Sharp Xr 1s Projector User Manual
Have a look at the manual Sharp Xr 1s Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
27 Basic Operation About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Adjust the projector by following the il- luminated buttons or Setup Guide indi- cators. PressTENTER to turn off the Setup Guide screen. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM ON/STANDBY button ENTER button 1 Adjusting the Focus You can adjust the focus with the focus ring on the projector. Image Projection Rotate the focus ring to adjust the fo- cus while watching the projected image. Setup Guide screen • The Setup Guide screen automatically high- lights the items in order of 1 FOCUS 3 ZOOM 4 ENTER2 HEIGHT ADJUST. • You can adjust the focus, height or zoom any- time you want, regardless of the selection on the Setup Guide. • If you do not want to display the Setup Guide for the next time, set “Menu” - “SCR - ADJ” - “Setup Guide” to “Off”. (See page 45.) Note Focus ring Adjusting the Projected Image Setup Guide indicator
28 2 Adjusting the Height The height of the projector can be ad- justed using the adjustment feet at the front and rear of the projector. When the screen is in a higher position than the projector, the projection image can be made higher by adjusting the projector. 1 2 3 • Do not apply too much pressure on the pro- jector when the front adjustment foot comes out. • When lowering the projector, be careful not to get your fingers caught in the area between the adjustment foot and the projector. Use the rear adjustment foot to make the projector level. • The projector is adjustable ±1 degree from the standard position. Remove your hands from the HEIGHT ADJUST button of the projector after its height has been finely adjusted. • The angle of projection is adjustable up to 7.5 degrees from the surface on which the projector is placed. Lift the projector to adjust its height while pressing the HEIGHT ADJUST button. HEIGHT ADJUST button Info Rear adjustment foot 3 Adjusting the Screen Size You can adjust the screen size using the zoom knob on the projector. • When adjusting the height of the projector, trapezoidal distortion occurs. When “Auto Keystone” is set to “On”, keystone correction functions automatically to correct trapezoidal distortion. When you want to adjust the auto- matically corrected image, use the manual keystone correction. (See page 44.) Note zoom in zoom out Zoom Knob Image Projection (Continued)
29 Basic Operation Displaying the Black Screen and Turning off the Sound Temporarily Adjusting the Volume Switching the Input Mode PressCINPUT 1, DINPUT 2 or EINPUT 3 on the remote control to se- lect the input mode. • When pressing INPUT (W/Y) on the projector, input mode switches in order of INPUT1 INPUT2 INPUT3. • When “Auto Search” is set to “On”, INPUT (W/ Y) on the projector functions as the Auto Search buttons. (See page 47.) Select the appropriate input mode for the connected equipment. PressK/L on the remote control or V/X on the projector to adjust the vol- ume. • Pressing K/V will lower the volume. • Pressing L/X will raise the volume. On-screen Display PressMAV MUTE on the remote con- trol to temporarily display a black screen and turn off the sound. • Pressing MAV MUTE again will turn the pro- jected image back on. Volume buttonsINPUT buttons AV MUTE button On-screen Display Note Note
30 XR-1X XR-1S Resize Mode This function allows you to modify or customize the resize mode to enhance the input image. De- pending on the input signal, you can choose “NORMAL”, “BORDER” or “STRETCH” image. PressHRESIZE.• See page 43 for setting on menu screen. Computer Input Signal NORMALOutput screen image Computer Image type BORDER STRETCH SXGA (1280K1024)Resolution lower than SVGA SVGA Resolution higher than SVGA 1280K720 4:3 aspect ratio 5:4 aspect ratio 16:9 aspect ratio * Mode for projecting an image with the original aspect ratio without cutting any portions. RESIZE button SVGA (800 K 600) XGA (1024 K 768) SXGA (1280 K 960) SXGAL (1400K 1050)SXGA (1280K 1024)1280K 720 1024K 768 800K 600 J J 768K 576 600K 450 J J 1024K 576 800K 450 XR-1X XR-1S XR-1X XR-1S XR-1X XR-1S 1024K 576 800K 450 800K 600 1024K 768 600K 450 768K 576 1024K 576 800K 450 NORMALBORDER STRETCH Other aspect ratios4:3 aspect ratio :Cutout area on which images cannot be projected. Image Projection (Continued) Resolution lower than XGA XGA Resolution higher than XGA
31 Basic Operation VIDEO • “STRETCH” is fixed when 540P, 720P or 1080I signals are entered. : Cutout area on which images cannot be projected. : Area on which the image is not included in the original signals.Input Signal DVD / Video Image typeOutput screen image NORMAL BORDER STRETCH 480I, 480P, NTSC, PAL, SECAM 540P, 720P, 1080I (16:9) 4:3 aspect ratio Letter box Squeezed 16:9 image Squeezed 4:3 image 16:9 aspect ratio 16:9 aspect ratio (4:3 aspect ratio in 16:9 screen) * Mode for projecting an image with the original aspect ratio without cutting any portions.
