Sharp Xr 32s Projector User Manual

							57
Appendix
Info
•When controlling the projector using RS-232C commands from a computer, wait for at least 30
seconds after the power has been turned on, and then transmit the commands.
•After sending an input selection or picture adjustment command and then receiving an “OK” re-
sponse code, the projector may take some time to process the command. If a second command is
sent while the projector is still processing the first command, you may receive an “ERR” response
code. If this happens, try resending the second command.
•When more than one code is being sent, send each command only after the response code for the
previous command from the projector is verified.
•“POWR????” “TABN _ _ _ 1” “TLPS _ _ _ 1” “TPOW _ _ _ 1” “TLPN _ _ _ 1” “TLTT _ _ _ 1”
“TLTM _ _ _ 1” “TLTL _ _ _ 1” “TNAM _ _ _ 1” “MNRD _ _ _ 1” “PJN0 _ _ _ 1”
- When the projector receives the special commands shown above:
* The on-screen display will not disappear.
* The “Auto Power Off” timer will not be reset.
- The special commands are available for applications that require continuous polling.
Computer control
A computer can be used to control the projector by connecting an RS-232C serial control
cable (cross type, commercially available) to the projector. (See page 24 for connection.)
Communication conditions
Set the serial port settings of the computer to match that of the table.
Signal format: Conforms to RS-232C standard. Parity bit: None
Baud rate*: 9,600 bps / 115,200 bps Stop bit: 1 bit
Data length: 8 bits Flow control: None
*Set the projector’s baud rate to the same rate as used by the computer.
Basic format
Commands from the computer are sent in the following order: command, parameter, and
return code. After the projector processes the command from the computer, it sends a re-
sponse code to the computer.
RS-232C Specifications and Commands
Return code (0DH)C1    C2    C3   C4    P1    P2    P3    P4
Response code format
Normal responseProblem response (communication error or incorrect command)
O      K E      R      R
Command 4-digitParameter 4-digit Command format
Return code (0DH)Return code (0DH)
•If an underbar (_) appears in the parameter column, enter a space.
•If an asterisk (*) appears in the parameter column, enter a value in the range indicated in brackets
under Control Contents.
*1 For setting the projector name, send the commands in the order of PJN1, PJN2 and PJN3.
*2 This command should be sent only after the “IRGB _ _ _ 2” command is sent and an “OK” response
code is received.
*3 The Lamp Timer Reset command is available only in standby mode.
Note 
						

							58
Computer
DVINormal
Stretch
Dot By Dot
Full
Border
Area Zoom
V-Stretch
Normal
Stretch
Dot By Dot
Full
Border
Area Zoom
V-Stretch
CONTROL CONTENTS
Power ONStandby mode
(or 30-second startup time)COMMAND
PARAMETERRETURN
Power
Projector Condition
Lamp
Name
Input Change
Volume
Keystone
AV Mute
Freeze
Auto Sync
ResizeOn
Off
Status
Status
Power Status
Quantity
Usage Time(Hour)
Usage Time(Minute)
Life(Percentage)
Model Name Check
Model Name Check
Projector Name Setting 1
(First 4 characters) *1
Projector Name Setting 2
(Middle 4 characters) *1
Projector Name Setting 3
(Last 4 characters) *1
Projector Name Check
Computer
DVI
    DVI-D-Computer select *2
    DVI-D-Video select *2
    DVI-Analog select *2
S-Video
Video
Input RGB Check
Input Video Check
Input Mode Check
Input Check
            
            
            
