Sharp Xv Z10e Projector User Manual
Here you can view all the pages of manual Sharp Xv Z10e Projector User Manual. The Sharp manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
XV-Z10E Printed on 100% post-consumer recycled paper. Gedruckt auf 100% wiederverwertungs Papier. Imprimé sur 100% de papier recyclé. Utskrift på återvunnet papper av 100% återvunnet material. Impreso en 100% de papel reciclado de postconsumo. Stampato su carta riciclata al 100%. Gedrukt op 100% kringlooppapier. ENGLISH .............-1 –-68 DEUTSCH ............ -1 –-68 FRANÇAIS ........... -1 –-68 SVENSKA ............ -1 –-68 ESPAÑOL ............ -1 –-68 ITALIANO ............. -1 –-68 NEDERLANDS .... -1...
Page 2
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 5A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible...
Page 3
Introduction -1 Before using the projector, please read this operation manual carefully. WARNING:Intense light source. Do not look into the beam or view it directly. Be especially careful that children do not look directly into the beam. WARNING:To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION: To reduce the risk of electric shock, do not remove cabinet. No user-serviceable parts are inside. Refer servicing to qualified service personnel....
Page 4
-2 PRECAUTIONS A OBSERVER LORS DU REMPLACEMENT DE LA LAMPE. LAMP REPLACEMENT CAUTIONBEFORE REMOVING THE SCREW, DISCONNECT POWER CORD. HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE REPLACING THE LAMP. REPLACE WITH SAME SHARP LAMP UNIT TYPE BQC-PGB10S//1 ONLY. UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING. HIGH PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL. DEBRANCHER LE CORDON D’ALIMENTATION...
Page 5
Introduction -3 -36 The menu screens allow you to adjust the image and various projector settings. (The menu items differ depending on the input mode.) The menu can be operated with the projector or with the remote control. Using the Menu Screen Menu Selections(Adjustments) 1Press . Note•The “Picture” menu screen for the se- lected input mode is displayed. ', ", \, | buttonsMENU button UNDO button ENTER button ENTER button MENU button ', ", \, | buttons How to Read this Operation Manual...
Page 6
-4 Contents Introduction How to Read this Operation Manual ....................... 3 Contents ................................................................... 4 IMPORTANT SAFEGUARDS .................................... 5 Quick Reference ....................................................... 8 Part Names ............................................................. 10 Accessories ............................................................ 14 Using the Remote Control...
Page 7
Introduction -5 1. Read InstructionsAll the safety and operating instructions should be read before the product is operated. 2. Retain InstructionsThe safety and operating instructions should be retained for future reference. 3. Heed WarningsAll warnings on the product and in the operating instructions should be adhered to. 4. Follow InstructionsAll operating and use instructions should be followed. 5. CleaningUnplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol...
Page 8
-6•Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. •PC/AT is a registered trademark of International Business Machines Corporation in the United States. •Macintosh is a registered trademark of Apple Computer, Inc. in the United States and/or other countries. •All other company or product names are trademarks or registered trademarks of their respective compa- nies. XV_Z10E_E_p01_07.p6503.11.7, 4:13 PM 6
Page 9
Introduction -7 Be sure to read the following safeguards when setting up your projector. Caution concerning the lamp unitPotential hazard of glass particles if lamp ruptures. In case of lamp rupture, con- tact your nearest Sharp Authorised Pro- jector Dealer or Service Centre for a re- placement. See “Replacing the Lamp” on page 54. Caution concerning the setup of the projectorFor minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed in an area free...
Page 10
-8 Page 16 1.Place the projector facing a wall or a screen Pages 20, 21 2.Connect the projector to the video equipment and plug the power cord into the AC socket of the projector 3.Turn the projector on When connecting other devices, see pages 12, 22, 23, 24 and 25. This section introduces the quick reference for using the projector. Refer to the page for details on each procedure. Setup and Projection Connection of the projector and the video equipment with an S-video terminal is explained as an example...