows you to place any call (in- 
side or outside) on hold and hang up without losing the call. 
After holding the call, you may originate or receive other calls 
on the same extension line and return to the held call or al- 
ternate between the two calls (holding one call while speak- 
ing to the other). 
By using 
a. To 
1. 
2. 
3. the Call Hold feature button...

SATURN EPABX A30808-X5051-C150-l-B919 
JR-DYAD User Instructions issue 1, June 1985 
9 You are reconnected to the previously held 
party, and the other party, if any, is placed on 
hold. 
NOTE: If you accidentally hang up while a call is on hold, 
the call is automatically recalled (one burst alerting 
tone) to your JR-DYAD. To answer/return to the held 
call, pick up the handset. 
2. 
By using 
a. To 
1. 
2. 
3. 
4. 
b. To 
1. 
2. Resume your conversation. 
the Call Hold - Flip-Flop feature access code:...

SATURN EPABX 
JR-DYAD User Instructions A30808-X5051-C150-l-B919 
Issue 1, June 1985 
NOTES: 
l Line pickup lamp flutters. 
The line pickup lamp remains lighted at all other ap- 
pearances of the line. 
After depressing the HOLD EXCL button to hold a 
line, the same button can be used to hold another 
line without losing the previously held call. As many 
lines can be held as there are lines on your JR-DYAD. 
You are not allowed to hold an attendant. Addition- 
ally, if a party has bridged on a line,...

----_-__ - -- --. . SECTION 5.00 CALL TRANSFER FEATURES 
5.01 Call Transfer to Attendant. This feature allows you to 
transfer a call in progress to the attendant. 
a. To transfer a call to the attendant: 
1. First, ask the other party to wait. 
2. Depress the m 
feature button. NOTE: If you desire to transfer the call before the attendant 
answers, hang up. The held party will hear ringback 
tone until the attendant answers. 
3. When the attendant answers, announce the call. 
l Ringback tone is removed....