Sharp Xr 32s Projector User Manual
Have a look at the manual Sharp Xr 32s Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
27 Basic Operation 3 Adjusting the Height The height of the projector can be ad- justed using the adjustment feet at the front and rear of the projector. When the screen is above the projec- tor, the projection image can be made higher by adjusting the projector. 1 2 3 •Do not apply too much pressure on the pro- jector when the front adjustment foot comes out. •When lowering the projector, be careful not to get your fingers caught in the area between the adjustment foot and the projector. • Hold the projector firmly while lifting or carrying.•Do not hold by the lens area. Use the rear adjustment foot to make the projector level. •The projector is adjustable ±2 degrees from the standard position. Remove your hands from the HEIGHT ADJUST lever of the pro- jector after its height has been finely adjusted. •The angle of projection is adjustable up to 9 degrees from the surface on which the projector is placed. Lift the projector to adjust its height while lifting the HEIGHT ADJUST lever. Info •When adjusting the height of the projector, trapezoidal distortion occurs. Follow the pro- cedures in Keystone Correction to correct the distortion. (See pages 28 and 43.) Note HEIGHT ADJUST lever Make small adjustments. Rear adjustment foot
28 0 KEYSTONEADJUST END Correcting Trapezoidal Distortion When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction. •The Keystone Correction can be adjusted up to an angle of approximately ±40 degrees and the screen can also be set up to an angle of approximately ±40 degrees (when the resize mode is set to “NORMAL” (see page 30)). Note 1 2 3 Press KEYSTONE.•The on-screen display of the Keystone Correction mode will disappear. •You can also use KEYSTONE on the pro- jector. Press P/Q or O/R to adjust the Keystone Correction. •You can also adjust the Keystone Cor- rection using the adjustment buttons on the projector. Press KEYSTONE to enter the Keystone Correction mode. •You can also display the on-screen dis- play of the Keystone Correction mode with KEYSTONE on the projector. •To return to the default setting, press RETURN while the on-screen display of the Keystone Correction mode is on the screen. Note On-screen display (Keystone Correction mode) Shrinks upper side. (Move the slide bar in the + direction.) Shrinks lower side. (Move the slide bar in the - direction.) •While adjusting the image using Keystone Correction, straight lines and the edges of the image may appear jagged. Info KEYSTONE button Adjustment buttons (P/R/O/Q) RETURN button Image Projection (Continued)
29 Basic Operation Displaying the Black Screen and Turning off the Sound Temporarily Adjusting the Volume Switching the Input Mode Press COMPUTER, DVI (XR-32X only), S-VIDEO or VIDEO on the remote con- trol to select the input mode. •When you press INPUT on the projector or DVI on the remote control (XR-32X only), the INPUT list appears. Press P/R to switch the INPUT mode. Select the appropriate input mode for the connected equipment. Press VOL +/– on the remote control or –O/Q+ on the projector to adjust the vol- ume. •Pressing VOL–/–O will lower the volume. •Pressing VOL+/Q+ will raise the volume. •When the projector is connected to exter nal equipment, the volume level of the exter nal equip- ment changes in accordance with the volume level of the projector. Set the projector’s volume to the lowest level when tur ning the projector on/ off or when changing the input signal. •When you do not want to output the sound from the projector’s speaker while the projector is con- nected to external equipment, set “Speaker” in “PRJ-ADJ” menu to “Off”. (See page 45.) Press AV MUTE on the remote control to temporarily display a black screen and turn off the sound. •Pressing AV MUTE again will turn the pro- jected image back on. On-screen display Note Note On-screen displayVOL +/– (Volume) buttons COMPUTER, DVI (XR-32X only), S-VIDEO, VIDEO buttons AV MUTE button
30 Resize Mode This function allows you to modify or customize the resize mode to enhance the input image. De- pending on the input signal, you can choose a desired image. Press RESIZE.•See page 43 for setting on menu screen.RESIZE button COMPUTER For 4:3 screen For 16:9 screen Input signal 4:3 aspect ratio 5:4 aspect ratio 16:10 aspect ratio16:9 aspect ratio : Cutout area on which images cannot be projected : Area where the signals are off screen Computer Resolution lower than XGA XR-32X XR-32S XGA SVGAResolution lower than SVGA Resolution higher than XGAResolution higher than SVGA SXGA (1280 × 1024) 1280 × 720 1280 × 768 1280 × 800 1360 × 768 1366 × 768 STRETCH Image type NORMAL FULL BORDERDOT BY DOT *1 *1 *2*2 *2*2 *1, *3*1 *1*1 *1*2*3 The Image Shift function can be used for these images. Same as NORMAL mode. For XR-30S model, you cannot select BORDER when the resolution (1280 x 1024, etc.) that the horizontal ratio is smaller than 4:3 aspect ratio is selected. Image Projection (Continued) XR-32X XR-32S Main resolution SVGA (800 x 600) XGA (1024 x 768) SXGA (1152 x 864) 1280 x 800 SVGA (800 x 600) XGA (1024 x 768) SXGA (1152 x 864) 1280 x 800DOT BY DOT 800 x 600 1152 x 864 1280 x 800 1024 x 768 1152 x 864 1280 x 800BORDER 768 x 576 922 x 576 600 x 450 720 x 450STRETCH 1024 x 576 800 x 450 NORMAL 1024 x 768 1024 x 640 800 x 600 800 x 500FULL 1024 x 768 800 x 600
31 Basic Operation VIDEOVIDEO/DTV *1 *1 *1 *1 *1 *1 *1 *1 *2*2 4:3 aspect ratio Squeeze Letter box 16:9 aspect ratio 16:9 aspect ratio (4:3 aspect ratio in 16:9) For 4:3 screen For 16:9 screen Input signal Image type NORMAL Video/DTV 480I, 480P, 576I, 576P, NTSC, PAL, SECAM 720P, 1035I, 1080I 540P : Cutout area on which images cannot be projected : Area on which the image is not included in the original signals The Image Shift function can be used for these images. Same as NORMAL mode. BORDER STRETCH AREA ZOOMV-STRETCH *1*2 About Copyrights •When using the RESIZE function to select an image size with a different aspect ratio to a TV program or video image, the image will look different from its original appearance. Keep this in mind while choosing an image size. •The use of the Resize or Keystone Correction function to compress or stretch the image for commercial purposes/public displays in a café, hotel, etc. may be an infringement of copyright protected by law for copyright holders. Please use caution.
