Sharp Xv Z201 Projector User Manual

-49
Adjustments and Settings
On-screen Display
Special Modes Adjust-
ment
Ordinarily, the type of input signal is detected
and the correct resolution mode is automati-
cally selected. However, for some signals, the
optimal resolution mode in “Special Modes”
on the “Fine Sync” menu screen may need
to be selected to match the computer display
mode.
Set the resolution by selecting “Special
Modes” in the “Fine Sync” menu on the
menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Note
•Avoid...

On-screen Display
-50
Adjusting the Computer and DVD/DTV Images
Auto Sync Adjustment
Used to automatically adjust a computer im-
age.
Select whether the image is to be synchro-
nized automatically when switching the sig-
nal with “ON” or “OFF”.
Select “Auto Sync” in the “Fine Sync”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Note
•When the optimum image cannot be
achieved with Auto Sync adjustment, use
manual adjustments. (See page 48.)
•The Auto Sync adjustment may take...

-51
Adjustments and Settings
Using the “Options” Menu
Remaining lamp life
100%        5%
Approx. Approx.
4,000 hours 200 hours
Approx. Approx.
3,000 hours 150 hours
Lamp usage condition
Operated exclusively
in Eco mode ( )
Operated exclusively
in Standard mode
 ()
Checking the Lamp Life
Status
You can confirm the cumulative lamp usage
time and the remaining lamp life (percentage).
Display the “Options” menu to check
the lamp life status.
➝For operating the menu screen, see
pages 38 to 41.
Note
•It is...

-52
Using the “Options” Menu
-52
Selecting the Signal
Type
This function allows you to select the input
signal type Component or RGB for INPUT 2.
Select “Signal Type” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Note
•“RGB” or “Component” can be selected
with 
 on the remote control only in
INPUT 2.
Setting the Video Signal
(VIDEO menu only)
The video input system mode is preset to
“Auto”; however, it can be changed to a spe-
cific system mode if the...

-53
Adjustments and Settings
Selecting a
Background Image
This function allows you to select the image
displayed when no signal is being sent to the
projector.
Select “Background” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Setting the Eco Mode
This function allows you to select the desired
power consumption mode.
Select “Eco Mode” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Note
•Although lamp life and...

-54-54
Using the “Options” Menu
Center
UpperRight
Lower
Right
Upper
Left
Lower
Left
Selected Item
The menu is displayed on the
center of the image.
The menu is displayed on the
upper right of the image.
The menu is displayed on the
lower right of the image.
The menu is displayed on the
upper left of the image.
The menu is displayed on the
lower left of the image.
Description
Automatic Power Shut-
off Function
When no input signal is detected for more than
15 minutes, the projector will automatically en-...

-55
Adjustments and Settings
Selecting the Menu
Colour
This function allows you to select the colour
of the menu screen.
Select “Menu Color” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.On-screen Display
The menu is displayed
opaquely.
The menu is displayed
translucently. The part of the
menu on the image becomes
transparent.
 (Opaque)
(Translucent)
Selected ItemDescription
XV_Z201E_E_p51_56.p6503.10.30, 12:18AM 55 

-56
This projector is equipped with a reverse/invert image function that allows you to reverse or
invert the projected image for various applications.
Setting the Projection
Mode
Display the “PRJ Mode” menu and se-
lect the desired projection mode.
➝For operating the menu screen, see
pages 38 to 41.
Note
•This function is used for the reversed im-
age and ceiling-mount setups. See page 28
for these setups.
On-screen Display
Normal image
Inverted image
Reversed image
Reversed and inverted image
 Front...

Appendix
Appendix
XV_Z201E_E_p57_66.p6503.10.30, 12:19AM 57 

-58
Maintenance Indicators

The warning lights on the projector indicate problems inside the projector.

If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate
red, and the projector will enter the standby mode. After the projector has entered the standby
mode, follow the procedures given below.
TEMPERATURE
WARNING
indicatorPOWER
indicator LAMP
indicator
TEMP. LAMP POWER
About the temperature warning indicator
If the temperature inside the
projector increases,...