Sharp Xr 1s Projector User Manual

27
Basic
Operation
About the Setup Guide
After turning on the projector, the Setup
Guide screen appears to assist you with
projector setup.
Adjust the projector by following the il-
luminated buttons or Setup Guide indi-
cators.
PressTENTER to turn off the Setup
Guide screen.
Guidance items
1 FOCUS
2 HEIGHT ADJUST
3 ZOOM
ON/STANDBY
button
ENTER button
1 Adjusting the Focus
You can adjust the focus with the focus
ring on the projector.
Image Projection
Rotate the focus ring to adjust the fo-
cus while...

28
2 Adjusting the Height
The height of the projector can be ad-
justed using the adjustment feet at the
front and rear of the projector.
When the screen is in a higher position
than the projector, the projection image
can be made higher by adjusting the
projector.
1
2
3
• Do not apply too much pressure on the pro-
jector when the front adjustment foot comes
out.
• When lowering the projector, be careful not to
get your fingers caught in the area between
the adjustment foot and the projector.
Use the...

29
Basic
Operation
Displaying the Black Screen
and Turning off the Sound
Temporarily
Adjusting the Volume
Switching the Input Mode
PressCINPUT 1, DINPUT 2 or
EINPUT 3 on the remote control to se-
lect the input mode.
• When pressing INPUT (W/Y) on the projector,
input mode switches in order of
INPUT1 INPUT2 INPUT3.
• When “Auto Search” is set to “On”, INPUT (W/
Y) on the projector functions as the Auto Search
buttons. (See page 47.)
Select the appropriate input mode for
the connected equipment.
PressK/L...

30
XR-1X XR-1S
Resize Mode
This function allows you to modify or customize the resize mode to enhance the input image. De-
pending on the input signal, you can choose “NORMAL”, “BORDER” or “STRETCH” image.
PressHRESIZE.• See page 43 for setting on menu screen.
Computer
Input Signal
NORMALOutput screen image
Computer
Image type BORDER STRETCH
SXGA
(1280K1024)Resolution
lower than
SVGA
SVGA
Resolution
higher than
SVGA
1280K720
4:3 aspect ratio
5:4 aspect ratio
16:9 aspect ratio
* Mode for projecting an...

31
Basic
Operation
VIDEO
• “STRETCH” is fixed when 540P, 720P or 1080I signals are entered.
: Cutout area on which images cannot be projected.
: Area on which the image is not included in the original signals.Input Signal
DVD / Video Image typeOutput screen image
NORMAL BORDER STRETCH
480I, 480P, NTSC,
PAL, SECAM
540P, 720P, 1080I
(16:9)
4:3 aspect ratio
Letter box
Squeezed 16:9 image
Squeezed 4:3 image
16:9 aspect ratio
16:9 aspect ratio
(4:3 aspect ratio in
16:9 screen)
* Mode for projecting an image...

32
Auto Sync (Auto Sync Ad-
justment)
Adjusting/Operating with the Remote Control
Freezing a Moving Image
• When the optimum image cannot be achieved
with Auto Sync adjustment, use the help menu
for manual adjustments. (See page 51.)
Auto Sync function works when detect-
ing input signal after the projector turns
on.
PressFAUTO SYNC to manually ad-
just with Auto Sync function.
PressNFREEZE.
• The projected image is frozen.
PressNFREEZE again to return
to the moving image from the cur-
rently connected...

33
Useful
Features
Using Mouse Function
When connecting the projector and computer with the USB terminals, you can
use the remote control as the computer mouse.
Note
MOUSE/Adjuatment
button (P/R/O/Q)
Connect the projector and the
computer with the supplied RGB/
USB cable.1
2
Use the mouse functions.• MOUSE/Adjustment button (P/R/O/Q)
functions to move cursor.
•IL CLICK button functions as the left
click.
•JR CLICK button functions as the right
click.
•IL CLICK and JR CLICK have com-
mon function when...

34
The following shows the items that can be set in the projector.
Menu Items
“SCR - ADJ” menu
INPUT 1 (Component)/INPUT 2/INPUT 3 INPUT 1 (RGB)
“Picture” menu
Picture
Picture Mode
Contrast 0
0
0
0
K 7500SCR - ADJ PRJ - ADJ Help
BrightRedBlueCLR TempBright Boost
sRGBOff Standard
Off
Reset
SEL./ADJ. ENTER END
Picture
Picture Mode
Contrast 0
0
0
0
K 7500SCR - ADJ PRJ - ADJ Help
BrightColorTint0 SharpCLR TempBright Boost
ProgressiveOff
3D Progressive Standard
Reset
SEL./ADJ. ENTER END
Picture
Resize
Image...

35
Useful
Features
“PRJ - ADJ” menu
Picture
Eco/Quiet ModeSCR - ADJPRJ - ADJHelp
Auto Search
Auto Power Off
Guide LEDs
System Sound
System LockOn
h On On On On
SEL./ADJ. ENTER END0 Lamp Timer(Life) 100%
Picture
There is no picture or audioSCR - ADJ PRJ - ADJHelp
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL. ENTER END
Main menu Sub menuPRJ - ADJPage47Eco/Quiet Mode...

36
Using the Menu Screen
Menu Selections (Adjustments)
The menu can be operated to achieve two functions, adjustment and setting. (For setting the menu
items, see pages 38 and 39.)
Example: Adjusting “Bright”.
• This operation can also be performed by using the buttons on the projector.
PressBMENU.• The “Picture” menu screen for the se-
lected input mode is displayed.
MOUSE Adjustment
button (P/R/O/Q)
Example: “Picture” screen menu for INPUT 1
(RGB) mode
PressQ or O to display the other
menu screen.
•...