32 Operating with the Remote Control Displaying and Setting the Break Timer Press BREAK TIMER.•The timer starts to count down from 5 minutes.1 2 Press P/R/O/Q to adjust the length of the break time. •Increases with P or Q 5 minutes s 6 minutes s 60 minutes•Shortens with O or R4 minutes s 3 minutes s1 minute •The break time can be set in units of one minute (up to 60 minutes). On-screen display Canceling the break timer display function Press BREAK TIMER. •Break Timer does not function while the pro- jector is operating the “Auto Sync”, “FREEZE” or “AV MUTE” functions. Note Switching the Eco+Quiet Mode Press ECO+QUIET to switch the Eco+Quiet mode between on and off. •When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend. Press POINTER and press P/R/ O/Qon the remote control to move the pointer. •Press EFFECT to change the pointer icon (5 types). Displaying the Pointer Press SPOT and press P/R/O/Q on the remote control to move the spot area. •Press EFFECT to change the spot area size (3 types). Using the Spot Function 1 Press POINTER again.•The pointer will disappear.2 1 Press SPOT again.•The spot area will disappear.2 •Refer to “Lamp Setting” on page 42 for de- tails of the Eco+Quiet mode. Note POINTER button ECO+QUIET button Adjustment buttons (P/R/O/Q) BREAK TIMER button SPOT button AUTO SYNC button FREEZE button PICTURE MODE button MAGNIFY buttons EFFECT button
33 Useful Features Auto Sync (Auto Sync Adjustment) Freezing a Moving Image •When the optimum image cannot be achieved with Auto Sync adjustment, use the help menu for manual adjustments. (See page 48.) Auto Sync function works when detect- ing input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Press FREEZE. •The projected image is frozen. Press FREEZE again to return to the moving image from the cur- rently connected device. Note Selecting the Picture Mode Press PICTURE MODE.•When pressing PICTURE MODE, the picture mode changes in the following order: STANDARD PRESENTATIONMOVIE GAME sRGB You can select the appropriate picture mode for the projected image, such as movie or video game. •See page 40 for details on the picture mode. Note * *“sRGB” is displayed only when RGB signal is input. Displaying an Enlarged Portion of an Image Graphs, tables and other portions of projected images can be enlarged. This is helpful when providing more detailed explanations. 1 2 1 2 Press MAGNIFY on the remote control. •Enlarges the image. •Pressing or MAGNIFY enlarges or reduces the projected image. Note 1234 Press . Press. •You can change the location of the en- larged image using P, R, O and Q. Press RETURN on the remote con- trol to cancel the operation. •The magnification then returns to ×1. Note •The selectable magnifications differ de- pending on the input signal. •In the following cases, the image will return to the normal size (×1). -When switching the INPUT mode. -When RETURN has been pressed. -When the input signal is changed. -When the input signal resolution and refresh rate (vertical frequency) change. -When the Resize mode is changed. -When the Picture mode is changed. -When the Progressive mode is changed.
34
Using the Remote Control as the Wireless Computer Mouse
When connecting the projector and the computer with a USB cable, you can use
the remote control as the computer mouse.
If the computer is placed too far away from the projector to be connected via the
USB cable, the remote receiver (optional, AN-MR2) makes it possible to operate
the projector with the remote control. For details, see the operation manual of
the receiver.
Connecting with a USB cable
MOUSE/Adjustment
buttons ('/"/\/|)
R-CLICK button
L-CLICK button PAGE UP/
PAGE DOWN buttons
The mouse pointer can be oper-
ated in the following way after it
is connected.
■ When moving the cursorPress MOUSE/Adjustment buttons (P/R/O/Q).