Volume(0 – 60)
Volume up/down(-10 – +10)
-80 – +80 (XGA)/-40 – +40 (SVGA)
On
Off
On
Off
StartOK
OK or ERR
0
0: Normal
1: Temp High
2: Fan Error
4: Cover Open
8: Lamp Life 5% or less
16: Lamp Burn-out
32: Lamp Ignition Failure
64: Temp Abnormally High
0:Off, 4:Lamp Error
0:Standby
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR OK or ERR
OK
1
0: Normal
1: Temp High
8: Lamp Life 5% or less
16: Lamp Burn-out
32: Lamp Ignition Failure
0:Off, 1:On, 2:Retry
3:Waiting, 4:Lamp Error
1:On, 2:Cooling 
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
1: Computer, 2: DVI (XR-32X only) or ERR1: S-Video, 2: Video or ERR1: RGB, 2: Video
1: Computer
2: DVI (XR-32X only)
3: S-Video
4: Video
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR P
P
P
T
T
T
T
T
T
T
T
M
P
P
P
P
I
I
I
I
I
I
I
I
I
I
I
V
V
K
I
I
F
F
A
R
R
R
R
R
R
R
R
R
R
R
R
R
RO
O
O
A
L
P
L
L
L
L
N
N
J
J
J
J
R
R
B
B
B
V
V
R
V
M
C
O
O
E
M
M
R
R
D
A
A
A
A
A
A
A
B
B
B
B
B
B
BW
W
W
B
P
O
P
T
T
T
A
R
N
N
N
N
G
G
D
D
D
E
E
G
E
O
H
L
U
Y
B
B
E
E
J
S
S
S
S
S
S
S
S
S
S
S
S
S
SR
R
R
N
S
W
N
T
M
L
M
D
1
2
3
0
B
B
S
S
S
D
D
B
D
D
K
A
D
S
K
K
Z
Z
S
R
R
R
R
R
R
R
R
R
R
R
R
R
R_
_
?
_
_
_
_
_
_
_
_
_
*
*
*
_
_
_
_
_
_
_
_
?
?
?
?
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
__
_
?
_
_
_
_
_
_
_
_
_
*
*
*
_
_
_
_
_
_
_
_
?
?
?
?
_
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
__
_
?
_
_
_
_
_
_
_
_
_
*
*
*
_
_
_
_
_
_
_
_
?
?
?
?
*
*
*
_
_
_
_
_
_
_
_
_
_
1
1
_
_
_
_
_
1
11
0
?
1
1
1
1
1
1
1
1
1
*
*
*
1
1
2
1
2
3
1
2
?
?
?
?
*
*
*
1
0
1
0
1
1
2
3
5
6
0
1
1
2
3
5
6
0
11
0 – 9999(Integer)
0, 15, 30, 45
0% – 100%(Integer)
XR32X/XR32S
XR-32X/XR-32S
OK or ERR
OK or ERR
OK or ERR
Projector Name
Commands
Example: When turning on the projector, make the following setting.
→
←POWR _ 1__OK
Projector Computer
      is only for XR-32X.
RS-232C Specifications and Commands (Continued) 
						

							59
Appendix
CONTROL CONTENTS
Power ONStandby mode
(or 30-second startup time)COMMAND
PARAMETERRETURN
Resize
ALL Reset
Computer INPUT
DVI INPUTOK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERRERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR R
R
R
R
R
R
R
R
R
R
A
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
I
I
I
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
I
I
I
R
R
H
H
HA
A
A
A
A
B
B
B
B
B
L
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
M
M
MS
S
S
S
S
S
S
S
S
S
R
P
P
P
P
P
P
B
R
B
C
T
S
C
W
I
I
I
N
N
N
R
S
S
S
A
A
P
P
P
P
P
P
B
R
B
C
T
S
C
W
I
I
I
N
N
N
R
S
S
S
A
A
B
B
BV
V
V
V
V
V
V
V
V
V
E
S
S
S
S
S
I
R
D
E
O
I
H
T
E
P
P
P
R
R
R
E
I
I
I
I
I
S
S
S
S
S
I
R
D
E
O
I
H
T
E
P
P
P
R
R
R
E
I
I
I
I
I
D
D
D_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
__
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
__
_
_
1
1
_
_
_
1
1
_
1
1
1
1
1
*
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
1
1
1
1
1
*
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_1
2
3
0
1
1
2
3
0
1
1
0
1
2
3
4
*
*
*
*
*
*
*
*
*
0
1
2
0
1
2
1
0
1
2
1
2
0
1
2
3
4
*
*
*
*
*
*
*
*
*
0
1
2
0
1
2
1
0
1
2
1
2
0
1
2 S-Video
Video
Picture Mode
Contrast
Bright
Red
Blue
Color
Tint
Sharp
CLR Temp
Bright Boost
Progressive
DNR
Picture Reset
Signal Type
Audio Input
Picture Mode
Contrast
Bright
Red
Blue
Color
Tint
Sharp
CLR Temp
Bright Boost
Progressive
DNR
Picture Reset
Signal Type
Audio Input
Dynamic Range
Normal
Stretch
Border
Area Zoom
V-Stretch
Normal
Stretch
Border
Area Zoom
V-Stretch
Standard
Presentation
Movie
Game
sRGB
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-1 – +1
0 – +2
2D Progressive
3D Progressive
Film Mode
Off
Level 1
Level 2
Auto
RGB
Compontent
Audio 1
Audio 2
Standard
Presentation
Movie
Game
sRGB
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-1 – +1
0 – +2
2D Progressive
3D Progressive
Film Mode
Off
Level 1
Level 2
Auto
RGB
Compontent
Audio 1
Audio 2
Auto
Standard
Enhanced
      is only for XR-32X. 
						