32 Auto Sync (Auto Sync Ad- justment) Adjusting/Operating with the Remote Control Freezing a Moving Image • When the optimum image cannot be achieved with Auto Sync adjustment, use the help menu for manual adjustments. (See page 51.) Auto Sync function works when detect- ing input signal after the projector turns on. PressFAUTO SYNC to manually ad- just with Auto Sync function. PressNFREEZE. • The projected image is frozen. PressNFREEZE again to return to the moving image from the cur- rently connected device. 1 2 Note FREEZE button PICTURE MODE button Selecting the Picture Mode PressGPICTURE MODE.• When pressing GPICTURE MODE, the picture mode changes in order of Standard Presentation Cinema Game. You can select the suitable picture mode for the projected image, such as movie or video game. AUTO SYNC button • See page 40 for details on the picture mode. Note
33 Useful Features Using Mouse Function When connecting the projector and computer with the USB terminals, you can use the remote control as the computer mouse. Note MOUSE/Adjuatment button (P/R/O/Q) Connect the projector and the computer with the supplied RGB/ USB cable.1 2 Use the mouse functions.• MOUSE/Adjustment button (P/R/O/Q) functions to move cursor. •IL CLICK button functions as the left click. •JR CLICK button functions as the right click. •IL CLICK and JR CLICK have com- mon function when your computer sup- ports only a one-click mouse, such as Macintosh. To RGB output terminal To USB terminal RGB/USB Cable • you can not use this function when displaying the menu screen. L CLICK button R CLICK button Computer mouse To USB terminal To INPUT1 terminal Supplied accessoryRGB/USB Cable
34 The following shows the items that can be set in the projector. Menu Items “SCR - ADJ” menu INPUT 1 (Component)/INPUT 2/INPUT 3 INPUT 1 (RGB) “Picture” menu Picture Picture Mode Contrast 0 0 0 0 K 7500SCR - ADJ PRJ - ADJ Help BrightRedBlueCLR TempBright Boost sRGBOff Standard Off Reset SEL./ADJ. ENTER END Picture Picture Mode Contrast 0 0 0 0 K 7500SCR - ADJ PRJ - ADJ Help BrightColorTint0 SharpCLR TempBright Boost ProgressiveOff 3D Progressive Standard Reset SEL./ADJ. ENTER END Picture Resize Image Shift 0 0SCR - ADJPRJ - ADJ Help KeystoneAuto Keystone OSD Display Background Setup Guide PRJ Mode LanguageFront English On Logo On Off Normal SEL./ADJ. ENTER END Main menu Sub menuPicturePage40 +30 -30Contrast +30 -30 +30 -30 +30 -30 +30 -30+30 -30+30 -30 Tint Color Sharp Bright Red Blue *2 *2 *2 *1 *1 Progressive sRGB [On/Off]*2 *1 Reset5500K 6500K 7500K 8500K 9300K 10500K 2D Progressive 3D Progressive Film Mode CLR Temp Bright Boost [On/Off] Page40 Page40 Page41 Page41 Page42 Page42 Standard Presentation Cinema Game Picture Mode Main menu Sub menuSCR - ADJPage43 Language Image Shift Resize Page43 Page43 Page44 Page44 Page44 Page45 Page45 Page46 Page46 Keystone Auto Keystone [On/Off] OSD Display [On/Off] Background Setup Guide [On/Off] PRJ ModeNormal Border Stretch Logo Blue None Front Front + Rotate Rear Rear + Rotate English Deutsch Español Nederlands Français Italiano Svenska Português [XR-1X] +127 -127 [XR-1S] +100 -100 [XR-1X] +96 -96[XR-1S] +75 -75 *1 Items when inputting RGB signal through INPUT 1 * 2 Items when inputting component signal through INPUT 1, or when selecting INPUT 2 or INPUT 3 • You can adjust the menu items with icons (and) using the respective buttons on the remote control.
35 Useful Features “PRJ - ADJ” menu Picture Eco/Quiet ModeSCR - ADJPRJ - ADJHelp Auto Search Auto Power Off Guide LEDs System Sound System LockOn h On On On On SEL./ADJ. ENTER END0 Lamp Timer(Life) 100% Picture There is no picture or audioSCR - ADJ PRJ - ADJHelp Vertical stripes or flickering image appear Data image is not centered Color is faded or poor Picture is dark The image is distorted Reset all adjustments to default settings SEL. ENTER END Main menu Sub menuPRJ - ADJPage47Eco/Quiet Mode [On/Off] Auto Search [On/Off] Auto Power Off [On/Off] Guide LEDs [On/Off] System Sound [On/Off] System Lock Lamp Timer(Life)Page47 Page47 Page48 Page48 Page50 Page49 Page50 Old Code New Code Reconfirm “Help” menuThe items you can set with “Help” menu “Help” menu n Page 51• Vertical stripes or flickering image appear Auto Sync Adjust vertical noise Adjust horizontal noise • Data image is not centered Auto Sync H-Pos V-Pos • Color is faded or poor INPUT 1 Signal type: Auto/RGB/Component INPUT 2 or INPUT 3 Video System:Auto/PAL/SECAM/ NTSC3.58/NTSC4.43/PAL- M/PAL-N/PAL-60 * The selectable items vary depending on the in- put signal and the selected input mode.
36 Using the Menu Screen Menu Selections (Adjustments) The menu can be operated to achieve two functions, adjustment and setting. (For setting the menu items, see pages 38 and 39.) Example: Adjusting “Bright”. • This operation can also be performed by using the buttons on the projector. PressBMENU.• The “Picture” menu screen for the se- lected input mode is displayed. MOUSE Adjustment button (P/R/O/Q) Example: “Picture” screen menu for INPUT 1 (RGB) mode PressQ or O to display the other menu screen. • The selected menu item is highlighted. 1 2 ENTER button RETURN button Menu item Picture Picture Mode Contrast 0 0 0 0 K 7500SCR - ADJ PRJ - ADJ Help BrightRedBlueCLR TempBright Boost sRGBOff Standard Off Reset SEL./ADJ. ENTER END MENU/HELP button Operating with the projector When “PRJ - ADJ” - “Guide LEDs” is set to “On”, the buttons used for menu adjustment on the projector light up. Example: When W,Y and the MENU/HELP button light up on the projector, you can use those buttons for operation. Adjustment buttons (W/Y/V/X) MENU/HELP button ENTER button