Siemens Hicom 150h, Hipath Hg1500 Service Manual

HiPath HG 1500 boards Installation
For internal use only
 A31003-K5020-S100-6-7620
2-16Service Manual lan2de.c02 

Initial startup of HiPath HG 1500
lan2de.c03
A31003-K5020-S100-6-7620 
Service Manual
3-1
For internal use onlyStartup
3 Startup
3.1 Initial startup of HiPath HG 1500
Note
Windows 3.11 is no longer supported.
3.1.1 Initial startup: Remote via modem
Prerequisites
The feature is only available as of Hicom Rel. 3 SMR-E with Assistant Office P30300-
P1584-A1-02 and SMR-11 HG1500. Hicom must be configured for remote adminis-
tration and HiPath HG 1500 must be in the default state (default customer database)....

Initial startup of HiPath HG 1500 Startup
For internal use only
 A31003-K5020-S100-6-7620
3-2Service Manual lan2de.c03
Note
The CHAP user ID and password are identical to the first
 user name and password 
of the Hicom user group system administration (generally 31994/31994).
3.1.2 Startup via ARP
HiPath HG 1500 can be assigned an IP address using a static entry in the ARP table 
of the Administration PC.
Prerequisites
The network card with the TCP/IP protocol must function correctly. The Xpress @LAN...

Initial startup of HiPath HG 1500
lan2de.c03
A31003-K5020-S100-6-7620 
Service Manual
3-3
For internal use onlyStartup
3.1.3 Initial startup via the serial interface
Note
The serial interface should only be used for initial startup if this is not possible via a 
LAN port.
Prerequisite
The SLIP connection in the dial-up network must be installed separately from the op-
erating system.
Note
The SLIP configuration on the PC is described in detail in the Administration Docu-
ments Hicom 150 E Office for...

Initial startup of HiPath HG 1500 Startup
For internal use only
 A31003-K5020-S100-6-7620
3-4Service Manual lan2de.c03
3.2 Configuration for gatekeeper mode
Figure 3-1 Installation for gatekeeper mode
The following stations must be differentiated from the user’s viewpoint:
Group 1
: stations directly connected to the Hicom (Optisets, POT, CMI, ...), stations 
registered at HiPath HG 1500 (C55 Opti clients, vCAPI clients) and all trunk access-
es.
Group 2
: stations registered at the gatekeeper (H.323...

Initial startup of HiPath HG 1500
lan2de.c03
A31003-K5020-S100-6-7620 
Service Manual
3-5
For internal use onlyStartup
3.2.1 Configuration HiPath HG 1500 
3.2.2 Configuring the NGK 100 gatekeeper
Relevant options under Settings
 Step Task
1. Under Voice Clients -> Gatekeeper
:
Enter the IP address of the PC with the gatekeeper,
enable gatekeeper support and configure the prefix.
2. Under Voice Clients -> H.323 Clients
:
Configure the clients with a gatekeeper connection using IP address 
255.255.255.255....

Initial startup of HiPath HG 1500 Startup
For internal use only
 A31003-K5020-S100-6-7620
3-6Service Manual lan2de.c03
Configuring Services
Configuring neighbors
Note
Detailed configuration examples can be found in the Administration Manual for HiPath 
HG 1500 (A31003-K5020-B811-*-7619).Step Task
1. Press the Services
 button and then click Add
.
2. Under Description
, enter a description for the service, e.g. Hicom 150 E.
3. Under Prefix
, enter the correct code, which must match the HiPath HG 
1500...

Tracing with development trace
lan2de.c04
A31003-K5020-S100-6-7620
Service Manual
4-1
For internal use onlyAdministration
4 Administration
Information on status diagnostics for HiPath HG 1500 such as DSS, PPP, Firewall, 
HFA client, H.323, vCAPI, etc. is contained in the HiPath HG 1500 Administrator 
Manual under Customer trace.
4.1 Tracing with development trace
Development trace must be deactivated when HiPath HG 1500 is in operation.
You must contact Development if you have problems or queries...

Tracing with development trace Administration
For internal use only
 A31003-K5020-S100-6-7620
4-2Service Manual lan2de.c04 

Integrating various network topologies
lan2de.c05
A31003-K5020-S100-6-7620
Service Manual
5-1
For internal use onlyAdditional information
5 Additional information
5.1 Integrating various network topologies
HiPath HG 1500 is equipped with a 10/100 MB Autosense twisted-pair port. 
5.1.1 Star topology with hub (10/100 BaseT)
In the case of this network topology, a hub or switch is used as a central element. 
Each data terminal is connected to this via a separate twisted-pair cable (e.g. 10/100...