							60
CONTROL CONTENTS
Power ONStandby mode
(or 30-second startup time)COMMAND
PARAMETERRETURN
S-Video INPUT
Video INPUT
C.M.S. Setting
C.M.S.
Clock
Phase
H-position
V-position
Fine Sync Adjustment ResetOK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERRERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
I
I
I
I
IA
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
N
N
A
A
AP
P
P
P
P
B
R
B
C
T
S
C
W
I
I
I
N
N
N
R
A
A
P
P
P
P
P
B
R
B
C
T
S
C
W
I
I
I
N
N
N
R
A
A
C
C
H
H
H
H
H
H
R
S
S
S
S
S
S
R
V
V
V
V
V
V
R
R
C
P
H
V
RS
S
S
S
I
R
D
E
O
I
H
T
E
P
P
P
R
R
R
E
I
I
S
S
S
S
I
R
D
E
O
I
H
T
E
P
P
P
R
R
R
E
I
I
S
S
R
Y
G
C
B
M
E
R
Y
G
C
B
M
E
R
Y
G
C
B
M
E
E
L
H
P
P
E_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
_
*
_
__
_
_
_
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
_
*
*
*
*
*
*
_
*
*
*
*
*
*
_
_
*
*
*
*
_1
1
1
1
*
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
1
1
1
1
*
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
1
0
*
*
*
*
*
*
_
*
*
*
*
*
*
_
*
*
*
*
*
*
_
_
*
*
*
*
_0
1
2
3
*
*
*
*
*
*
*
*
*
0
1
2
0
1
2
1
1
2
0
1
2
3
*
*
*
*
*
*
*
*
*
0
1
2
0
1
2
1
1
2
1
0
*
*
*
*
*
*
2
*
*
*
*
*
*
3
*
*
*
*
*
*
4
1
*
*
*
*
1 Picture Mode
Contrast
Bright
Red
Blue
Color
Tint
Sharp
CLR Temp
Bright Boost
Progressive
DNR
Picture Reset
Audio Input
Picture Mode
Contrast
Bright
Red
Blue
Color
Tint
Sharp
CLR Temp
Bright Boost
Progressive
DNR
Picture Reset
Audio Input
On
Off
Hue     
     
     
     
     
     
     
Saturation     
     
     
     
     
     
     
Value
C.M.S. All Reset
-150 – +150
-30 – +30
-150 – +150
-60 – +60Standard
Presentation
Movie
Game
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-1 – +1
0 – +2
2D Progressive
3D Progressive
Film Mode
Off
Level 1
Level 2
Audio 1
Audio 2
Standard
Presentation
Movie
Game
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-30 – +30
-1 – +1
0 – +2
2D Progressive
3D Progressive
Film Mode
Off
Level 1
Level 2
Audio 1
Audio 2
Red      
Yellow      
Green      
Cyan      
Blue      
Magenta      
Reset      
Red      
Yellow      
Green      
Cyan      
Blue      
Magenta      
Reset      
Red      
Yellow      
Green      
Cyan      
Blue      
Magenta      
Reset      
RS-232C Specifications and Commands (Continued)
      is only for XR-32X. 
						

							61
Appendix
CONTROL CONTENTS
Power ONStandby mode
(or 30-second startup time)COMMAND
PARAMETERRETURN
Image Shift
OSD Display 
Closed Caption
Video System
Background 
Lamp Setting
Auto Sync 
Auto Power Off 
Auto Restart
STANDBY Mode
PRJ Mode
Language
Setup Guide
System Sound
Internal Speaker
RGB Frequency 
Check
Fan Mode
Lamp Timer Reset *3-96 – +96 (XGA)/-75 – +75 (SVGA)
On
Off
Off
CC1
CC2
Auto
PAL
SECAM
NTSC4.43
NTSC3.58
PAL-M
PAL-N
PAL-60
Logo
Blue
None
Bright
Eco + Quiet
On
Off
On
Off
On
Off
Standard
Eco
Reverse
Invert
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
 