■ When left-clicking Press L-CLICK.
■ When right-clicking Press R-CLICK.
■ When your computer supports only a
one-click mouse (such as Macintosh)
Press L-CLICK or R-CLICK.
L-CLICK and R-CLICK have common function.
■ When using [Page Up] or [Page Down]
•This function only works with the Microsoft® Windows® OS and Mac OS®. However, this function
does not work with the following operation systems that do not support USB.
• Versions earlier than Windows
® 95
• Versions earlier than Windows® NT4.0
• Versions earlier than Mac OS® 8.5
•You cannot use this function when displaying the menu screen.
•Confirm that the computer recognizes the USB connection.
Note
Same as the [Page Up] and [Page Down] keys on a computer keyboard.
Press PAGE UP or PAGE DOWN.
Operating with the Remote Control (Continued)
or
Remote receiver
(optional, AN-MR2)To USB terminal
USB cable
(commercially available or available as
Sharp service part QCNWGA014WJPZ)To USB terminalComputer
35 Useful Features The following shows the items that can be set in the projector. Menu Items Picture Mode Contrast 0 0 0 0 BrightColorTint0 Sharp Standard SEL./ADJ. ENTER END0 0 Red Blue PictureSCR - ADJ PRJ - ADJ Help Picture Mode CLR Temp Bright Boost C.M.S. Setting C.M.S.Standard SEL./ADJ. ENTER END Progressive Lamp Setting 0 1 On 3D Progressive Bright DNR Off Reset PictureSCR - ADJ PRJ - ADJ Help PAGE 2 Main menu Sub menuPicture Page 40Page 40 Page 41 Page 41 Page 41 Page 41 Page 41 Page 42 Page 42 +30 -30Contrast +30 -30 +30 -30 +30 -30 1 -1 2 0 +30 -30+30 -30+30 -30Tint Color Sharp Bright Progressive Lamp Setting Reset2D Progressive 3D Progressive Film Mode CLR Temp Bright Boost C.M.S. Setting [On/Off] C.M.S.Standard Presentation Movie Game sRGB*1 Picture Mode *2 *2 *2 Red Blue *2 Page 42 DNR Off Level 1 Level 2 Bright Eco + Quiet C.M.S.-Hue C.M.S.-Saturation C.M.S.-Value Page 41 Page 41 Page 41Reset+30 -30 R +30 -30 +30 -30 +30 -30+30 -30+30 -30C G B Y M Reset *1 Items when inputting RGB signal through COMPUTER or DVI (XR-32X only). * 2 Items when inputting component signal through COMPUTER or DVI (XR-32X only), or when selecting S-VIDEO or VIDEO. PAGE 1 “Picture” menu “C.M.S.” SEL./ADJ. ReturnENTER END C. M. S. - H u e 0 0 0 0 C. M. S. - SaturationC. M. S. - Value 0 0 R Y G C B M C. M. S. Reset Reset
36 Menu Items (Continued) SEL./ADJ. ENTER END Resize Image Shift 0 0 Keystone OSD Display Background Setup Guide PRJ Mode LanguageFront English On Logo On Border PictureSCR - ADJPRJ - ADJ Help Closed Caption Off Main menu Sub menuSCR - ADJPage 43 Language Image Shift Resize Page 43 Page 43 Page 43 Page 43 Page 44 Page 44 Page 44 Page 44 Keystone OSD Display [On/Off] Background Setup Guide [On/Off] PRJ ModeLogo Blue None Page 44Closed CaptionOff CC1 CC2 Front Ceiling + Front Rear Ceiling + Rear +96 -96 +75 -75 +80 -80+40 -40 Normal Full Dot By Dot Area Zoom V-Stretch Border StretchNormal Area Zoom V-Stretch Border Stretch COMPUTER/ DTVVIDEO/ S-VIDEO English Deutsch Español Nederlands Français Italiano Svenska Português polski Magyar Türkçe *3 *4 *3 *4 “Screen adjustment (SCR-ADJ)” menu SEL./ADJ. ENTER END Auto Power Off System Sound System Lock hOn On Auto Restart On STANDBY Mode Standard 0min 0 Lamp Timer(Life) 100% Auto Sync OnPicture SCR - ADJPRJ - ADJHelp Speaker OnAudio Input Audio 1RS-232C 9600bpsFan Mode Normal Disable Main menu Sub menuPRJ - ADJPage 45 STANDBY Mode System Sound [On/Off] Speaker [On/Off] System Lock [Enable/Disable] Lamp Timer(Life)Page 45 Auto Restart [On/Off]Page 45 Auto Power Off [On/Off]Page 45 Page 45 Page 45 Page 46 Page 47 Fan ModePage 46Normal High RS-232CPage 469600bps 115200bps Audio InputPage 46Audio 1 Audio 2 Standard Eco Auto Sync [On/Off] Page 45 *5 “Projector adjustment (PRJ-ADJ)” menu *3 Adjustment range for XR-32X. *4 Adjustment range for XR-32S. * 5 This item is available for XR-32X only.