Sharp Xv Z10e Projector User Manual

Adjustments and Settings
-39
3Press 
' '' '
' or 
" "" "
" to select the item
you want to set.
Note
•Press  or \ to return to the previ-
ous screen.
4Press 
| || |
|.
•The cursor shifts to the sub menu.
•For some items, the sub menu cannot be
displayed. In such cases, select the icon us-
ing \ or | to make a setting, then go to
step 7.
Sub menu
Select the
item.
5Press 
' '' '
' or 
" "" "
" to select the
setting of the item...

-40
The following shows the items that can be set in the projector.
+30 −30
+30 −30
+30 −30
+30 −30
+30 −30
+30 −30
+30 −30
Main menu Sub menu
Contrast
Bright
Color
Tint
Sharp
Red
Blue
Reset
CLR Temp
Gamma
Signal Type
Picture SettingRGB
Component 5500K
6500K
7500K
8500K
9300K
10500K
Standard
Cinema1
Cinema2
Brighten
Memory 1
Memory OFFMemory 5 Picture
Page 42
Page 42
Page 43
Page 43
Page 44
Page 44
+15 −15
+30 −30
+30 −30
+30 −30
Fine Sync
Clock
Phase
H-Pos
V-Pos
Reset
Special Modes
Auto Sync [ON/OFF]...

-41
Adjustments and Settings
Main menu Sub menu
Options
OSD Display [ON/OFF]
Background [Blue/None]
Eco Mode [Eco/Standard]
Auto Power Off
 [ON/OFF]
Menu Position
Center
Upper Right
Lower Right
Upper Left
Lower Left
Menu Color
[Opaque/Translucent]Lamp Timer (Life)
Video SystemAuto
PAL
NTSC3.58
SECAM
NTSC4.43
PAL-M
PAL-N
PAL-60
Page 47Page 47
Page 47
Page 48
Page 48
Page 49
Page 49
Page 50
Page 50
Note
When using the INPUT 1 mode:
•The “Video System” item does not appear in the “Options” menu.
When using...

-42
Adjusting the Image
Note
•Select the memory location (Memory 1 to 5, or
Memory OFF) first when you want to store the
adjustment settings on the “Picture” menu. (See
page 44.)
Select the item on the “Picture” menu and
adjust the image.
Adjusting the menu screen  Page 36
Example: “Picture” screen menu for
INPUT 1 (Component) mode
Picture Adjustment
Info
•“Color”, “Tint” and “Sharp” are not displayed
when selecting INPUT 1 and setting the “Sig-
nal Type” to “RGB”.
•“Tint” cannot be adjusted and “Sharp”...

-43
Adjustments and Settings
 Gamma (Gamma Correction)
Gamma is an image quality enhancement function
that offers a richer image by brightening the darker
portions of the image without altering the bright-
ness of the brighter portions.
When you are displaying images with frequent dark
scenes, such as a film or concert, or when you are
displaying images in a bright room, this feature
makes the dark scenes easier to see and gives the
impression of greater depth in the image.
Select “Gamma” on the...

-44
Picture Setting (Storing and
Selecting the Adjustment Settings)
Use this function to store the adjustment settings on
the “Picture” menu. No matter which input mode or
signal type is selected, you can select and apply the
settings you have stored in a memory location.
Select “Picture Setting” on the “Picture” menu and the
memory location where you want to store the settings.
Then adjust the setting items on the “Picture” menu.
Setting the menu screen  Page 38
Example:“Picture” screen menu for
INPUT 1...

-45
Adjustments and Settings
Computer Image Adjustment
Note
•You can automatically adjust the computer im-
age by setting “Auto Sync” to “
” (ON) on the
“Fine Sync” menu or pressing 
 on the re-
mote control. See the next page for details.
•To reset all adjustment items, select “Reset” and
press 
.
•“Clock” and “Phase” cannot be adjusted when
“Signal Type” is set to “Component”.
Description of Adjustment Items
Using the “Fine Sync” menu, you can adjust the computer image, match the computer dis-
play...

-46
Note
•Auto Sync adjustment is also performed by
pressing 
 on the remote control.
•The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
•When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page 45.)
•Auto Sync adjustment is performed when “Sig-
nal Type” is set to “RGB”.
Computer Image Adjustment
Description of Auto Sync Adjustment
Signal Info (Checking the
Input Signal)
Select...

-47
Adjustments and Settings
OSD Display (Setting On-
screen Display)
This function allows you to turn the on-screen
messages on or off.
Select “” (ON) or “” (OFF) in “OSD
Display” on the “Options” menu.
Setting the menu screen  Page 38
Example:“Options” menu screen for
INPUT 2 (S-Video) mode
Lamp Timer (Life) (Check-
ing the Lamp Life Status)
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Display the “Options” menu to check the
lamp life status.
Checking the...

-48
Background (Selecting a
Startup and Background Image)
Select “Background” on the “Options” menu
and the image displayed upon the
projector’s startup and when no signal is
being sent to the projector.
Setting the menu screen  Page 38
Example:“Options” menu screen for
INPUT 2 (S-Video) mode
Video System (Setting the
Video System)
The video input system mode is preset to “Auto”;
however, a clear picture from the connected au-
dio-visual equipment may not be received, de-
pending on the video signal...