Português
 
  
polski
Türkçe
Magyer
On
Off
On
Off
On
Off
Horizontal
Vertical
Normal
HighOK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
OK or ERR
kHz(***.* or ERR)
Hz(***.* or ERR)
OK or ERR
OK or ERR
ERRERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
ERR
OK or ERR L
I
I
C
C
C
M
M
M
M
M
M
M
M
I
I
I
T
T
A
A
A
A
A
A
M
M
I
I
I
I
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
S
S
S
S
A
A
T
T
H
H
LN
M
M
L
L
L
E
E
E
E
E
E
E
E
M
M
M
H
H
A
A
P
P
R
R
O
O
M
M
M
M
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
S
S
S
S
F
F
L
L
PD
D
D
C
C
C
S
S
S
S
S
S
S
S
B
B
B
M
M
D
D
O
O
E
E
U
U
R
R
I
I
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
G
G
N
N
P
P
R
R
M
M
RS
I
I
A
A
A
Y
Y
Y
Y
Y
Y
Y
Y
G
G
G
D
D
J
J
W
W
S
S
T
T
E
E
N
N
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
U
U
D
D
K
K
Q
Q
D
D
E_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
0*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
0*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
1
1
1
1
1
1
1
1
_
_
_
_
_
_
_
_
_
_
0*
1
0
0
1
2
1
2
3
4
5
6
7
8
1
3
4
0
1
1
0
1
0
1
0
1
0
1
0
1
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
1
0
1
0
1
0
1
2
0
1
1 On
Off
On
Off 
						

							62
Computer
Computer Compatibility Chart
•Multiple signal support
Horizontal Frequency: 15-70 kHz,
Vertical Frequency: 45-85 Hz,
The following is a list of modes that conform to VESA. However, this projector supports other
signals that are not VESA standards.
27.0
31.5
37.5
27.0
31.5
37.9
27.0
31.5
27.0
31.5
37.9
26.2
31.5
34.7
37.9
37.5
43.3
31.4
35.2
37.9
46.6
48.1
46.9
53.7
40.3
48.4
56.5
60.0
68.7
45.0
47.8
49.7
62.8
47.7
47.8
55.0
66.2
67.5
64.0
64.0
34.9
49.7
60.2
68.760
70
85
60
70
85
60
70
60
70
85
50
60
70
72
75
85
50
56
60
70
72
75
85
50
60
70
75
85
60
60
60
75
60
60
60
70
75
60
60
67
75
75
75 640 × 350
640 × 400
720 × 350
720 × 400
640 × 480
800 × 600
1024 × 768
1280 × 720
1280 × 768
1280 × 800
1280 × 800
1360 × 768
1366 × 768
1152 × 864
1280 × 1024
1400 × 1050
640 × 480
832 × 624
1024 × 768
1152 × 870 MAC 13
MAC 16
PC
VGA
SVGA
XGA
WXGA
SXGA
SXGA+
VGA
SVGA
XGA
SXGA
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔✔
✔
PC/MAC
Intelligent CompressionMAC 19
MAC 21
ResolutionHorizontal Frequency
(kHz)Vertical Frequency
(Hz)VESA Standard* DVI-D
SupportDisplay
Upscale
True
Intelligent
Compression
Upscale
True
* XR-32X only
Pixel Clock: 12-108 MHz
Sync signal: Compatible with TTL level
•Compatible with sync on green signal
•When this projector receives 640K350 VESA format VGA signals, “640 × 400” appears on the screen.
•Optimum image quality will be achieved by matching your computer’s output resolution to the reso-
lution that corresponds to “True” in the “Display” column shown above.
Note
DTVSignal480I480P540P576I576P720P720P1035I1080I1080I
Horizontal Frequency (kHz)15.731.533.815.631.337.545.033.828.133.8
Vertical Frequency  (Hz)60606050505060605060
✔
✔✔✔✔✔✔* XR-32X only
* DVI-D Support (Compatible with HDCP) 
						

