Sharp Xr 1s Projector User Manual

7
Introduction
15. OverloadingDo not overload wall outlets, extension cords, or
integral convenience receptacles as this can
result in a risk of fire or electric shock.
16. Object and Liquid EntryNever push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any
kind on the product.
17. ServicingDo not attempt to service this product yourself as
opening or removing covers...

8Be sure to read the following safeguards when setting
up your projector.
Caution concerning the lamp unit
■Potential hazard of glass par-
ticles if lamp ruptures. In case
of lamp rupture, contact your
nearest Sharp Authorized
Projector Dealer or Service
Center for a replacement.
See “Replacing the Lamp” on
page55.
Caution concerning the setup of the pro-
jector
■For minimal servicing and to maintain high
image quality, SHARP recommends that this
projector be installed in an area free from
humidity, dust...

9
IntroductionCaution regarding transportation of the
projector
■When transporting the projector, be sure not
to subject it to hard impact and/or vibration,
as this can result in damage. Take extra care
with the lens. Before moving the projector,
be sure to unplug the power cord from the
wall outlet, and disconnect any other cables
connected to it.
■Do not carry the projector by holding the lens.
■When transporting the projector, be sure to
place the projector in the supplied soft case.
(See page 11.)...

10
PDF operation manuals in several languages are included in the CD-ROM,
so that you can work with the projector, even if you do not have this manual.
To utilize these manuals, you need to install Adobe Reader on your com-
puter (Windows or Macintosh).
Please download Adobe Reader from the Internet (
http://www.adobe.com).
Accessing the PDF Manuals
For Windows:
1Insert the CD-ROM in the CD-ROM
drive.
2Double click the “My Computer” icon.
3Double click the “CD-ROM” drive.
4Double click the language (name...

11
IntroductionAccessories
Remote control
RRMCGA256WJSALithium battery
(CR2025)
UBATL0011TAZZ
Power cord*RGB/USB cable
(6' (1.8 m))
QCNWGA047WJPZ
Soft case
GCASNA011WJZZ• Projector manual CD-ROM
UDSKAA045WJN1
• Operation manual (this manual)
Optional accessories
■3 RCA to 15-pin D-sub cable (9n10o (3.0 m))
■Lamp unitAN-C3CP
AN-XR1LP
Supplied accessories
For U.S., Canada,
etc.
(6' (1.8 m))
QACCDA029WJPZFor Europe, except
U.K.
(6' (1.8 m))
QACCVA006WJPZFor U.K., Hong Kong
and Singapore
(6'...

12
36
36
5454
36
51
29
28
28
27
15
27
26
54
29
Top View
ON/STANDBY button
For turning the power
on and putting the
projector into standby
mode. Lamp indicator
Temperature warning
indicator
Adjustment buttons
(W/Y/V/X)
For selecting menu
items.Volume buttons (V/X)
For adjusting the
speaker sound level.
ENTER button
For setting items
selected or adjusted
on the menu.MENU/HELP button
For displaying
adjustment and
setting screens, and
help screen.
Front View
Focus ring
For adjusting the
focus.
Zoom knob
For...

13
Introduction
33
52
15
23
23
24
25
24
25
25
28
52
Numbers in Z refer to the main pages in this operation manual where the topic
is explained.
Terminals
Side View
Refer to “INPUT Terminals and Connectable Main Equipment” on page 21.
INPUT 1 terminal
Terminal for computer
RGB and component
signals.
AUDIO INPUT
terminal INPUT 2 terminal
Terminal for connect-
ing video equipment
with an S-video
terminal.
INPUT 3 terminal
Terminal for connect-
ing video equipment.
Intake ventRear adjust-
ment foot...

14
Inserting the Lithium Battery
Insert the battery holder into the remote control. Insert the supplied lithium battery (CR2025).
• Insert the lithium battery with the + side of the battery facing the
+ mark of the battery holder.
Pull the battery holder. While pressing the tab (1), pull the battery holder
(2).
1
2
3
29
32
30
32
29
33
29
2636
33
33
51
36
36
36
32
Part Names and Functions (Continued)
MOUSE/Adjustment
buttons (P/R/O/Q)
• For moving the computer
cursor when connecting
the projector USB...

15
Introduction
Notes the Use of the Lithium Battery
• The signal from the remote control can be re-
flected off a screen for easy operation. How-
ever, the effective distance of the signal may
differ depending on the screen material.
When using the remote control
• Be sure not to drop, expose to moisture or
high temperature.
• The remote control may malfunction under a
fluorescent lamp. In this case, move the pro-
jector away from the fluorescent lamp.
Usable Range
The remote control can be used to...

16
1. Place the projector facing a wall or a screen
Quick Start
This section shows the basic operation (projector connecting with the computer). For details, see
the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
When connecting equipment other than the computer, see
pages24 and 25.
3. Press the ON/STANDBY button to turn the projector on 2. Connect the projector to the computer and plug the power cord...