							63
Appendix
ProblemCheck•Projector power cord is not plugged into the wall outlet.•Power to the external connected devices is off.•The selected input mode is wrong.•Cables are incorrectly connected to the projector.•Remote control battery has run out.•External output has not been set when connecting notebook computer.•The lamp unit cover is not installed correctly.
•XR-32X only: If the connected DVI digital equipment is tur ned on
before the “DVI-D” input mode is selected on the projector, the image
may not be projected properly or may not be displayed at all. Ensure
that the appropriate input mode has been selected on the projector
before you turn on the connected equipment.•Cables are incorrectly connected to the projector.•“Bright” is set to minimum position.
•Depending on the computer you are using, an image may not be
projected unless Xthe signal output setting of the computer is
switched to the external output. Refer to the computer’s operation
manual for how to switch its signal output settings.
•Image adjustments are incorrectly set.
•Make adjustments of “Color” and “Tint” in “Picture Mode” and lower
the “Bright Boost” value.
(Video Input only)
•Video input system is incorrectly set.
•Adjust the focus.•The projection distance exceeds the focus range.
•There is fog on the lens. If the projector is carried from a cold room into a
warm room, or if it is suddenly heated, condensation may form on the
surface of the lens and the image will become blurred. Set up the
projector at least one hour before it is to be used. If condensation should
form, remove the power cord from the wall outlet and wait for it to clear.(Computer Input only)
•Perform “Fine Sync” Adjustments (“Clock” Adjustment)
•Perform “Fine Sync” Adjustments (“Phase” Adjustment)
•Noise may appear depending on the computer.
•Cables are incorrectly connected to the projector.
•Volume is set to minimum.
•When the projector is connected to an external device and the
volume is set to minimum, the sound is not output even if you turn up
the volume of the external device.
•“Speaker” is set to “Off”.
•Select “Data image is not centered” in the “Help” menu and make thenecessary adjustments.
•Depending on the computer you are using, the output resolution
signal may be different from the one you have set. For details, refer to
the operation manual of the computer.
Page24–2921–24142153, 54
21
21–2441
–
41
48
2620
–
48
48
–
21–24
29
45
48
–
Color is faded or poor.
Picture appears but no
sound is heard. Picture is blurred;
noise appears. Sound is heard but no
picture appears
(or picture is dark). No picture and no sound
or projector does not
start.
Data image is not
centered.
Troubleshooting 
						

							64
Problem
An unusual sound is
occasionally heard from
the cabinet.
Maintenance indicator on
the projector illuminates
or blinks in red.
The projector cannot
be turned on or put into
the standby mode
using STANDBY/ON on
the projector.
Picture is green on
COMPUTER
(Component)/
*DVI (Component).
Picture is pink
(no green) on
COMPUTER (RGB)/
*DVI (RGB).
Picture is too bright and
whitish.
The cooling fan becomes
noisy.
The lamp does not light
up even after the
projector turns on.
The lamp suddenly turns
off during projection.
The image sometimes
flickers.
The lamp needs muchtime to turn on.
Picture is dark.
The remote control
cannot be used.
Check
•If the picture is normal, the sound is due to cabinet shrinkage caused
by room temperature changes. This will not affect operation or
performance.
•See “Maintenance Indicators”.
•The keylock is set.
If the keylock is set to “ON”, all the buttons are locked.
•Change the input signal type setting.
•When you cannot select an input signal type, select “Color is faded
or poor” in the “Help” menu, after selecting an item other than
“sRGB” in “Picture Mode”, and then select an input signal type.
•Image adjustments are incorrectly set.
•When temperature inside the projector increases, the cooling fanruns faster.
•The lamp indicator is illuminating in red.
Replace the lamp.
•Cables are incorrectly connected to the projector or the connected
equipment works improperly.
•Select “Vertical stripes or flickering image appear” in the “Help”
menu and make the necessary adjustments.
•If this happens frequently, replace the lamp.
•The lamp will eventually need to be changed.
While the remaining lamp life draws to a close, replace the lamp.
•Operate the remote control while pointing it at the projector’s remote
control sensor.
•The remote control may be too far away from the projector.
•If direct sunlight or a strong fluorescent lamp is shining on the
projector’s remote control sensor, place the projector where it will not
be affected by strong light.
•The batteries may be depleted or inserted incorrectly. Make sure the
batteries are inserted correctly or insert new ones.
Page
–
50
47
48
40, 48
41
8, 949, 50, 51
50, 53
21–24
48
53
53
15
14
This unit is equipped with a microprocessor. Its performance could be adversely affected by incorrect operation
or interference. If this should happen, unplug the Unit and plug it in again after more than 5 minutes.
Troubleshooting (Continued)
* XR-32X only 
						

							65
Appendix
For SHARP Assistance
If you encounter any problems during setup or operation of this projector, first
refer to the “Troubleshooting” section on pages 63 and  64. If this operation manual
does not answer your question, please contact the SHARP Service departments
listed below.
U .S.A. Sharp Electronics Corporation
1-888-GO-SHARP (1-888-467-4277)
[email protected]
http://www.sharpusa.com
Canada Sharp Electronics of Canada Ltd. (905) 568-7140
http://www.sharp.ca
Mexico Sharp Electronics Corporation Mexico Branch
(525) 716-9000
http://www.sharp.com.mx
Latin America Sharp Electronics Corp. Latin American Group
(305) 264-2277
[email protected]
http://www.siempresharp.com
Germany Sharp Electronics (Europe) GMBH 01805-234675
http://www.sharp.de
U .K. Sharp Electronics (U.K.) Ltd.
08705 274277
http://www.sharp.co.uk/customersuppor t
Italy Sharp Electronics (Italy) S.P.A.
(39) 02-89595-1
http://www.sharp.it
France Sharp Electronics France 01 49 90 35 40
[email protected]
http://www.sharp.fr
Spain Sharp Electronica Espana, S.A. 93 5819700
[email protected]
http://www.sharp.es
Switzerland Sharp Electronics (Schweiz) AG 0041 1 846 63 11
[email protected]
http://www.sharp.ch
Sweden Sharp Electronics ( Nordic ) AB (46) 8 6343600
[email protected]
http://www.sharp.se
A ustria Sharp Electronics (Europe) GMBH
Branch Office Austria
0043 1 727 19 123
[email protected]
http://www.sharp.at Benelux SHARP Electronics Benelux BV
0900-SHARPCE (0900-7427723)
Nederland
9900-0159 Belgium
http://www.sharp.nl
http://www.sharp.be
http://www.sharp.lu
A ustralia Sharp Corporation of Australia Pty.
Ltd.
1300-135-022
http://www.sharp.net.au
New Zealand Sharp Corporation of New Zealand (09) 634-2059, (09) 636-6972
http://www.sharp.net.nz
Singapore Sharp-Roxy Sales (S) Pte. Ltd. 65-226-6556
[email protected]
http://www.sharp.com.sg
Hong Kong Sharp-Roxy (HK) Ltd. (852) 2410-2623
[email protected]
http://www.sharp.com.hk
T aiwan Sharp Corporation (Taiwan)
0800-025111
http://www.sharp-scot.com.tw
Malaysia Sharp-Roxy Sales & Service Co. (60) 3-5125678
U .A.E. Sharp Middle East Fze
971-4-81-5311
[email protected]
Thailand Sharp Thebnakorn Co. Ltd. 02-236-0170
[email protected]
http://www.sharp-th.com
K orea Sharp Electronics Incorporated of
Korea
(82) 2-3660-2002
[email protected]
http://www.sharpkorea.co.kr
India Sharp Business Systems (India) Limited
(91) 11- 6431313
[email protected] 
						

							66
Specifications
As a part of policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specifica-
tion figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
Model
Display devices
Resolution
Lens
Input terminals
Output terminals
Control, others
Speakers
Projection lamp
Rated voltage
Rated frequency
Input current
Power consumption (Standby)
Operation temperature
Cabinet
Dimensions (main body only) [W × H × D]
Weight (approx.)F number
Zoom
Focus
DVI-D (Compatible with HDCP)
RGB/Component (mini D-sub 15 pin)S-Video (mini DIN 4 pin)
Video (RCA)
Audio (ø3.5 mm stereo minijack)
Audio (RCA)
RGB/Component (mini D-sub 15 pin)Audio (ø3.5 mm stereo minijack)
USB (Type B)
RS-232C (mini DIN 9 pin)
XR-32X XR-32S
0.55 DLP® Chip
XGA (1024×768) SVGA (800×600)
F 2.5 – 2.6
Manual, ×1.15 (f = 20.4 – 23.5 mm)
Manual
×1–
×1
×1
×1
×1–
×1 (L/R)
×1
×1 (variable audio output) –
×1
×1
2 W (Mono)
200 W
AC 100 – 240 V
50/60 Hz
2.9 A
267 W (5.0 W) with AC 100 V
259 W (5.7 W) with AC 240 V
41°F to 95°F (+5°C to +35°C)
Plastic
10 
41/64 × 3 33/64 × 10 7/16 
(270 (W) × 89 (H) × 265 (D) mm)
6.4 lbs. (2.9 kg)